ÅSKMULLER Table Lamp
Brand: IKEA
Important Safety Instructions
Warning: Read all instructions before use.
This product features a polarized plug, which has one blade wider than the other. This design is intended to reduce the risk of electric shock. The plug is designed to fit into a polarized outlet in only one orientation. If the plug does not insert fully, try reversing its orientation. If it still does not fit, consult a qualified electrician. Avoid using extension cords unless the plug can be fully inserted. Do not attempt to bypass the safety features of the polarized plug or modify it in any way.
Caution: To prevent electrical shock, ensure the wide blade of the plug aligns with the wide slot in the outlet and insert the plug completely.
FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Failure to follow assembly instructions may result in fire or electric shock.
Assembly Instructions
You will need a screwdriver ?.
If you encounter difficulties or have questions during assembly, please refer to the IKEA instructions or contact IKEA for assistance.
Step 1: Attach Retaining Ring
Insert and tighten the screw to secure the retaining ring to the lamp base.
[Diagram Description: A close-up view shows a screw being inserted and tightened into a threaded hole on a circular ring, with rotational arrows indicating the tightening motion.]
Step 2: Attach Glass Shade
Position the glass shade onto the lamp base and secure it using the provided screws. Tighten the screws with a screwdriver.
[Diagram Description: The lamp base is shown. A ring is being attached to the base with screws. A magnified view illustrates screws being inserted and tightened into the base using a screwdriver.]
Step 3: Secure Glass Shade
Gently screw the glass shade onto the threaded post on the lamp base. Turn clockwise until snug.
Caution: Do not overtighten.
[Diagram Description: The glass globe is being lowered onto the lamp base. Rotational arrows indicate that it should be screwed into place on the threaded post.]
Step 4: Insert Light Bulb
Insert a suitable light bulb ? into the socket located inside the glass shade. Turn the bulb clockwise to secure it.
[Diagram Description: A light bulb is shown being inserted into the socket inside the glass globe. Arrows indicate the direction of insertion and rotation to secure the bulb.]
Operation
Plug the lamp into a power outlet. Use the knob on the base to turn the lamp on and off.
[Diagram Description: The assembled lamp is illuminated, with lines radiating outwards to show light. A magnified view of the knob on the lamp base shows it being turned, with arrows indicating the on/off operation.]
