ÅSKMULLER Table Lamp

Important Safety Instructions

Please read these instructions carefully before use.

Electrical Safety

This product features a polarized plug, meaning one blade is wider than the other. This is a safety feature designed to reduce the risk of electric shock. The plug will only fit into a polarized outlet in one orientation. If the plug does not fit fully, reverse its orientation. If it still does not fit, contact a qualified electrician. Never use an extension cord unless the plug can be fully inserted. Do not attempt to bypass or alter the safety features of the polarized plug.

CAUTION: To prevent electrical shock, ensure the wide blade of the plug matches the wide slot in the outlet and is fully inserted.

General Warnings

WARNING: Deviations from the assembly instructions may result in a risk of fire or electric shock.

WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC Compliance Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

SAVE THESE INSTRUCTIONS

Assembly Instructions

Follow these steps to assemble your ÅSKMULLER table lamp.

Tools and Support: A diagram shows a person holding a screwdriver, indicating tools may be needed. Another diagram shows a person looking confused with furniture parts, then contacting IKEA, suggesting support is available if needed.

1. Step 1: Attach the Ring. Insert the threaded part of the ring into the designated opening on the lamp base. Secure it by screwing in the small screws from the underside of the base.
2. Step 2: Connect Lamp Body to Base. Place the lamp body onto the base. Align the holes and secure it with the provided screws.
3. Step 3: Attach Glass Shade. Carefully screw the glass shade onto the threaded neck of the lamp body.

   CAUTION! Do not overtighten.

4. Step 4: Insert Light Bulb. Screw the light bulb into the socket located inside the glass shade. Ensure it is properly seated.
5. Step 5: Operation. The lamp is now assembled. Use the dimmer switch on the side of the lamp base to turn it on/off and adjust the brightness.

Importer and Distributor Information

Mexico: IKEA Supply Mexico, S.A. de C.V., Calle Oriente 158, número 440, Piso 3, Local JD-01, Colonia Moctezuma, Segunda Sección, Alcaldía Venustiano Carranza, C.P. 15530, Ciudad de México. Tel. 55-8310-8310.

Read and follow all safety and operation instructions before using this product. For indoor use only. Consult electrical specifications on the product label.