Signature Design by Ashley B106-59 Bunk Bed Assembly Instructions

Model Number: B106-59

Important Safety Warnings

Always use proper tools and follow assembly steps in order.
Check all packing materials for small parts. Contact the retailer for missing parts; do not use substitute parts.
Periodically check that all connectors (bolts, screws, etc.) are tight.
Keep these instructions for future reference.
When assembling products with electrical cords, ensure the cord is unplugged before assembly and avoid twisting it.
Do not stand on lower shelves to assemble upper shelves; use a step ladder.
Do not stand on tables, as they are not designed to support a person's weight.
Assembly may require two or more people; do not attempt alone to avoid injury.
Bunk Bed Specific Warnings:
Do not allow children under six years of age to use the upper bunk.
Always use guardrails on both long sides of the upper bunk.
Prohibit horseplay on or under beds.
Prohibit more than one person on the upper bunk.
Use the ladder for entering or leaving the upper bunk.
If the bunk bed is placed next to a wall, position the full-length guardrail against the wall to prevent entrapment.
Follow information on warnings appearing on the bunk bed structure and carton; do not remove warning labels.
Always use the recommended size mattress or mattress support to prevent entrapment or falls.
The surface of the mattress must be at least five inches (127mm) below the upper edge of the guardrails.
Periodically check that guardrails, ladder, and other components are in proper position, free from damage, and that all connectors are tight.
Do not use substitute parts; contact the manufacturer or dealer for replacement parts.
Use of a night light may provide added safety for a child using the upper bunk.
The use of water or flotation mattresses is prohibited.
Strangulation Hazard: Never attach or hang items to any part of the bunk bed that are not designed for use with the bed (e.g., hooks, belts, jump ropes).
Prohibit jumping on beds.

Parts List

A: Top bunk frame (x1) - Main side structure for the top bunk.
B: Bottom bunk frame (x1) - Main side structure for the bottom bunk.
C: Top bunk long side rail (x2) - Used for the sides of the top bunk.
D: Top bunk long side rail (x2) - Used for the sides of the top bunk.
E: Bottom bunk short side rail (x2) - Used for the sides of the bottom bunk.
F: Top bunk guardrail (x2) - Safety rails for the top bunk.
G: Ladder (x1) - For accessing the top bunk.
H: Bed support/slat (x4) - Horizontal supports for the mattress base.
J: Bed support/slat (x4) - Horizontal supports for the mattress base.
K: Bed support/slat (x4) - Horizontal supports for the mattress base.
L: Bed support/slat (x4) - Horizontal supports for the mattress base.
M: 5/16" x 20mm bolt (x8) - Fasteners.
N: 1/4" x 20mm bolt (x35) - Fasteners.
P: 1/4" x 50mm bolt (x2) - Fasteners.
Q: 1/4" x 65mm bolt (x4) - Fasteners.
R: Allen wrench (x1) - Tool for tightening bolts.
S: 5/16" bolt (x1) - Fastener.

Assembly Instructions

Step 1: Prepare Frames

Attach the main bunk bed frames (A, B) to the long side rails (C, D) and short side rails (E) using 1/4" x 20mm bolts (N). Ensure all bolts are started but not tightened. This forms the basic structure of the top and bottom bunks.

Step 2: Attach Top Bunk Supports

Attach two bed support beams (H) and two bed support beams (J) to the inside of the top bunk side rails (C, D) using 1/4" x 20mm bolts (N). These will support the mattress for the top bunk.

Step 3: Attach Bottom Bunk Supports

Attach two bed support beams (K) and two bed support beams (L) to the inside of the bottom bunk side rails (E) using 1/4" x 20mm bolts (N). These will support the mattress for the bottom bunk.

Step 4: Attach Guardrails and Ladder

Secure the top bunk guardrails (F) to the top bunk side rails (C, D) using 1/4" x 20mm bolts (N). Attach the ladder (G) to the frame using 1/4" x 20mm bolts (N). Ensure the ladder is oriented correctly for access.

Step 5: Secure All Supports and Components

Fully tighten all bolts securing the bed support beams (H, J, K, L) to the frame and side rails. Use the remaining 1/4" x 20mm bolts (N), 1/4" x 50mm bolts (P), 1/4" x 65mm bolts (Q), 5/16" x 20mm bolts (M), and 5/16" bolt (S). Use the Allen wrench (R) for tightening.

Step 6: Attach Remaining Guardrails

Attach the remaining top bunk guardrails (F) to the opposite side of the top bunk using 1/4" x 20mm bolts (N).

Mattress Size Requirements

The only acceptable size mattress to be used with this bed is as follows:

Width: Between 37-1/2 inches (952mm) and 38-1/2 inches (978mm) (Twin size).
Length: Between 74 inches (1880mm) and 75 inches (1905mm).
Thickness: No thicker than 7 inches (178mm).

	Signature Design by Ashley B328-59 Bunk Bed Assembly Instructions Comprehensive assembly instructions and safety guidelines for the Signature Design by Ashley B328-59 bunk bed. This document provides a detailed parts list, step-by-step assembly procedures, and crucial safety information for proper and safe use of the bunk bed.
	Signature Design by Ashley B733-50 Bunk Bed Assembly Instructions Comprehensive assembly instructions and safety guidelines for the Signature Design by Ashley B733-50 bunk bed. Includes a detailed parts list and step-by-step assembly guidance for various configurations.
	Signature Design by Ashley B075-159,259 Bunk Bed Assembly Instructions Comprehensive assembly instructions for the Signature Design by Ashley B075-159,259 bunk bed, including safety warnings, parts list, and step-by-step guidance for safe and proper setup.
	Signature Design by Ashley B075-160 Loft Bed Assembly Instructions Comprehensive assembly instructions for the Signature Design by Ashley B075-160 Loft Bed, including safety warnings, parts list, and step-by-step guidance. Ensure safe and correct assembly of your bunk bed.
	Trinell B446 Loft Bed Collection by Signature Design by Ashley Discover the Trinell B446 loft bed collection by Signature Design by Ashley, featuring a rustic plank finish, integrated storage steps, smooth drawers, and a built-in fort. Perfect for creating a charming and functional bedroom space with a reclaimed barn wood aesthetic.
	Signature Design by Ashley Bunk Bed Assembly Instructions Comprehensive assembly instructions and safety warnings for the Signature Design by Ashley Bunk Bed, model B733-58P, 58R. Includes parts list, assembly steps, and important safety guidelines for proper use.
	Signature Design by Ashley Bunk Bed Assembly Instructions Comprehensive assembly guide and safety warnings for Signature Design by Ashley bunk beds, models B082-156F, 156P, 156S, 256F, 256P, 256S. Includes parts list and step-by-step instructions.
	Signature Design by Ashley Socalle Bedroom Furniture Collection Discover the 'Socalle' bedroom furniture collection by Signature Design by Ashley. This collection features a natural finish with replicated oak grain, contemporary dark pewter handles, and metal legs, offering durable and stylish pieces including beds, dressers, chests, and nightstands.