Pixsys Signal Converters Overview
Programmable by RFID /NFC. No wiring required!
DIN B head / DIN rail converter
Programmable input
Galvanical isolation
DIN rail version including customized linearization
Programming Tools
Programming device 2000.35.012
App "My Pixsys" for Android
The Pixsys ecosystem allows for easy configuration and monitoring of signal converters. The programming device 2000.35.012 facilitates setup, while the "My Pixsys" app, available for Android, enables wireless configuration via NFC.
Main Features
2000.35.010 | 2000.35.015 | 2000.35.016 | 2000.35.017 | |
Box | 23 mm, Ø 45 mm | 23 mm, Ø 45 mm | DIN43880 1 module - 18 x 90 x 64 | |
Current output | 4..20 mA loop power (2 wires), operating range 6-32 V DC | |||
Connection | Screw pins | |||
Mounting | DIN/B head | DIN/B head | Din-Rail mounted | |
Operating temperature | -40+85 °C, Humidity 30..90 RH% | |||
Material | Nylon (PA66) | Nylon (PA66) | Box: polycarbonate VO; Front panel: silicon VO | Box: polycarbonate VO; Front panel: silicon VO |
Weight | Approx 30 g | Approx 30 g | Approx 30 g | Approx 30 g |
Sealing | IP 20 | IP 20 | IP 20 | IP 20 |
Conformity | CE, EN 61000-6-4, EN 61000-6-2, UL | |||
Set-up | Programmable by RFid (NFC) | |||
RFID - NFC (USB Programmer cod. 2000.35.012) | Yes |
Technical Data
Selectable analogue input | |||
PT100 (2/3/4 wires), Ni100, PT1000 | PT100 (2/3/4 wires), Ni100, TC K-S-R-J-T-N-B-E | 0..20 mA, 4..20 mA, 0..10 V, 10 Ω..200 ΚΩ | |
Digital Input | Button for calibration functions | ||
Isolation | Galvanic isolation input/output | ||
Output resolution | 1μΑ | ||
Range output | Over F.S. + 5°C, Under F.S. - 5°C | Over F.S. + 5°C, Under F.S. - 5°C | |
Failure output | Selectable 21,5mA or 3,8mA | ||
Current output protection | 30 mA approx. | ||
Rejection | 50-60 Hz | ||
Max transmission error | Greater between 0,1% f.s. or 0,2°C | ||
Sampling/Response time | 300ms / approx. 600 ms | ||
Cable resistance | Max 20Ω | Max 20Ω | |
Temperature coefficient | < 100 ppm | < 100 ppm |