Baby Trend Passport Cargo Stroller - Instruction Manual

Warranty Information

Baby Trend warrants its products against defects in workmanship for 1 year from the date of purchase. This warranty does not cover damage resulting from misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration, accident, or if the serial number has been altered or removed. Any property damage during installation is the sole responsibility of the end user.

For replacement parts, service, and repair, please contact Baby Trend Customer Service at 1 (800) 328-7363, Monday through Friday, between 8:00 a.m. and 4:30 p.m. PST. Return Authorizations are required. Visit http://babytrend.com/pages/limited-warranty for complete details.

Parts Identification

Before assembly, verify that you have all the necessary parts for this model. The following parts are typically included:

• Stroller and Canopy
• Child Tray
• Rear Axle Assembly
• Handle Cover
• Parent Tray with Mobile Phone Inset
• (2) Rear Wheels
• Rear Axle parts (2) caps and spare parts
• Rear Axle spare parts (2) caps, (2) pins, (4) washers

Note: Wheel style may vary. Infant car seats are sold separately.

Safety Warnings

General Safety:

• Always follow all instructions to ensure your child's safety. Keep these instructions for future reference.
• Failure to follow instructions could result in serious injury or death.
• Always use the safety harness and ensure children are properly positioned.
• Never leave children unattended.
• Be careful when folding and unfolding the stroller to prevent finger entrapment. Keep children away from the stroller during these operations.
• Ensure wheels are securely attached; a detached wheel can cause the stroller to tip over.
• Remove all accessories, mobile phones, diaper bags, or purses before folding to prevent damage to the stroller or items. Baby Trend is not liable for any damage caused by failure to remove items.

Usage Limitations:

• This stroller is designed for one child only. Using it with more than one child can cause imbalance and injury.
• Do not place hot liquids or items exceeding specified weight limits in trays or baskets.
• Maximum weight capacity for the storage basket is 5 lbs (2.27 kg).
• Maximum weight capacity for the child tray is 3 lbs (1.36 kg).
• Maximum weight capacity for the parent tray is 3 lbs (1.36 kg).
• The child occupant must not exceed 50 lbs (22.67 kg) or 42 inches (106.7 cm) in height.
• Total weight (child + accessories) should not exceed 60 lbs (27.21 kg).
• Never use the stroller on stairs or escalators.
• Never use the stroller with roller skates, in-line skates, skateboards, or bicycles.
• Never allow children to use the stroller as a toy.
• Never run or jog with this stroller.

Strangulation Hazard: A child can strangle in a loose safety harness. Never leave a child in the seat if the harness is loose or undone.

Assembly Instructions

Setting Up the Stroller Frame:

1. Release the fold latch by pulling it outward. Unfold the stroller frame by pulling upward on the stroller handle until the frame locks into place.

Rear Wheels Assembly: The rear wheels must be installed prior to use.

2. Remove the pin and one washer from each end of the rear axle.
3. Insert the rear wheel with auxiliary teeth first.
4. Pass the cross bar through the rear wheel and insert the second washer.
5. Place the pin horizontally into the axle bar hole, then rotate it into a vertical position to secure.
6. Align the tabs on the wheel cap with the holes on the wheel and push the cap firmly to close the axle assembly. Repeat for the other side.
7. Place the rear legs over the axle with wheels and apply downward pressure on both sides to ensure they lock into place.

Parent Tray and Mobile Phone Accommodation:

3. To insert the parent tray, locate the three open slots on the tray and face them toward the canopy. Align the parent tray tabs with the inner stroller tabs and press down firmly until both tabs click into position.
4. To attach the rear canopy to the parent tray, insert the center elastic band into the tray and hook it to the tray tab. Repeat for the side elastic bands. Secure the canopy sides with the bands underneath the frame, fastening each hook and strap onto the stroller frame.
5. To remove the parent tray, reverse step 4 by detaching the elastic bands. Locate the parent tray tabs under the stroller frame, press them inward, and lift the tray from the housing.

Mobile Phone Inset Tray: Place your mobile phone into the inset tray section, ensuring it rests against the angle point for proper viewing. Note: The positioner may not accommodate all phones. Do not use as a secure holder if the phone is loose or too large.

Child Tray Attachment:

5. To attach the child tray, push it downward into the connectors until it latches securely.
6. To access the child seat, push a release lever and lift the tray simultaneously. The tray will lift and rotate out of the way.
7. To remove the child tray, push to release both ends and lift the tray simultaneously.

Storage Basket Access: Lift the leg rest to access the storage basket from the front side. Ensure the storage basket front access is closed when not in use.

Check Straps: Ensure all straps with snap closures are attached correctly. Always secure straps as shown in the diagrams.

Rear Brakes:

7. Press down on the brake levers to engage the brakes. Lift up on the levers to release. Ensure the stroller is stationary before engaging brakes.

Securing the Child (5-Point Harness):

8. Adjust the shoulder straps to be level with or below the child's shoulders.
9. Place the safety harness around the child's waist and over the shoulders. Place the crotch strap between the child's legs. Insert the male ends of the shoulder/waist belts into the crotch strap buckle. Tighten all buckles for a proper fit.
10. To adjust harness height, pull the strap in a hoop shape through the slot for higher levels, or thread the clip back into the slot and pull for lower levels.
11. To release the harness, push the button on the center clasp.

Seatback Positioning:

9. To recline the seat, open the adjustment strap cover, loosen the strap to the desired position, and close the cover.
10. To place the seat in an upright position, open the cover, pull the strap to tighten, and close the cover. The upright position is for children at least 6 months old. Always readjust the harness when repositioning the seatback.

Infant Car Seat Attachment (Models CS01 EZ-Lift, CS02 EZ-Lift PLUS, CS03 EZ-Lift PRO):

10. Align the car seat module with the stroller's inner frame connectors. Rest the rear of the car seat against the angle point of the tray. Latch the module into the stroller frame and press firmly until it clicks. Always ensure the car seat is properly connected and locked by lifting the car seat handle before each use.

Removing the Car Seat:

Set the car seat handle to the carry position. Squeeze the release handle located at the top-rear of the car seat and lift it away from the stroller.

Stroller Handle Cover:

To attach, wrap the cover around the handle and zip closed. To remove, unzip. The cover can be stored in the storage basket.

Storage Pouch Operation:

12. Flip out the storage pouch by squeezing the adjustment buckle and pulling the strap down. Use the toggle to loosen and tighten the pouch.
13. To compress and close the pouch, tighten it with the toggle. Squeeze the tabs and pull the adjustment buckle up to close the entire pouch. Always close and secure the pouch when not in use.

Folding the Stroller:

13. Locate the strap in the seat pocket. Pull the strap upward firmly to unlock the frame.
14. Holding the strap, lift the stroller frame until it fully closes. Fold the stroller to its collapsed position (may require hand assistance) before securing with the fold latch.
15. Tuck the pull strap back into the seat fabric. You may remove the tray for a more compact fold.

Unfolding the Stroller:

14. Unlock the fold latch and unfold the stroller frame by pulling upward on the stroller handle until it locks. Refer to child tray instructions if needed for tray removal or adjustment.

Securing the Seat Fabric:

15. Feed the rear recline clip and seat fabric through the appropriate hook and loop slots on the stroller frame. Ensure safety straps underneath the rear seat are secured through the appropriate slots.

Front and Rear Wheel Release:

16. Front Wheel: Locate the release pin on the wheel hub. Push the pin and pull the wheel out. To reinstall, insert the wheel onto the pin and press firmly. Note: The release pin faces inward if the wheel is positioned as shown.
17. Rear Wheel: Press the release pin and pull the wheel out.

Care and Maintenance

Seat Pad: To clean, use mild household soap or detergent with warm water on a sponge or clean cloth.

Other: Regularly check your stroller for loose screws, worn parts, torn material, or stitching. Replace or repair parts as needed.

Customer Service: For assistance, contact Baby Trend Customer Service at 1 (800) 328-7363, Monday-Friday, 8:00 a.m. - 4:30 p.m. PST. Return Authorizations are required for returns.