Product Overview & Specifications
- Energy Efficiency: This product contains a light source of energy efficiency class <E>. This product contains light sources of energy efficiency class <F>.
- Model: 835041
- Power: 5.7 W / 8 W
- Luminous Flux: 700 lm / 950 lm
- Total Power: 25.5 W
- Total Luminous Flux: 1,300 lm
- Light Source: LED board (not changeable)
- Lifespan: 25,000 h / 20,000 h
- Color Temperature: 2,700 K - 5,000 K
- Switching Cycles: 15,000 x
- Voltage: 230V / 50Hz~
- Connection: 230 Volt/50 Hz
- Wireless: 2.4 GHz, 10 dBm
- Response Time: Less than 0.5 seconds
- Remote Control: Included IR remote control
Fitting Instructions
Installation Type: As pendant light
The fitting instructions show how to install the light as a pendant. It involves attaching a mounting bracket to the ceiling using appropriate fasteners (screws, dowels, indicated by `2x` and `ca. 20x` for fasteners). Suspension wires are then connected, followed by the electrical wiring. Finally, the light fixture is mounted onto the bracket. Insert AAA, 1.5V batteries into the remote control.
Electrical Connection
Connect the mains supply to the designated terminals: Neutral (N), Live (L), and Ground. Ensure proper grounding.
Remote Control and ZigBee Integration
Teach Remote Control / ZigBee Integration
Refer to the Q-remote control manual for pairing instructions.
ZigBee Reset Procedure
To integrate the lamp into a ZigBee network, reset it to factory settings. Turn the lamp [power-symbol] on and off five times using the power switch. Maintain a pause of 5-10 seconds between the first few on/off cycles. Follow with pauses of 1-2 seconds between subsequent on/off cycles. The lamp will flash to confirm the reset to factory settings.
Domain im Kundenauftrag registriert
Neuhaus Lighting Group
