Eaton M22 Accessory with LED (24V) - Product Environmental Profile
Document ID: EATO-00309-V01.01-EN
Product Identification
Representative product: M22-CLEDC-B (218062)
Product Category: Other Equipment - Passive product - Non-Continuous Operation
Product Description
Eaton Moeller series M22 light blocks are designed to work alongside a contact block. They function as an add-on that mounts to a push button, acting as an indicator light. For example, once the push button is pressed, the light block turns on and illuminates through the button head.
This Product Environmental Profile (PEP) concerns the following product offering from the Eaton Moeller series M22 Accessory with LED (24V):
Homogeneous Environmental Families Covered
- M22-CLEDC-G (216574)
- M22-CLEDC-R (216573)
- M22-CLEDC-W (216572)
- M22-CLED-B (218061)
- M22-CLED-G (216571)
- M22-CLED-R (216570)
- M22-CLED-W (216569)
- M22-LED12-W (279388)
- M22-LED12-R (279389)
- M22-LED-G (216559)
- M22-LEDC-B (218058)
- M22-LEDC-G (216562)
- M22-LEDC-R (216561)
- M22-LEDC-W (216560)
- M22-LED-B (218057)
- M22-LED-R (216558)
- M22-LED-W (216557)
Product Details
Functional Unit: To illuminate the front element with LED, e.g., two contacts rated voltage of 24 V, within a lifespan of 20 years.
Company Information
EATON INDUSTRIES GMB
Kompetenzzentrum Baederstrasse, Holzhausen, Germany, 56357
Email: productstewardship-es@eaton.com
Constituent Materials
Reference product mass (with packaging): 1.58E-02 kg
| Category | PEP Material | Material Constituent | Mass (kg) | % Contribution |
|---|---|---|---|---|
| Plastics | Polyamide 6.6 GF30 | 6.15E-03 | 39.0% | |
| Metals | Copper | 3.26E-03 | 20.6% | |
| Metals | Stainless Steel | 3.24E-03 | 20.5% | |
| Other | Cardboard | 1.66E-03 | 10.5% | |
| Plastics | Low density Polyethylene | 5.02E-04 | 3.2% | |
| Other | Printed Circuit Board | 5.00E-04 | 3.2% | |
| Other | Wood | 2.50E-04 | 1.6% | |
| Other | Electronic Components | 2.06E-04 | 1.3% | |
| Other | Label | 2.50E-05 | 0.2% | |
| Total | 1.58E-02 | 100.00% | ||
Substance Assessment
The representative product is compliant with the EU-RoHS Directive (2011/65/EU) and does not contain any substance listed as Substance-of-Very-High-Concern (SVHC) on the Candidate List of the EU-REACH Regulation (1907/2006/EC).
Additional Environmental Information
Manufacturing
The reference product is assembled at an Eaton plant in Holzhausen, Germany, holding management system certifications according to ISO 14001 standards.
Distribution
Eaton is committed to minimizing weight and volume of product and packaging, focusing on optimizing transport efficiency.
Installation
The installation process requires no energy consumption and generates no waste other than the obsolete product packaging.
Use
The product requires energy consumption during operation.
End of Life
The recyclability rate of the overall product is 39.3% if properly dismantled prior to shredding. This rate is calculated based on the "WEEE recyclability and recoverability calculation method" (version V1, 20 Sep. 2008, presented to the French Agency for Environment and Energy Management: ADEME).
Environmental Impacts
The calculation of environmental impacts is the result of the Product's Life Cycle Analysis (LCA) in accordance with ISO 14040/44, covering the entire lifecycle ("Cradle-to-Grave"), including production, distribution, installation, use, and end-of-life phases. System modeling was performed using the commercial LCA software EIME v6.2.5-3 with database version CODDE-2024-04 (updated on 2024-06-04). Indicators Set: PEF EF 3.1 (Compliance: PEP ed.4, EN15804+A2) v2.0.
Life Cycle Phases
- Manufacturing Phase: The product is assembled and packed at EATON INDUSTRIES GMB, Kompetenzzentrum Baederstrasse, Holzhausen, Germany (56357). Energy model used: Germany.
- Distribution Phase: Distribution of the product in its packaging from Eaton's logistics platform to the installation place in Europe, as per PCR rules.
- Installation Phase: Product is installed in Europe. Installation and packaging waste treatment are considered. No energy consumption for the reference product. Energy model used: Europe.
- Use Phase: Reference lifetime: 20 Years. Usage profile: The product has a power loss of 0.45 W at full load. For non-continuous operation (30% loading rate, 30% use time), total losses are 2.1286 kWh over 20 years. No maintenance/replacement required during useful life. Non-continuous operation considered as per PSR-0005 section 3.15.2.1. Energy model used: Europe.
- End of Life Phase: Product disposed of with WEEE guidelines. Energy model used: Europe.
- Module-D: Calculated according to PCR-ed4-EN-2021 09 06, based on recycled materials and modeled end-of-life scenario. Expresses net benefits and loads beyond system boundaries, not included in life cycle totals.
Mandatory Environmental Impact Indicators
| Indicator | Units | Sum | A1-A3 Manufacturing | A4 Distribution | A5 Installation | B6 Operational Energy Use | C1-C4 End of Life | D Benefits & Loads Beyond System Boundaries |
|---|---|---|---|---|---|---|---|---|
| Climate change - total (GWP) | kg CO2 eq. | 9.33E-01 | 1.58E-01 | 3.76E-03 | 5.56E-03 | 7.50E-01 | 1.48E-02 | -1.68E-02 |
| Climate change - fossil fuels (GWP-f) | kg CO2 eq. | 9.27E-01 | 1.58E-01 | 3.76E-03 | 2.43E-03 | 7.49E-01 | 1.43E-02 | -1.84E-02 |
| Climate change - biogenics (GWP-b) | kg CO2 eq. | 5.54E-03 | 5.72E-04 | 0.00E+00 | 3.13E-03 | 1.38E-03 | 4.54E-04 | 1.60E-03 |
| Climate change - land use and land use transformation (GWP-lu) | kg CO2 eq. | 1.06E-08 | 3.95E-09 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 6.63E-09 | 0.00E+00 |
| Ozone depletion (ODP) | kg eq. CFC-11 | 2.26E-08 | 1.83E-08 | 5.77E-12 | 3.25E-11 | 3.64E-09 | 5.78E-10 | -5.11E-09 |
| Acidification (AP) | mole of H+ eq. | 5.62E-03 | 1.63E-03 | 2.39E-05 | 7.30E-06 | 3.84E-03 | 1.16E-04 | -3.96E-04 |
| Freshwater eutrophication (EP-fw) | kg P eq. | 2.16E-05 | 7.02E-06 | 1.41E-09 | 3.34E-08 | 1.98E-06 | 1.26E-05 | -6.99E-08 |
| Marine aquatic eutrophication (EP-m) | kg of N eq. | 6.81E-04 | 1.67E-04 | 1.12E-05 | 2.80E-06 | 4.68E-04 | 3.14E-05 | -1.46E-05 |
| Terrestrial eutrophication (EP-t) | mole of N eq. | 9.26E-03 | 1.40E-03 | 1.23E-04 | 2.22E-05 | 7.52E-03 | 1.86E-04 | -1.58E-04 |
| Photochemical ozone formation (POCP) | kg of NMVOC eq. | 2.02E-03 | 4.57E-04 | 3.09E-05 | 5.18E-06 | 1.47E-03 | 5.06E-05 | -7.16E-05 |
| Depletion of abiotic resources - elements (ADPe) | kg eq. Sb | 1.57E-05 | 1.51E-05 | 1.48E-10 | 1.07E-10 | 2.65E-07 | 4.06E-07 | -4.40E-06 |
| Depletion of abiotic resources - fossil fuels (ADP-f) | MJ | 2.25E+01 | 2.86E+00 | 5.26E-02 | 2.33E-02 | 1.89E+01 | 6.54E-01 | -2.84E-01 |
| Water scarcity (WDP) | m3 of eq. deprivation worldwide | 5.04E-01 | 1.23E-01 | 1.43E-05 | 1.74E-04 | 5.75E-02 | 3.23E-01 | -2.16E-02 |
Mandatory Inventory Flow Indicators
| Indicator | Units | Sum | A1-A3 Manufacturing | A4 Distribution | A5 Installation | B6 Operational Energy Use | C1-C4 End of Life | D Benefits & Loads Beyond System Boundaries |
|---|---|---|---|---|---|---|---|---|
| Use of renewable primary energy, excluding renewable primary energy resources used as raw materials | MJ | 5.11E+00 | 8.14E-02 | 7.01E-05 | 4.21E-03 | 5.01E+00 | 1.41E-02 | -3.96E-03 |
| Use of renewable primary energy resources used as raw materials | MJ | 1.81E-01 | 1.81E-01 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 | -2.60E-02 |
| Total use of renewable primary energy resources (primary energy and primary energy resources used as raw materials) | MJ | 5.29E+00 | 2.62E-01 | 7.01E-05 | 4.21E-03 | 5.01E+00 | 1.41E-02 | -2.99E-02 |
| Use of non-renewable primary energy, excluding non-renewable primary energy resources used as raw materials | MJ | 2.23E+01 | 2.65E+00 | 5.26E-02 | 2.33E-02 | 1.89E+01 | 6.54E-01 | -2.74E-01 |
| Use of non-renewable primary energy resources used as raw materials | MJ | 2.14E-01 | 2.14E-01 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 | -9.78E-03 |
| Total use of non-renewable primary energy resources (primary energy and primary energy resources used as raw materials) | MJ | 2.25E+01 | 2.86E+00 | 5.26E-02 | 2.33E-02 | 1.89E+01 | 6.54E-01 | -2.84E-01 |
| Use of secondary materials | kg | 3.23E-05 | 3.23E-05 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
| Use of renewable secondary fuels | MJ | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
| Use of non-renewable secondary fuels | MJ | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
| Net use of fresh water | m3 | 1.27E-02 | 2.90E-03 | 3.33E-07 | 1.27E-05 | 1.35E-03 | 8.42E-03 | -5.03E-04 |
| Hazardous waste disposed of | kg | 8.90E-01 | 8.41E-01 | 0.00E+00 | 2.06E-04 | 3.29E-02 | 1.59E-02 | -3.70E-01 |
| Non-hazardous waste disposed of | kg | 2.20E-01 | 8.94E-02 | 1.32E-04 | 9.96E-04 | 1.27E-01 | 3.12E-03 | -5.68E-03 |
| Radioactive waste disposed of | kg | 1.20E-04 | 9.05E-05 | 9.42E-08 | 1.54E-07 | 2.91E-05 | 2.98E-07 | -2.87E-06 |
| Components for re-use | kg | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
| Materials for recycling | kg | 1.54E-02 | 9.20E-03 | 0.00E+00 | 1.66E-03 | 0.00E+00 | 4.55E-03 | 0.00E+00 |
| Materials for energy recovery | kg | 5.30E-04 | 3.40E-04 | 0.00E+00 | 1.90E-04 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
Optional Environmental Impact Indicators
| Indicator | Units | Sum | A1-A3 Manufacturing | A4 Distribution | A5 Installation | B6 Operational Energy Use | C1-C4 End of Life | D Benefits & Loads Beyond System Boundaries |
|---|---|---|---|---|---|---|---|---|
| Emission of fine particles | incidence of diseases | 4.61E-08 | 1.44E-08 | 1.94E-10 | 4.45E-11 | 3.09E-08 | 5.60E-10 | -5.05E-09 |
| Ionizing radiation, human health | kBq of U235 eq. | 2.45E+00 | 1.37E+00 | 9.18E-06 | 4.12E-04 | 1.08E+00 | 1.76E-03 | -5.63E-01 |
| Ecotoxicity, fresh water | CTUe | 3.01E+00 | 1.08E+00 | 2.47E-03 | 2.91E-02 | 1.42E+00 | 4.79E-01 | -1.47E-01 |
| Human toxicity, cancer effects | CTUh | 3.78E-08 | 3.73E-08 | 6.62E-14 | 2.02E-10 | 9.43E-11 | 1.78E-10 | -1.90E-08 |
| Human toxicity, non-cancer effects | CTUh | 1.53E-08 | 1.18E-08 | 1.28E-12 | 6.96E-12 | 2.25E-09 | 1.25E-09 | -4.55E-09 |
| Impacts related to land use/soil quality | - | 8.10E-02 | 1.90E-02 | 0.00E+00 | 7.34E-06 | 2.08E-02 | 4.12E-02 | -1.02E-06 |
| Total use of primary energy during the life cycle | MJ | 2.78E+01 | 3.12E+00 | 5.26E-02 | 2.75E-02 | 2.40E+01 | 6.69E-01 | -3.14E-01 |
Multiplying Factors for Use Phase for Homogenous Products
To evaluate the environmental impact of other products covered by this PEP, multiply the impact figures by the factors below for Manufacturing, Distribution, Installation, End-of-Life, and Module-D Phases.
| Product Number | Product Description | Equipment Heat Dissipation, Current-Dependent (W) | Use Phase Extrapolation Factors |
|---|---|---|---|
| 218062 (Reference) | M22-CLEDC-B (Reference) | 0.45 | 1 |
| 216574 | M22-CLEDC-G | 0.45 | 1 |
| 216573 | M22-CLEDC-R | 0.45 | 1 |
| 216572 | M22-CLEDC-W | 0.45 | 1 |
| 218061 | M22-CLED-B | 0.45 | 1 |
| 216571 | M22-CLED-G | 0.45 | 1 |
| 216570 | M22-CLED-R | 0.45 | 1 |
| 216569 | M22-CLED-W | 0.45 | 1 |
| 279388 | M22-LED12-W | 0.45 | 1 |
| 279389 | M22-LED12-R | 0.45 | 1 |
| 216559 | M22-LED-G | 0.45 | 1 |
| 218058 | M22-LEDC-B | 0.45 | 1 |
| 216562 | M22-LEDC-G | 0.45 | 1 |
| 216561 | M22-LEDC-R | 0.45 | 1 |
| 216560 | M22-LEDC-W | 0.45 | 1 |
| 218057 | M22-LED-B | 0.45 | 1 |
| 216558 | M22-LED-R | 0.45 | 1 |
| 216557 | M22-LED-W | 0.45 | 1 |
Disclaimer and Verification
This Product Environmental Profile and its content is based on information available at the date of issue. No express or implied representations or warranties are made with respect to the information contained herein.
Registration Details
| Registration Number: EATO-00309-V01.01-EN | Drafting rules: PCR-ed4-EN-2021 09 06 |
| Verifier accreditation Number: VH56 | Supplemented by: PSR-0005-ed3.1-EN-2023 12 08 |
| Date of issue: 04-2025 | Information and reference documents: www.pep-ecopassport.org |
| Validity period: 5 years |
Independent verification of the declaration and data, in compliance with ISO 14025: 2006
- Internal: X
- External:
The PCR review was conducted by a panel of experts chaired by Julie Orgelet (DDemain).
PEPs are compliant with XP C08-100-1:2016 and EN 50693:2019.
The components of the present PEP may not be compared with components from any other program.
Document complies with ISO 14025: 2006 « Environmental labels and declarations. Type III environmental declarations ».
