Installation Steps
Installation Step 1
Open the carton, remove the compression bag, and cut the compression bag. Be aware of sharp objects that could scratch the interior of the sofa. Wait for the sponge to bounce back.
Visual description: The process begins with opening a carton. A compressed sofa component is shown inside a compression bag. A pair of scissors [✂️] is depicted cutting this bag. An arrow [▶️] indicates the action of cutting. Following this, individual components such as the backrest (E), seat cushion (F), handrail (G), and throw pillow (J) are displayed, suggesting they will expand after being released from compression.
Installation Step 2
Press the support frame (H) from the top down into the designated holes above the seat frames (A/B and C) to ensure they are fully seated at the bottom.
Visual description: Two diagrams illustrate the insertion of the support frame (H). In the first diagram, frame H is shown being pressed downwards into holes located on a base structure labeled A(B). In the second diagram, frame H is similarly pressed into holes on a base structure labeled C. Downward arrows [▶️] indicate the direction of insertion for the support frame.
Installation Step 3 (Part 1)
Flip all the seat frames (A, B, C, D) to their bottom side. Install all the round feet (I) into the corresponding holes. Note: The sofa legs marked by red circles on the left and right seat frames (A & B) indicate the holes for the Fixed brackets (H). Therefore, the Fixed brackets (H) need to be installed in advance before attaching the feet.
Visual description: The four seat frames (A, B, C, D) are shown upside down. Round feet (I) are being inserted into pre-drilled holes. A close-up view displays a gasket (K) and a sofa leg (I), highlighting their connection points. Specific areas on seat frames A and B are circled in red, indicating attachment points for the Fixed brackets (H).
Installation Step 3 (Part 2)
Insert the armrest (G) and backrest (E) into the support frame from top to bottom.
Visual description: Two diagrams show the armrest (G) and backrest (E) components being inserted downwards into the assembled base structure. The first diagram shows insertion into a structure labeled A(B), and the second into a structure labeled C. Downward arrows [▶️] denote the direction of insertion.
Installation Step 4
Fasten the mouth-facing-down plug-in component to the entrance-facing-up plug-in component, from top to bottom, to complete the combination of seats. Finally, tear off the sticky cloth from the seats.
Visual description: The connection of seat sections is demonstrated. A close-up view shows two interlocking plug-in parts, with an arrow [▶️] indicating how they fit together from top to bottom. Another close-up shows a hand peeling off a protective sticky cloth from the surface of a seat.
Installation Step 5
Finally, place the seat cushions (F) and throw pillows (J) onto the sofa. This product can be arbitrarily combined with the number of products purchased by users.
Visual description: Three different perspectives of the fully assembled sofa are shown. These views illustrate various arrangements of seat cushions (F) and throw pillows (J) placed on different seat sections (labeled A, B, C) and the footrest (D), demonstrating flexible configuration options.
Models: avwi1282, W114761485, Latitude Run AVWI1282 Chenille Upholstered Modular Sectional Sofa Cloud Couch, Latitude Run AVWI1282, Chenille Upholstered Modular Sectional Sofa Cloud Couch, Upholstered Modular Sectional Sofa Cloud Couch, Modular Sectional Sofa Cloud Couch, Sectional Sofa Cloud Couch, Sofa Cloud Couch, Cloud Couch, Couch
