Ubiquiti UniFi Gate Hub Installation Guide

System Overview

The UniFi Gate Hub is designed to manage gate access, integrating with gate operator control boards and various accessories.

Gates that Close Manually: The system can control gates that operate manually.

The Gate Hub connects to a Gate Operator Control Board, which is supplied by the gate manufacturer.

The Gate Operator Control Board features terminals for:

• GATE OPERATOR
• GATE EXIT REQUEST
• GATE POSITION
• SIDE DOOR EXIT REQUEST
• SIDE DOOR LOCK
• SIDE DOOR POSITION
• EMERGENCY
• AUX
• 12V-1A Power Input

Optional Accessories

Optional LPR Cameras

The UniFi Gate Hub can integrate with various AI LPR (License Plate Recognition) cameras:

• AI Turret [Buy]
• AI Dome [Buy]
• AI Theta [Buy]
• AI Bullet [Buy]
• AI Pro [Buy]
• AI DSLR [Buy]
• AI LPR [Buy]

Other Accessories

• Access Button [Buy]
• Intercom [Buy]
• Protect AI Camera
• Garage Position Sensor (Supplied by Gate Manufacturer)
• Entrapment Protection Sensor (Supplied by Gate Manufacturer)
• Siren
• Fire Relay

Installation Steps

Step 1: Mounting Bracket Installation

The Gate Hub includes a mounting bracket (labeled 'b').

Mark the desired mounting location on a wall using a pencil.

Drill pilot holes using a drill bit of Ø6 mm (Ø1/4").

Attach the mounting bracket to the wall using M4 screws (2x labeled 'c', 2x labeled 'd').

Step 2: Mounting the Gate Hub

The Gate Hub (labeled 'a') is powered via PoE++.

Connect the Gate Hub to the PoE++ power source.

Mount the Gate Hub onto the installed bracket.

Step 3: Connecting Gate Operator

Connect the Gate Hub to the Gate Operator Control Board. Specific wiring details depend on the gate manufacturer's board.

The diagram shows the Gate Hub connected to the Gate Operator Control Board, which is part of the gate mechanism.

Step 4: Connecting External Power and Siren

Connect external power (12-24 V, <1 A) if required by the setup.

Connect a siren to the Gate Hub for audible alerts.

Step 5: Network Integration

The Gate Hub connects to the network via a UniFi Cloud Gateway and switching infrastructure.

The network path is typically: UniFi Cloud Gateway → Switching → PoE++ Injector/Switch → Gate Hub.

The Gate Hub requires internet connectivity for full functionality.

Step 6: Mobile App Setup

Download the UniFi Access mobile application from the App Store or Google Play Store.

Use the app to configure and manage the Gate Hub and access control.

Support

For further assistance, visit the UniFi Help Center or contact Ubiquiti Support.