ErGear Monitor Desk Mount Instruction Manual
Model: EGCM12
Thank you for choosing this Ergear product! At Ergear we strive to provide you with the best quality products and services in the industry. Should you have any issues, please don't hesitate to contact at support@ergear.com (US/CA/DE/UK/FR/IT/ES/AU)
Important Safety Information
- Check package contents against Supplied Parts and Hardware List to assure that all components were received undamaged. Do not use damaged or defective parts. If you require replacement parts, contact customer service at support@ergear.com
- Not all parts and hardware included will be used.
- Carefully read all instructions before attempting installation. If you do not understand the instructions or have any concerns or questions, please contact customer service at support@ergear.com
- This product may contain moving parts. Use with caution.
- Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. Ergear cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
Tools Needed (Not Included)
Phillips Screwdriver
Supplied Parts and Hardware
| Part | Description | Quantity |
|---|---|---|
| A1 | M4X12MM | 4PCS |
| A2 | M4X16MM | 4PCS |
| B | L5mm | 4PCS |
| C1 | M10 | 1PC |
| C2 | M10 | 1PC |
| C3 | M6X12MM | 1PC |
| D | M8X10MM | 2PCS |
| E | M6X8MM | 2PCS |
| F | M6X16MM | 1PC |
| F1 | Large Allen Key | 1PC |
| F2 | Small Allen Key | 1PC |
| a | 1PC | |
| b | 1PC | |
| c | 1PC |
Step 1: Install the Base
Option A: C-Clamp Installation
Diagram illustrates the C-clamp installation. Part D is inserted into the base of the pole. The pole assembly is then attached to the desk edge using the C-clamp mechanism, tightened with Allen key F1. Part C3 is also shown connecting components.
Desk Thickness Options for C-Clamp
Three diagrams show the C-clamp fitting different desk thicknesses: 2 11/64 in (55mm) to 3 5/32 in. (80mm); 1 3/16 in. (30mm) to 2 11/64 in. (55mm); and 3/8 in. (10mm) to 1 3/16 in. (30mm).
Option B: Grommet Installation
Diagram illustrates the grommet installation. The pole assembly is passed through a desk grommet hole. Parts 'b', 'C1', 'a', and 'C2' are used to secure the pole to the desk surface from underneath. The final image shows the pole firmly attached.
Step 2: Secure Monitor Connector to Pole Assembly
Diagram shows the monitor connector piece being slid onto the top of the pole assembly and secured with part 'C' and Allen key 'F1'.
Step 3: Attach VESA Plate to the Back of Monitor
Flat back monitor
Diagram shows VESA plate 'A1' being attached to a flat-back monitor using screws. The VESA mounting patterns are 100x100mm and 75x75mm.
Round back monitor
Diagram shows VESA plate 'B' being attached to a round-back monitor using screws 'A2'. The VESA mounting patterns are 100x100mm and 75x75mm.
VESA Plate Dimensions
100x100mm = 3 15/16 x 3 15/16 in.
75x75mm = 2 61/64 x 2 61/64 in.
Requires Phillips Screwdriver (Not included)
Step 4: Hang the Monitor to the Monitor Connector
Diagram shows the monitor, with the VESA plate attached, being lifted and hooked onto the monitor connector on the pole assembly. It is then secured with part 'F2'.
Step 5: Adjust the Tilt Angle and Manage the Cables
Diagrams illustrate adjusting the monitor's tilt angle using Allen key 'F1' on the tilt mechanism. It also shows the height adjustment feature and the use of two cable ties for managing monitor cables along the pole.
Thank you again
All of us at Ergear do appreciate your product purchase. We hope that you are as happy with your product as we are designing and manufacturing it for you. We strive to provide you with the best quality products and services in the industry. If you have any questions please don't hesitate to contact us at support@ergear.com (US/CA/DE/UK/FR/IT/ES/AU)
