UTV Stereo RGB Bluetooth Controller Kit Installation Guide

Product Overview

This document provides instructions for installing the UTV Stereo RGB Bluetooth Controller Kit (Part #: UTVS-RGB-BTKIT). This kit allows for wireless control of RGB lighting systems on UTVs.

Kit Components

The kit includes the following main components:

• Ground Wire: With a ring terminal.
• Constant Power Wire: With a ring terminal.
• Accessory Wire: With a ring terminal.
• Universal Bus Bar Adapter Harness: Connects to the accessory wires.
• Polaris® Pulse Bar Connector: For direct connection to Polaris Pulse systems.
• Bluetooth Controller Module: The central control unit, featuring the UTV Stereo logo and model number UTVS-RGB-BT.
• Low Current Harness: Connects the controller to the switch and power.
• 10 AMP Fuse: For power protection.
• Controller Harness Connector: Connects the controller module to the main harness.
• RGB Output Connectors: For connecting RGB LED strips or accessories.
• Dual Blue LED Rocker Switch: Features the UTV Stereo logo and 'SPEAKER LIGHTS' indicator.

Included Optional Wiring Accessories

The kit also comes with optional accessories for expanding lighting capabilities:

• 4x RGB Splitters: To connect multiple RGB accessories to a single output.
• 8x RGB Pigtails: Individual connectors for RGB accessories.
• 1x Alternative Power Harness: For connecting directly to a power source without a bus bar.

Installation Steps

1. Step 1: Mount the dual blue LED rocker switch to your desired location in the UTV.
2. Step 2: Connect the Bluetooth® harness to the low current harness. Mount the Bluetooth controller module to the vehicle using the included 3M adhesive pad.
3. Step 3: To connect RGB accessories:
   • If using a UTV Stereo plug-and-play harness (sold separately), connect one of the RGB output connectors from the controller's harness to the RGB input connector of the UTV Stereo system harness.
   • For all other installations, use the included optional wiring accessories (RGB Splitters or RGB Pigtails) to connect one or more RGB LEDs to the controller's RGB output connectors.
4. Step 4: Route the main harness to your Polaris Pulse Bar or factory bus bar.
   • For Polaris Pulse Bar Installation: Route the Polaris Pulse plug from the switch and connect it directly to the Pulse bar.
   • For Universal Install: Route the bus bar wires using the universal adapter harness from the switch to the factory bus bar.

Power Configuration Options

Option 1: Constant Power (Bluetooth controller works anytime, regardless of key position)

• Red Ring Terminal: Connects to a constant power post (fused by 10 amp).
• Yellow Ring Terminal: Connects to an ACC (Accessory) post, used to light up the lower LED on the switch.
• Black Ring Terminal: Connects to a ground post.

Option 2: ACC Power (Bluetooth controller works only when the vehicle key is on)

• Red Ring Terminal: Connects to an ACC (Accessory) Post - Accessory Power (fused by 10 amp).
• Yellow Ring Terminal: Connects to an ACC (Accessory) Post - Acc Power used to light up the lower LED on the switch.
• Black Ring Terminal: Connects to a ground post.

Important Note

If you have a UTV Stereo 2nd Battery Kit installed in your vehicle, ensure your power source is properly connected to the accessory battery.