Assembly Instructions
43163847 UMBRELLA STAND
Care Instructions
Wipe clean with a damp cloth. Do not use abrasive materials and solvents. Check and tighten all parts regularly.
Warning
Do not use umbrellas in high winds. Do not use umbrellas with a diameter larger than 2.5M. Use on a flat surface. The umbrella base is heavy; be careful when moving or lifting. Check the pole is secure every time before use. Suitable for an umbrella with 3.5cm, 3.8cm, or 4.8cm (dia.) pole.
Hardware List
Item | Description | Quantity |
---|---|---|
A | Base Plate | 1 PC |
B | Pole | 1 PC |
C | Collars | 3 PCS |
D | Screw Knob | 1 PC |
E | Bolt | 1 PC |
Assembly Steps
Step 1
Attention: According to the different size of the umbrella pole to choose the corresponding size of the collar.
Insert collars (C) into the top of the pole (B). Note: Align one tab on the collar with the screw knob in the base stem.
Step 2
Insert the pole (B) into the base plate (A). Secure the pole by inserting the bolt (E) from underneath the base plate and tightening it into the pole. The collars (C) are fitted onto the pole.