Sofa Assembly Instructions
Important Information
Dear Customer,
After receiving the product, please check all the accessory codes and quantities according to the instruction manual. If there is any omission, please contact Latitude Run in time. We will provide solutions for you.
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
Thanks for your purchase. Before assembly, please follow the instructions to check if all the spare parts and screws are intact.
- Considering the size and weight of the sofa, we recommend two adults to assemble the sofa, on a carpeted or padded area, in the room that it is intended for. Approximate assembly time: 60 minutes.
- Keep all components and packaging out of reach of children or animals to avoid risk of choking or suffocation.
- Please do not throw away any of the packaging or the instruction until you have checked all the components and hardware and the furniture is fully assembled.
- Please ensure that the packaging is disposed of in a safe and environmentally friendly way.
Cushion Care
Your cushions come vacuum packed and sealed for shipping. To restore the cushion's original shape, follow these steps:
- Open the vacuum bag carefully.
- Press and tap with both hands from the side to fully inhale air.
- Press and tap with both hands from the front to fully inflate.
- Carefully smooth out each section until the surface is even.
After packing up, place them in somewhere dry and ventilated. After about 72-96 hours, it can be restored to the best use condition.
Parts Identification
Hardware Parts
- 1. Bolt (M6x35): x22
- 2. Bolt (M6x55): x8
- 3. Bolt (M6x60): x14
- 4. Washer: x66
- 5. Nut: x22
- 6. Allen Key: x1
- 7. Spanner: x1
Main Structure Accessories
- A. Right Armrest: x1
- B. Left Armrest: x1
- C. Seat: x3
- D. Side panel: x1
- E. Side panel: x1
- F. Side panel: x1
- G. Side panel: x1
- J. Back rest: x1
- K. Back rest: x1
- L. Back rest: x1
- M. Seat cushion cover: x3
- N. Seat cushion cover: x3
- S. Back cushion cover: x3
- T. Back cushion cover: x3
- U. Wooden footpads: x4
- V. Wooden footpads: x4
Assembly Instructions
General Instruction
Please DO NOT tighten the screws at this step yet. Wait to tighten all the screws until the product is fully installed.
STEP 1
Place the Right Armrest (A) on the ground before assembly. Do not tighten screws yet.
STEP 2
Attach the Right Armrest (A) to the Seat (C) using Bolts (3), Washers (4), and Nuts (5). Do not tighten screws yet.
STEP 3
Attach the Side panel (E) to the Seat (C) using Bolts (1), Washers (4), and Nuts (5). Do not tighten screws yet.
STEP 4
Attach the Side panel (E) to the Seat (C) using Bolts (2), Washers (4), and Nuts (5). Do not tighten screws yet.
STEP 5
Attach the Right Armrest (A) to the Side panel (E) using Bolts (3), Washers (4), and Nuts (5). Do not tighten screws yet.
STEP 6
Attach the Side panel (F) to the Seat (C) using Bolts (1) and Washers (4). Do not tighten screws yet.
STEP 7
Attach the Back rest (K) to the Side panel (F) using Bolts (3), Washers (4), and Nuts (4). Do not tighten screws yet.
STEP 8
Place the Left Armrest (B) on the ground before assembly. Do not tighten screws yet.
STEP 9
Attach the Left Armrest (B) to the Seat (C) using Bolts (3), Washers (4), and Nuts (5). Do not tighten screws yet.
STEP 10
Attach the Left Armrest (B) to the Seat (C) using Bolts (1), Washers (4), and Nuts (5). Do not tighten screws yet.
STEP 11
Attach the Side panel (G) to the Left Armrest (B) using Bolts (2), Washers (4), and Nuts (4). Do not tighten screws yet.
STEP 12
Attach the Side panel (G) to the Seat (C) using Bolts (3), Washers (4), and Nuts (5). Do not tighten screws yet.
STEP 13
Connect the assembled sections. Do not tighten screws yet.
STEP 14
Attach the Wooden footpads (V) to the base using Bolts (2), Washers (4), and Nuts (5). Do not tighten screws yet.
STEP 15
Attach the Wooden footpads (U) to the base using Bolts (1) and Washers (4). Do not tighten screws yet.
STEP 16
Place the Seat cushions (M, N) and Back cushions (S, T) onto the sofa frame. The assembly is now complete. Tighten all screws.