DS18 RZR-KP6 Polaris RZR Front Kick Panel Pods

Product Overview

Enhance your Polaris RZR's sound quality with the RZR-KP6! This Polyethylene Front Kick Panel Enclosure allows you to mount one 6.5" Speaker into your Polaris RZR. Engineered in pairs for both Driver and Passenger sides, the enclosure features an elegant black textured finish that harmonizes perfectly with the RZR's factory look. Effortless installation is guaranteed, utilizing the provided bolts and brackets for a precise fit.

(Spanish: Mejora la calidad de sonido de tu Polaris RZR con el RZR-KP6! Este gabinete de panel frontal de polietileno le permite montar un altavoz de 6.5" en su Polaris RZR. Diseñado en pares para el lado del conductor y del pasajero, el gabinete presenta un elegante acabado texturizado en negro que armoniza perfectamente con el aspecto de fábrica del RZR. Se garantiza una instalación sin esfuerzo, utilizando los pernos y soportes proporcionados para un ajuste preciso.)

Features

• Fits Most 6.5" DS18 Speakers.
• Recommended: NXL-6BK Speakers (Not Included).
• Pods Sold as a Set for Driver and Passenger Sides.
• Easy to install with all hardware and wiring included.
• OFC tinned wiring for more power handling and durability.
• 6-core 0.6M Input Wires for RGB Lighting and Speakers.
• Includes Fit Guide.
• Coated Metal Bracket for better resistance to the elements.
• Black Texture finishes like OEM Plastics.
• Durable (PE) waterproof enclosure with UV Protection.
• Sealed Type Enclosure.

Speaker Parameters

• Speaker Mounting Hole: 5.7" / 145mm.
• Speaker Mounting Depth: Up to 4.3" / 110mm.

What's in the Box

• Left & Right Speaker Enclosure
• Mounting Brackets
• Screws and washers

Installation

Step 1: Bolt Removal
There are two bolts on the kick panel that attach the plastic floor panels to the vehicle's chassis. The bottom bolt needs to be removed. This process is the same for both the passenger and driver sides.

Diagram illustrates removing a bolt from the vehicle's kick panel area to detach floor panels.

Step 2: Position Enclosure
Position the enclosure over the threaded stud and plastic bosses. Ensure the cable is unobstructed for proper routing.

Diagram shows the speaker enclosure being placed onto a mounting point, with a cable routed through it.

Step 3: Align and Tighten
Align the holes before inserting mounting screws and tightening.

Diagram depicts screws being inserted into the enclosure's mounting holes for secure attachment.

Connection Options

Option 1: With LED Control Module (LED-BTC)

Connect as shown in the following diagram:

Wiring diagram illustrating connections between the RZR-KP6 enclosure, LED-BTC module, and Battery. Wire color key: Blue LED (-), Red LED (-), Green LED (-), Black 12V DC (+), White Speaker (+), Grey Speaker (-).

Option 2: Without LED Control Module (LED-BTC)

Connect as shown in the following diagram:

• Black wire "BK" connected to battery Positive (+) 12V.
• White Color Light "R", "B", and "G" connected to battery Negative (-).
• Green Color Light "G" connected to battery Negative (-).
• Red Color Light "R" connected to battery Negative (-).
• Blue Color Light "B" connected to battery Negative (-).
• Purple Color Light "R" and "B" connected to battery Negative (-).
• Yellow Color Light "R" and "G" connected to battery Negative (-).
• Cyan Color Light "B" and "G" connected to battery Negative (-).

Wiring diagram showing connections between the RZR-KP6 enclosure and Battery, without the LED-BTC module. Wire color key: Blue LED (-), Red LED (-), Green LED (-), Black 12V DC (+), White Speaker (+), Grey Speaker (-).

General Specifications

Body Features

*This directive exclusively pertains to the box, and its integrity hinges upon the precise installation of the speaker. A sealing ring is necessary to meet waterproof standards and prevent the entry of water or dust into the enclosure. The selection of a speaker is critical to endure the environmental challenges of water and dust exposure; therefore, it is advisable to opt for speakers with a marine rating of at least IP66 to ensure optimal performance and longevity in diverse conditions.

(Spanish: Esta directiva se refiere exclusivamente a la caja y su integridad depende de la instalación precisa del altavoz. Es necesario un anillo de sellado para cumplir con los estándares de impermeabilidad y evitar la entrada de agua o polvo al gabinete. La selección de un orador es fundamental para soportar los desafíos ambientales de la exposición al agua y al polvo; por lo tanto, es recomendable optar por altavoces con una clasificación marina de al menos IP66 para garantizar un rendimiento óptimo y una longevidad en diversas condiciones.)

Enclosure Measurement

• Overall Width: 11.6" / 296mm
• Overall Depth: 6.2" / 159mm
• Overall Height: 9.1" / 233mm

Diagrams provide the external dimensions of the speaker enclosure.

Speaker Measurement

• Mounting Hole Diameter: 5.7" / 145mm
• Mounting Depth: Up to 4.3" / 110mm
• Overall Diameter: Up to 7" / 178mm

RZR Kit Fit Guide

RZR kits are compatible with the following RZR models:

*Not Compatible with Pro XP/ Pro R Model RZR's or existing factory audio systems.

(Spanish: No es compatible con Pro XP/Pro R modelo RZR ni con sistemas de audio de fábrica existentes.)

Warranty & Warnings

Warranty
Please visit our website DS18.com for more information on our warranty policy. DS18 reserves the right to change products and specifications at any time without notice. Images may or may not include optional equipment.

WARNING:
Cancer and Reproductive Harm.
Visit www.P65Warning.ca.gov

(Spanish: GARANTÍA. Visita nuestra página web DS18.com para obtener más información sobre nuestra garantía. Nos reservamos el derecho de cambiar productos y especificaciones en cualquier momento sin previo aviso. Las imágenes pueden incluir o no equipo opcional. ADVERTENCIA: Cáncer y Daño Reproductivo. www.P65Warning.ca.gov)