VEVOR Towel Warmer Cabinet

Product Overview

VEVOR is committed to providing tools with competitive prices. The VEVOR RTD-8L Towel Warmer Cabinet offers an efficient way to heat and dry towels. This document serves as the original instruction manual, providing essential information for safe and effective operation.

The appearance of the product is subject to the item received. VEVOR reserves the right to update product technology or software without prior notice.

For Your Safety

Read all instructions carefully before operating the appliance. Even if you are familiar with similar appliances, it is important to follow these guidelines.

• [⚠️] Warning: To reduce the risk of injury, user must read instructions manual carefully.
• Young children should be supervised to ensure they do not play with the appliance.
• Always unplug the warmer when not in use.
• Do not operate the warmer with a damaged cord or plug, or if it has malfunctioned, been dropped, or damaged in any manner.
• Never locate the warmer where it may fall into a bathtub, shower, swimming pool, or any other water container.
• Towels, steam, racks, and internal surfaces of the appliance are HOT and can be dangerous. Exercise special care when reloading or removing hot towels, racks, or trays. Always use protective gloves when handling hot items.
• To avoid burns, do not place "hot" towels directly from the warmer onto bare surfaces of human bodies.
• Do not place heavy objects or containers of water on or in the cabinet.
• Do not leave the door open. Do not run the power cord under carpeting or cover it with throw rugs, runners, or similar items. Arrange the cord away from traffic areas to prevent tripping.
• To disconnect, set the control to OFF and remove the plug from the outlet. Do not abuse the cord; never carry the appliance by the cord or yank it to disconnect. Grasp the plug firmly.
• Do not attempt to repair, disassemble, or modify the appliance. There are no user-serviceable parts.
• Use the unit only as directed in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury.

Compulsory Warning

• No user-serviceable parts inside. Unauthorized modification voids warranty.
• Before first use, read and follow all instructions in this booklet.
• Pay particular attention to the section dealing with IMPORTANT SAFEGUARDS and keep this booklet handy for future reference.
• The Towel Warmer is designed to function quietly and safely under normal circumstances.
• Check that the voltage marked on the product corresponds with your supply voltage.

Warning: This appliance must be earthed.

Cautions: When the device is turned on, it will take some time to start heating.

Compliance Information

[FCC compliance] This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

[♻️] This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycling electrical and electronic devices.

Instructions

Thank you for choosing this towel warmer cabinet. Please read all instructions before use for best results.

Diagram Description

The diagram illustrates the VEVOR RTD-8L Towel Warmer Cabinet. Key components are labeled: Doorframe, Power plug, UV Switch (for UV sterilization feature), Power Switch, Ultraviolet bulb (for UV sterilization feature), Drain tray, Wire baskets, and Cabinet gasket. The views provided are 'Front sight (Side open door)' and 'Side sight (Fold-down door)'.

Product Parameter

Package Details

Before Operation

• Remove all packing material before use.
• Place the unit on a well-ventilated, flat, sturdy surface away from heat sources. Do not use near water (e.g., bathtub, washbowls) where immersion may occur. Keep at least 30mm away from walls and other objects.
• Plug the cord into a power outlet.
• Remove the wire basket and set it aside.

Operation

1. Fold or roll damp or pre-moistened towels (not soaked) into the wire basket. Wring out water several times to shorten heating time.
2. The inside wall temperature reaches 158-176°F (70-80°C). 100% cotton dry towels can also be used, but avoid other cloths that cannot withstand this temperature. Limit heating to less than 2 hours. Keep towels away from the inner wall of the warmer.
3. Do not overload the wire basket or place towels directly into the warmer without the basket.
4. Close the door firmly and press the Power button to turn on. The indicator light will illuminate, showing the cabinet has started heating.
5. In approximately 1.5-2.5 hours, depending on the number of towels, the internal temperature will reach and automatically maintain 158-176°F (70-80°C) with the door closed. Avoid opening the cabinet when towels are heated.
6. Turn off the power button if you need to add more towels; the heating process will restart. The thermostat automatically stops working at 158-176°F (70-80°C). It is safe to keep the unit on.
7. If desired, press the UV button to activate the EPA-registered UV sterilization system. The indicator light will show the UV light is working. Allow 30 minutes for sterilization to complete.
8. To open the door, first turn off the power, ensuring the indicator light is off. Stand at a safe distance from the door opening to avoid burns from high-temperature steam. Remove towels using tongs or heat-resistant gloves.
9. Towels may be very hot for immediate application. Use caution before applying to the face or body.

Maintenance

1. Turn OFF the unit.
2. Unplug the cord from the outlet.
3. Wait for contents to cool before handling, as they may be hot. Remove the wire basket and towels. Set the wire basket aside to dry.
4. Wipe down internal surfaces with a soft cloth. Do not use harsh chemicals or abrasives. For exterior cleaning, use a soft cloth and mild soap.
5. Pull the drip tray forward to empty its contents. Set the drip tray aside to dry.

Troubleshooting

1. Excessive Moisture or Slow Heating: Check that towels are only slightly damp. Excess moisture or slow heating may result from using soaked towels.
2. Door Not Closing Properly / Steam Escaping: Ensure the silicone door seal is in place. Push it into the door groove to assure a proper fit.

Correct Disposal

This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through [♻️] indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycling electrical and electronic devices.