Product Overview
We are committed to providing tools with competitive prices. The terms "Save Half" or "Half Price" represent an estimate of potential savings compared to major top brands and do not necessarily apply to all product categories. Please verify savings carefully when placing an order.
Need Help? Contact Us!
For product questions or technical support, please feel free to contact us:
This document contains original instructions. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret this user manual. The appearance of the product is subject to the item received. We will not provide further notice for technology or software updates.
Product Image
A VEVOR brand tile cutter, model 8102E-8L, is shown. It is a long, linear cutting tool with a base, a sliding cutting head, and a handle for applying pressure. A ruler attachment is visible on the side.
Specifications
| Model | 8102E-8L/32" | 8102E-8L/40" | 8102E-8L/48" |
|---|---|---|---|
| Maximum Cutting Length | 800mm | 1000mm | 1200mm |
| Maximum Cutting Thickness | 15mm | 15mm | 15mm |
| Cutting Wheel Size | Φ22x6x6mm | ||
Safety Information
⚠️ Warning - To reduce the risk of injury, user must read instructions manual carefully.
⚠️ This symbol indicates a precaution, warning, or danger. Ignoring it may lead to an accident. Follow recommendations to reduce risk of injury, fire, or electrocution.
? Warning- Be sure to wear eye protectors when using this product.
? Warning- Be sure to wear gloves when using this product.
Warning
Read and understand all instructions before using this tile cutter. The operator must follow basic precautions to reduce the risk of personal injury and/or damage to the equipment.
Work Area & Personal Safety
Familiarize yourself with the hazard notices in this manual. Notices alert you to potential property damage, injury, or death if instructions are not followed.
Work Area
- Operate in a safe, clean, well-lit work environment, free of distractions.
- Keep individuals not wearing appropriate safety equipment away from the work area.
- Store tools properly in a safe, dry location to prevent rust or damage. Lock the tile cutter away and keep it out of reach of children.
- Always place the tile cutting machine on a level and firm surface.
Personal Safety
WARNING!
Wear personal protective equipment approved by the Canadian Standards Association (CSA) or American National Standards Institute (ANSI).
Personal Protective Equipment
- Always wear impact safety goggles providing front and side eye protection, complying with CSA Z94.3-07 or ANSI Z87.1 standards.
- Wear gloves providing protection based on work materials or to reduce tool vibration effects.
- Caution! The edges of cut tiles are sharp.
Personal Precautions
Control the tile cutter, personal movement, and work environment to avoid injury or damage.
- Do not operate when tired or under the influence of drugs, alcohol, or medications.
- Avoid wearing clothes or jewelry that can become entangled with moving parts. Keep long hair covered or bound.
Specific Safety Precautions
- The tile cutting machine has a replaceable circular blade. Keep the tile cutter and blade away from children.
- Use the correct tile cutter for the job; this cutter is designed for a specific function. Do not modify or alter it for unintended purposes.
- After use, store the machine in a safe and dry place.
- This machine is designed for cutting and breaking ceramic, glazed, porcelain, and polished tiles with a flat surface. It shall not be used for any other purpose.
WARNING!
DO NOT let comfort or familiarity with the product replace strict adherence to safety rules. Unsafe or incorrect use can cause serious personal injury.
WARNING!
Direct exposure of pressurized air or fluids to skin could result in severe bodily injury.
SAVE THESE INSTRUCTIONS
Parts List
The diagram shows the tile cutter components:
- 1 Cutter (1 piece)
- 2 Ruler (1 piece)
- 3 AAA Battery (2 pieces) - *Note: Batteries are for optional laser guide.*
- 4 Spare Cutting Wheel (Φ22x6x6mm, 1 piece)
Diagram also illustrates 'Insert' and 'Fix' positions for the cutting mechanism.
Operation
Straight Cutting
- Step 1: Place the cutting wheel on the rear edge of the tile. Ensure the breaker is upward, engaging with the sliding bar. Slide the wheel forward by pushing the handle down with medium pressure to score the tile surface. Make one continuous motion, scoring only once. (Diagram shows scoring motion along tile edge).
- Step 2: After scoring, without moving the tile, position the breaker slightly forward at the tile's front edge. (Diagram shows breaker positioned at front).
- Raise the handle slightly and release the breaker so it lies flat on the tile. Apply increasing pressure until the tile snaps along the score line. (Diagram shows breaker lowering onto tile; 5-10mm distance indicated).
Tips:
- After scoring, it is better to pull back the handle to let the breaker backtrack 5-10mm for optimal breaking position.
- Do not press in the middle or the end of the tile.
(Diagram shows breaker positioning and snapping action. Arrows indicate movement.)
Diagonal Cutting
- Step 1: Place the tile on the machine against the adjusted angle ruler. (Diagram shows tile angled on machine).
- Place the cutting wheel on the rear edge of the tile. Slide the wheel forward with medium pressure to score the surface. Make one continuous motion. (Diagram shows scoring motion).
- After scoring, position the breaker slightly forward at the tile's front edge. (Diagram shows breaker positioned at front).
- Raise the handle slightly and release the breaker so it lies flat. Apply increasing pressure until the tile snaps along the score line. (Diagram shows breaker lowering; 5-10mm indicated).
Tips:
- After scoring, pull back the handle to let the breaker backtrack 5-10mm for optimal breaking position.
Blade Replacement
Use a screwdriver to replace the blade. (Diagram shows cutting head assembly with screwdriver icon indicating tool location).
Laser Device Instruction
The laser device requires 2pcs AAA batteries.
The diagram shows the laser module with four adjustment screws (1, 2, 3, 4).
- 1. There are four screws for the laser device.
- 2. If the laser is biased to the left, adjust screw No. 2 clockwise or screw No. 1 counterclockwise.
- 3. If the laser is biased to the right, adjust screw No. 1 clockwise or screw No. 2 counterclockwise.
- 4. When the laser irradiation is too far/high, adjust screws No. 3 and 4 clockwise.
- 5. When the laser irradiation is too close/low, adjust screws No. 3 and 4 counterclockwise.
Addresses
Original Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to USA: VEVOR STORE INC, 9448 RINCHMOND PL #E, RANCHO CUCAMONGA, California, 91730 United States of America
UK REP: Pooledas Group Ltd, Unit 5 Albert Edward House, The Pavilions, Preston, United Kingdom
EC REP: SHUNSHUN GmbH, Römeräcker 9 Z2021, 76351 Linkenheim-Hochstetten, Germany
Origin: Made In China
