Olight GOBER User Manual

In the Box

• GOBER
• USB-C Cable
• Backpack Clip

Visual Description: The 'In the Box' section displays images of the GOBER flashlight, a USB-C charging cable, and a backpack clip.

Specifications

IP Rating: IPX4 [water-resistance-level-4]

Dimensions: (D)38mm*(H)21.5mm / (D)1.5in*(H)0.85in

Weight: 16g / 0.56oz

Note: All specifications are test results based on ANSI/NEMA FL1-2009 Standard. The runtimes are recorded while tested in a 25km/h wind.

Charge

Before first use, please charge it fully before you turn it on. Charge directly via the USB-C charging cable.

Standard Charging Time: Approx. 1.5 hours (5V 1A)

Indicator: The cycling red light means charging, while the constant green light means charging completed.

How to Install

Visual Description: The 'How to Install' diagram illustrates attaching the GOBER flashlight to a surface, such as a helmet or strap, using the included backpack clip. The clip is shown attaching to the light, and then the entire assembly is secured to an object.

Safety Information

DANGER ⚠️ DO NOT cover the light when it is on, the radiation energy of the light may cause damage to itself, or even result in the burning of other materials.

EXCLUSION CLAUSE
Olight is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual.

How to Operate

ON/OFF: Long press the power button to turn the light on or off. When the light is turned on, it will return to the previously used mode. The default when you turn it on for the first time is constant red.

CHANGE MODES: While the light is on, double press the power button to switch the current color's constant-on mode and flashing mode.

CHANGE LIGHT COLOR: While the light is on, single press the power button to change the light colors of the constant-on or flashing modes. Starting from the present light color, it will cycle through red-green-blue-white-RGB transition-red with every single press. (Note: The RGB transition is not in the color cycle of the flashing mode.)

SOS: While the light is on, triple-press the power button to access SOS mode. To quit SOS mode, single or double press the button; it will return to the last state used before entering the SOS mode.

Warranty and Support

Warranty

• Within 30 days of purchase: Return to the original seller for repair or replacement.
• Within 2 years of purchase: Return to Olight for repair or replacement.

This warranty does not cover normal wear and tear, modifications, misuse, disintegrations, negligence, accidents, improper maintenance, or repair by anyone other than an authorized retailer or Olight itself.

Customer Support

USA Customer Support: cs@olightstore.com

Global Customer Support: customer-service@olightworld.com

Visit www.olightworld.com to see our complete product line of portable illumination tools.