Assembly Instructions
Parts List
- A: Back Panel x1
- B: Side Panel x2
- C: Front Door x1
- D: Top Panel x1
- E: Shelf x4
- F: Bottom Panel x1
- G: Back Beam x1
- H: Front Beam x1
- Ix4
- Jx1
- Kx1
- Lx16
- Nx2
- Mx6
- Ox1
- Px1
Assembly Steps
- Step 1: Attach components as shown in the diagram.
- Step 2: Assemble the main frame.
- Step 3: Secure panels using provided hardware.
- Step 4: Attach the door.
- Step 5: Install the bottom panel.
- Step 6: Attach the back beam.
- Step 7: Install the shelves.
- Step 8: Secure the unit with additional hardware.
- Step 9: Final assembly of the locker structure.
- Step 10: Complete the assembly, ensuring all parts are tightened.
Care Instructions
Ensure all parts are present before assembling. Assemble on a soft surface like a carpet. Wipe clean with a soft dry or damp cloth. Keep away from water and direct sunlight. Suitable for indoor and domestic use. Check and tighten all parts regularly.
Warnings
- Do not stand or sit on the unit.
- Do not lean on the product.
- Do not drag the product.
- Use only on a flat surface.
- Do not use until all screws, bolts, and knobs are firmly secured.
- This product contains small parts and sharp points; keep away from children and babies.
- Adult assembly is required.
- Failure to follow these warnings could result in serious injury.
- Maximum loading weight: 10kg per shelf.
- It is strongly recommended that this product is permanently fixed to the wall. Seek professional advice if unsure about the appropriate fixing device.
- Regularly check that anchors are securely maintained.
- Caution: For safety when attaching anchor fixings, check for electrical wires or plumbing inside the wall before drilling any holes. If unsure, seek professional advice from a qualified tradesperson.
