FITUEYES TT85 TV Stand with Mount Installation Guide
What's in the Box
The package contains the following components:
- Main stand base (1)
- Upright support poles (2)
- Top shelf/support (3)
- Lower shelf/support (4)
- TV mounting brackets (5, 6)
- Crossbars/stabilizers (7, 8)
- Hardware pack (9, 10) containing various screws, bolts, and tools.
Detailed diagrams show all included parts, numbered for easy identification.
Accessories for Installing TV
The following hardware is provided for mounting your TV to the stand:
- M-A x4 (M6x14 screws)
- M-B x4 (M6x30 screws)
- M-C x4 (M8x20 screws)
- M-D x4 (M8x12 screws)
- M-E x4 (M8x45 screws)
- M-F x4 (M8x35 screws)
- M-G x4 (M8x35 screws)
- Washers and nuts (various sizes, e.g., Ø16x08.2x1, Ø15x08.0x5, Ø16x8.5x1.0)
- Screws for TV mounting (e.g., M5x16, M5x30)
- Other hardware like Fx2, Gx1.
These are used to attach the TV to the mounting arms and secure the entire assembly.
Tools Required (Not Included)
A Phillips head screwdriver is typically required for assembly.
Installation Steps
Follow these steps to assemble your FITUEYES TT85 TV Stand:
Step 1: Prepare TV for Mounting
This step involves attaching the TV mounting arms to the back of your television. The manual illustrates two scenarios:
- (a) For flat-backed TVs: Use screws like M-E x4 or M-A x4, M-C x4, M-D x4, M-B x4 as appropriate for your TV's VESA mounting holes.
- (b) For irregular-backed TVs: Similar screw combinations are shown for TVs with non-flat backs.
Important Note: Do not fully tighten screws at this stage.
Step 2: Assemble the Stand Base
Assemble the main structure of the TV stand. This involves connecting the base components and upright poles using screws such as M-F x4, M-G x4, DX6, and AX4. Ensure all parts are aligned correctly.
Important Note: Do not fully tighten screws at this stage.
Step 3: Attach Top Support
Connect the top shelf or support piece to the upright poles using screws like CX4.
Step 4: Attach TV Mounting Brackets
Secure the TV mounting brackets to the upright poles of the stand using screws like AX4 and 9x4.
Step 5: Mount TV onto Stand
Carefully lift your television and hook it onto the attached mounting brackets. Ensure it is properly seated.
Step 6: Final Tightening
Once the TV is mounted and the stand is stable, proceed to fully tighten all screws used throughout the assembly process. This includes screws like BX4, EX4, and FX2.
Step 7 & 8: Final Assembly Check
The final steps involve checking the stability of the assembled TV stand and ensuring all connections are secure. Side views confirm the overall structure.
Step 9: Bracket Detail
A close-up view shows the secure connection of the TV to the mounting brackets using hardware like BX4 and EX4.
Step 10: Completed Installation
The installation is complete with the TV successfully mounted on the FITUEYES TT85 stand.
