Aigostar LED Flood Light
Product Overview
This document provides instructions and specifications for Aigostar LED Flood Lights, designed for efficient outdoor illumination.
Safety Information
Important Safety Precautions:
- Installation must be carried out by a qualified electrician.
- Ensure the power supply is disconnected before installation or maintenance.
- This LED module light fixture is suitable for installation on a non-combustible surface only.
- The product should only be replaced by the manufacturer or its service agent.
- Ensure the product is suitable for the intended application and environment.
- The product is designed for outdoor use, with an IP65 rating for dust and water protection.
- Verify the product's voltage compatibility (220-240V).
Similar safety information is available in multiple languages within the original document.
Product Specifications
Key specifications for Aigostar LED Flood Lights:
| Feature | Specification |
|---|---|
| Brand | Aigostar |
| Product Type | LED Flood Light with PIR Sensor |
| Voltage | 220-240V ~ 50/60Hz |
| Protection Rating | IP65 (Dust and water jet proof) |
| Impact Resistance | IK07 (Protection against 2 joules of impact) |
| Color Temperature | Available in 4000K (Neutral White) and 6500K (Cool White) |
| Wattage | Available in 20W, 30W, 100W models |
| Sensor Type | PIR (Passive Infrared) Motion Sensor |
| Sensor Adjustments | Time delay, Lux (ambient light level), Sensitivity (motion detection range) |
Detailed specifications for specific models are provided in the original document.
Installation Guide
The installation process involves mounting the fixture, connecting the electrical wiring, and adjusting the sensor settings. The following describes the typical steps illustrated in the diagrams:
Mounting and Connections
- Mounting: The floodlight can be mounted on a wall (?) or a pole. A mounting bracket is typically included and should be securely fastened.
- Electrical Connections: Connect the wires according to standard electrical practices:
- Live (L) wire to the corresponding terminal.
- Neutral (N) wire to the corresponding terminal.
- Earth/Ground (?) wire to the grounding terminal.
- Sensor Adjustments: The integrated PIR sensor allows for customization:
- Time (⏱️): Adjust the duration the light stays on after motion is detected (e.g., 10 seconds to 5 minutes).
- Lux (☀️): Set the ambient light level at which the sensor becomes active (e.g., activate only in darkness or at dusk).
- Sensitivity (?): Adjust the detection range and sensitivity of the motion sensor.
Installation Steps
- Securely attach the mounting bracket to the desired surface (wall or pole).
- Open the connection compartment and connect the power supply wires (Live, Neutral, Earth) to the appropriate terminals. Ensure all connections are firm and secure.
- Adjust the sensor controls (Time, Lux, Sensitivity) to the desired settings.
- Mount the LED floodlight fixture onto the secured bracket and tighten any locking screws.
- Restore power and test the floodlight and its sensor functions.
Always refer to the specific diagrams in the original manual for precise placement and connection details.
Product Features
- Energy-efficient LED technology.
- Integrated PIR motion sensor for automatic activation.
- Adjustable sensor settings for customized operation.
- Durable construction with IP65 and IK07 ratings for outdoor resilience.
- Available in various wattages and color temperatures to suit different lighting needs.
