AIGOSTAR SSP-Eco-G Outdoor Solar LED Light
Product Parameters
- Model
- SSP-Eco-G
- Power
- 50W
- Solar panel
- DC5V/4W
- Battery specifications
- 32700 5000mAh
- Luminous flux
- 500lm
- CCT
- 3000K/4000K/6500K
- IP rating
- IP65
- Place of installation
- Walls, stumps
- Suggested installation height
- 3m
- Working temperature
- -30°C ~ 85°C
- Charging time
- 4-6h
- Working time
- 12h
- Weight
- 605g
- Control distance
- 8m
Controller Parameters
The remote control allows for various adjustments:
- ON/OFF: [Power Button] to turn the light on or off.
- Smart Mode: Provides steady illumination or automatic lighting based on time slots.
- CCT Adjustment: Select color temperature: Warm light (3000K), Warm white (4000K), or White light (6500K).
- Brightness Adjustment: Set light intensity to 25%, 50%, or 100%.
- Timer: Set the light to turn off automatically after 3 hours, 5 hours, 8 hours, or disable the timer.
Installation Instructions
Step 1: Prepare Mounting Location
Drill holes at the installation position, ensuring correct spacing for the bracket. Insert screw plugs into the holes and tap them into place. Mount the bracket using self-tapping screws, or secure it with a tie strap.
Step 2: Mount Solar Panel
Manually fix the solar panel onto the bracket using a screw. Adjust the panel's angle so its face is oriented 5-10 degrees from west to south, and at a specific angle to the horizontal (e.g., 30 degrees south, 45 degrees north). Tighten the screw securely.
Step 3: Mount Light Body
Drill holes at the installation position (typically 3 holes, spaced according to the universal bracket). Insert screw plugs and tap them into place. Install the universal bracket with self-tapping screws. Screw the light body counterclockwise into the universal bracket and fix it. Adjust the direction of the light source as needed.
Step 4: Connect and Activate
Connect the male and female plugs for power and tighten the waterproof nuts. After installation, check that all connections are secure. Press the switch located on the back of the power box. Remove the PVC spacer from the end of the remote control to enable its operation and control the light's working mode.
Precautions
- Keep installation tools out of reach of children.
- Batteries are included and are recyclable. Please dispose of them responsibly.
- Do not expose the product to fire, as it may explode.
- Do not connect to 110/220V AC power to prevent damage to the lamp body.
- Install the product on a flat and stable surface. Ensure the photovoltaic panel and light body are securely fixed to prevent injuries.
- To maintain optimal performance, clean dust or debris from the solar panel surface every 3-4 months.
- In autumn, winter, or during prolonged cloudy or rainy periods, the charging effect may be reduced, leading to shorter lighting times. This is a normal phenomenon.
- Avoid installing the light near air conditioners, heating objects, or high-voltage power systems.
- For first-time use, charge the device for more than 48 hours.
