BODY CAMERA

1. Basic Introduction

Name: Body Camera

Model: body camera

Rated: DC 5V = 1A

Battery Rated Voltage: 3.8 V DC

Battery Capacity: 3000mAh 8.15Wh

Manufacture: Shenzhen LvYou You Technology Co., Ltd

Address: 401, Building F, Zhenbao Industrial Zone, South Side of Heping Road, Jinglong Community, Longhua Street, Longhua District, Shenzhen

[EC REP] Apex CE Specialists GmbH

Address: Grafenberger Allee 277, 40237 Düsseldorf, DE

TEL: 49 21312066043

E-mail: oylily88@gmail.com

[UK REP] APEX CE SPECIALISTS LIMITED

Address: 6f East Union Street, Manchester, England, M16 9AE

TEL: 441616371080

E-mail: oylily88@gmail.com

2. Safety Warnings

Important safety information for BOBLOV Body Camera

⚠️ WARNING: Failure to follow these safety instructions could result in fire, injury, or damage to camera or other property. Read all the safety information below before using camera.

Handling: Handle Camera with care. Avoid exposing the device to extreme temperatures or moisture. Doing so may damage the device and void the warranty. It is made of battery, and plastic and has sensitive electronic components inside. Camera or its battery can be damaged if burned, punctured, or crushed, or if it comes in contact with liquid. If you suspect damage to camera or the battery, discontinue use of camera, as it may cause overheating or injury. When used as a driving recorder, please do not leave the device in an outdoor car for a long time, as high temperatures may cause the camera battery to expand or explode.

Battery: Avoid exposing the device to extreme temperatures or moisture. A camera battery should only be repaired by a trained technician to avoid battery damage, which could cause overheating, fire, or injury. Batteries should be recycled or disposed of separately from household waste and according to local environmental laws and guidelines.

Charging: To charge camera, do any of the following: Charge the camera battery using the charging cable (included) and an 5V 1A power adapter. Connect camera and your computer with a cable. Please use a power adapter that meets applicable standards and is CCC certified to charge your camera. Using damaged cables or chargers, or charging when moisture is present, can cause fire, electric shock, injury, or damage to camera or other property. When you use the charging cable (included) or a charger to charge camera, make sure its USB connector is fully inserted into a compatible power adapter before you plug the adapter into a power outlet. It's important to keep camera, the charging cable, the power adapter, in a well-ventilated area when in use or charging.

Prolonged heat exposure: Please use common sense to avoid situations where your skin is in contact with a device, its power adapter, or a wireless charger when it's operating or connected to a power source for long periods of time. For example, don't sleep on a device, power adapter, or wireless charger, or place them under a blanket, pillow, or your body, when it's connected to a power source. Keep your body camera, the power adapter, and any wireless charger in a well-ventilated area when in use or charging. Take special care if you have a physical condition that affects your ability to detect heat against the body.

Choking hazard: Some camera accessories may present a choking hazard to small children. Keep these accessories away from small children.

Caution: This device records video and audio continuously. Please ensure you comply with all applicable laws regarding the use of recording devices. Regularly check and charge the battery. A low battery may result in incomplete recordings. Handle the device with care. Dropping or striking the device may cause damage or data loss. Do not use the device for illegal purposes. Misuse of the device may result in legal action. Do not cover or obstruct the camera lens or microphone. This may impair the recording quality and functionality of the device.

3. DOC Documents

EU/UK DECLARATION OF CONFORMITY

This declaration of conformity is issued under the sole responsibility of the manufacturer.

Manufacturer: Shenzhen LvYou You Technology Co., Ltd

Address: 401, Building F, Zhenbao Industrial Zone, South Side of Heping Road, Jinglong Community, Longhua Street, Longhua District, Shenzhen

EU Representative: Apex CE Specialists GmbH

Address: Grafenberger Allee 277, 40237 Düsseldorf, DE

TEL: 49 21312066043

E-mail: oylily88@gmail.com

UK Representative: APEX CE SPECIALISTS LIMITED

Address: 6f East Union Street, Manchester, England, M16 9AE

TEL: 441616371080

E-mail: oylily88@gmail.com

Product: Body Camera

Model: body camera

We declare that the product described above, to which this declaration of conformity refers to, is in conformity with the relevant Union harmonization legislation:

EMC Directive 2014/30/EU

LVD Directive 2014/35/EU

ROHS2.0 Directive 2011/65/EU

through the technical standards/specifications specify below:

EN 55032:2015+A11:2020+A1:2020; EN 55035:2017+A11:2020;

EN IEC 61000-3-2:2019+A1:2021;

EN 61000-3-3:2013+A1:2019+A2:2021

EN IEC 62368-1:2020+A11:2020; IEC 62321-3-1:2013;

IEC 62321-4:2013+AMD1:2017; IEC 62321-5:2013;

IEC 62321-6:2015;IEC 62321-7-1:2015;

IEC 62321-7-2:2017; IEC 62321-8:2017

Signed for and on behalf of

Signature: [Signature Placeholder]

Name: Wei zhuo xing

Position: QA Director

Place and date of issue: Shenzhen, July 19, 2024

4. Caution

1. Do not expose camera or battery being placed in high/low temperature environment. If battery leaks or bulges, stop to use. Risk of explosion if battery is placed by an incorrect type.
2. Never replace the battery on your own. It may cause the damage or explosion. Please contact us if the battery have any problem.
3. Do not put the LCD display or lens under the sunshine.
4. Never dismantle, crush, or pierce the product, or allow the product to short-circuit. Please persuade for professional assistance if the product doesn't work properly.
5. Always full charge the battery before use. It is advised to charge at least 4 hours.
6. If you do not use the machine, please charge the machine every once in a while, otherwise, the battery of the machine will be damaged slowly.

5. Quick Start

1. LCD Introduction

A diagram illustrating the camera's LCD screen interface. The screen displays various status indicators and settings:

• 1. Battery Level: Shows the current battery charge.
• 2. Video Resolution: Indicates the selected video resolution (e.g., 1920x1080).
• 3. Frame per Second: Displays the frame rate (e.g., 30p).
• 4. Coding Format: Shows the video compression format (e.g., H.265/HECV).
• 5. Device&Officer ID: Displays the assigned device or officer identification.
• 6. Date and Time: Shows the current date and time.
• 7. Recording Indicator: A visual cue indicating if recording is active.
• 8. Recording time: Displays the duration of the current recording.
• 9. Remaning recording time: Shows the estimated remaining recording time.
• 10. Total memory: Indicates the total storage capacity.
• 11. Available memory: Shows the remaining free storage space.

2. Top Screen Introduction

A diagram of the camera's top screen display showing icons for battery, storage, GPS, and the current time.

• 1. Battery: Icon indicating battery status.
• 2. Storage Icon: Blocks decrease after recording.
• 3. GPS Icon: Indicates GPS signal status.
• 4. Recording time: Displays the current recording duration.

3. Always full charge the battery before use. It is advised to charge at least 6 hours by standard USB cable and charge (Power off states).

4. Quick Start to Get camera for working

Images of the body camera with labels indicating button functions:

• Front/Top:
• Long press to turn on/off night vision in standby mode, short press for turn on/off the audio.
• Short press the record button to start/stop recording.
• In video modes, long press the record button to lock all buttons. Long press again to unlock the buttons.
• Short press for photo shooting.
• Long press to turn on/off camera, short press for return back.
• Back (LCD Screen):
• [OK] button for confirm.
• Short press for menu, long press for zoom in.
• Short press for playback, long press for zoom out.

6. Product Button Function Introduction

A diagram showing the camera from different angles with numbered indicators pointing to buttons and ports, followed by a table detailing their functions.

Diagrams:

• 1. Top LCD screen
• 2. Record Button
• 3. Photo Button
• 4. USB Port
• 5. Playback/Zoom out
• 6. OK Button
• 7. Menu/Zoom in
• 8. Audio/Night Vision
• 9. Power Button

Button Functions:

File Operations:

• Delete the files: In standby mode, press "<0xE2><0x96><0xB6>||" button to enter the playback mode, then long press "OK" button again for deleting the files on device. Short press "FN" to select video, photo, audio playback.
• If you set password, the default Password: 000000.
• Press “Power” button to exit to previous interface when menu setting or playing back files.

7. Indicator Introduction

A table describing the status and charging indicator LEDs.

8. File Transfer/Connecting Computer

Connect to the computer by the USB cable attached. Then enter USB disk mode. If "Password Protection" is turned on in the menu, you need to input the password you set first (the default password is 000000) to review or delete files in the computer.

An image shows the body camera connected via USB cable to a laptop. Text indicates "The camera will show USB connecting when read successfully." and labels the "USB port".

Below is a screenshot of a file explorer window displaying file organization:

• Name: DCIM, Date/Time: 2022/5/14 11:36, Type: Folder, Storage: Video and Photo file
• Name: LOG, Date/Time: 2022/5/14 11:36, Type: Folder, Storage: (Empty)
• Name: ID, Date/Time: 2022/5/14 11:37, Type: TXT, Storage: Device Operating Log (It may have some log remain, please don't worry, it is our QC tested log)

Police ID and Device ID Setting

9. Date and Time Setting

GPS Version

1. Step 1: Enter Menu, find option of "TimeZone", set it to your local time zone, and save. Eg: If you are in the US, set the time zone to "GMT-08:00" (According to your local time zone).

A settings screen is displayed showing:

• TimeZone: -8
• Language: English
• Screen Saver: 5Mins
• LCD Brightness: High

2. Step 2: Enter Menu, turn on the "Global Positioning" (the top small icon will be yellow flash, the back of screen GPS icon flashes), then go outside to locate the GPS. Once the GPS is located successfully, the top small icon will be yellow still. The back screen will show your coordinate position. Then the camera date & time will sync to the local correct time. (Please use the GPS in an open place. Or the signal will be hard to locate.)

A diagram of the top screen display shows time and GPS status. Another diagram shows the LCD screen with video resolution, aspect ratio, frame rate, coding format, file ID, date/time, and memory usage.

Note: If you don't use GPS function, then you can enter menu to set the time directly. But if you turn on the GPS function, need to set your local correct time zone first.

10. CarDV Mode

CarDV Mode means the camera will start recording auto as long as you power the machine. If you want the camera to be a dash cam, on standby mode, enter the setting menu to set the "CarDV Mode" to "On" and save the change.

Note please: When you activate the dash camera mode, the camera will start to record auto after you connect the camera with your car in ignition status.

A settings screen is displayed showing:

• CarDV Mode: OFF
• Loop Recording: ON
• Split Time: 10Mins
• Slideshow: OFF

Install the Car Suction Bracket and Camera

F2 body camera includes a Car Suction Cup Bracket to install the body camera on the car windshield.

This suction cup only supports clean and smooth glass material. If the surface is not smooth enough or frosted glass, it cannot suck firmly.

Attach Car Bracket to F2 Camera

Three numbered images illustrate the process of attaching the car bracket to the camera and mounting it on a windshield.

11. You May Concern

1. Password

The default is password off. If you need this function, turn it on in the menu. The default password is 000000. If you forget your new password, enter NJMD07 to reset the camera password.

2. Return Button

Press "Power" button to exit to previous interface when menu setting or playing back files.

3. Audio Button

In standby mode, short press "FN" to turn on/off the Audio.

4. Loop Recording/Mark Important Files

When the loop record is on, the camera will cover previous files to save new file when the space is full. If you don't want certain files to be covered, you can press "FN" button when recording to mark files. The screen will show a star ⭐ as marked important file. Then these files won't be covered.

A diagram shows the LCD screen with a video playing and a star icon indicating a marked file.

5. Video Fragment

The default is 10 mins per video clip. If you want longer or shorter fragments, please go to menu "Split time" setting.

6. Playback

In standby mode, short press "<0xE2><0x96><0xB6>||" button to enter playback. Short press "FN" to select video, photo, audio playback.

7. Delete file

• a) The camera supports deleting files by connecting the camera with a computer.
• b) You can also delete files directly on the camera.
• Step 1: In standby mode, short press "<0xE2><0x96><0xB6>||" button to enter playback, and select one.
• Step 2: Long press "OK" button to Delete the files.
• Step 3: If you don't want to delete, press "Power" button to return previous.

8. Battery&Charging

The battery is 3000mAh, supporting 10 hours recording in 1080P and 4-6 hours charging. Please turn off the camera for charging.

Note: Power off for charging and please charge camera fully after camera is left without working for long time.

Two images show the camera connected to a charger, with labels "Still Blue: Charging Status" and "Still White: Camera is fully charged".

12. GPS Function

1. Active the GPS function

Enter Menu, turn on the "Global Positioning" (the top small icon will be yellow flash, the back of screen GPS icon flashes), then go outside to locate the GPS. Once the GPS is located successfully, the top small icon will be yellow still. The back screen will show your coordinate position. (Please use the GPS in an open place. Or the signal will be hard to locate.)

A settings screen is displayed with options including "Global Positioning: ON".

A diagram of the top screen display shows time and GPS status.

2. GPS Player download address (for both Windows and Mac)

https://www.dvplayer.net/

3. GPS player installation steps

1. Open the above URL, click the "Updates".
2. Click "Get New Version" to download DVPlayer.

Screenshots show the DVPlayer website interface and download process, including version update notes.

3. After the installation is complete, the DVPlayer icon will appear on the desktop.

4. Playback GPS Videos on Computer

1. Fill in the registration code here (the registration code is included in the camera box).

Screenshots of the DVPlayer software interface are shown, illustrating video playback with a map overlay and fields for registration code, speed, coordinates, etc.

5. DVPlayer Interface Indication

A detailed diagram of the DVPlayer interface with numbered labels pointing to various controls and information displays:

• 1. Progress bar
• 2. Restart
• 3. Fast rewind
• 4. Play/Pause
• 5. Fast forward
• 6. Back to the end
• 7. Export the GPS date
• 8. Screenshot
• 9. Auto Play Next
• 10. Zoom
• 11. Volume
• 12. Speed
• 13. Latitude and longitude
• 14. Maximum/average speed
• 15. G SENSOR data
• 16. Map track
• 17. Time & Camera ID & Latitude and Longitude

A warm reminder: When you need to change the computer to view the video track, please delete the registration code on the original computer and log in on the new computer.

Steps are shown with a screenshot of the DVPlayer menu option "Delete registration".

13. Reset

An image of the side of the body camera shows the reset port.

Use a small needle or paper clip to stick the camera. Or long press power button with 18S to reset.

14. Specification

15. Troubleshooting

Q: Why are none of the buttons working on my camera?

A: This may be because the video button was held down, which locks all buttons. To unlock, simply long-press the video button again. If this doesn't work, try resetting the camera.

Q: The camera couldn't power on, stop working/white screen/freeze?

A: Connect the charger and cable to charge the device with 4 hours; Long press power button about 18s to reset the camera.

Q: Forget the password?

A: The default is password off, and if you need this function, turn it on in the menu, the default password is 000000, and if you forget your new password, enter NJMD07 to reset the camera password.

Q: A video or audio can not be played? Or no sound for videos?

A: Please check the menu and turn on the "Video Mute" function. Turn to the loudest volume of the Camera to check whether the sound could playback normally with the camera itself. It is recommended to playback videos/audio on the VLC media player or Quick Time Player.

Q: Why the screen turns off automatically?

A: The camera enters the LCD Auto Off mode in default without 5 minutes operation. If you want the display to be always on, please enter the menu to set LCD Auto Off option to Off. LCD Auto Off option can be set to off/1min/3min/5min.

Q: Why does the camera shut off auto?

A: Please check whether the Auto Power Off option in the menu is set to auto power off in 15 mins without any operation. If you want the camera to stay power-on state, please enter the menu to set Auto Power Off to Off. Auto Power Off mode can be set to off/5min/10min/15min.

Q: The camera is stop recording after a coupon of hours?

A: To make sure the camera works well, fully charged 4-6 hours before recording, then check if the SD card is full memory. We advise to open the loop recording in the menu, then the recording will cover previous file to save more space.