Product Overview
Representative Product
M22-CK20 (Y7-107898)
Product Category
Other Equipment - Passive and Non-Continuous Operation
Description of the Product
Eaton Moeller series M22 contact elements are vital for industrial control and automation. They open or close electrical circuits to control machinery, integrate into safety circuits for emergency stops, and pair with indicator lights to provide status feedback, enhancing system reliability and safety.
Homogeneous Environmental Families Covered
- Y7-107898: M22-CK20
- Y7-107899: M22-CK02
- Y7-107940: M22-CK11
- Y7-216385: M22-CK01
- Y7-262510: M22-CK01D
- Y7-216384: M22-CK10
- Y7-216387: M22-CKC01
- Y7-216386: M22-CKC10
- Y7-216378: M22-K01
- Y7-262165: M22-K01D
- Y7-216379: M22-K01-GVP
- Y7-150643: M22-K01PV6
- Y7-216376: M22-K10
- Y7-216377: M22-K10-GVP
- Y7-110835: M22-K10P
- Y7-216382: M22-KC01
- Y7-216383: M22-KC01-GVP
- Y7-216380: M22-KC10
- Y7-216381: M22-KC10-GVP
Functional Unit
Switch on and off electrical power supply of the control unit with an electrical and/or mechanical control during 20 years of lifetime.
Company Information
EATON INDUSTRIES GMB
Kompetenzzentrum Baederstrasse, Holzhausen, Germany, 56357
Email: productstewardship-es@eaton.com
Constituent Materials
Reference product mass: 3.33E-02 kg (With packaging)
| Category | PEP Material | Material constituent | Mass (kg) | % Contribution |
|---|---|---|---|---|
| Metals | Copper | Copper | 9.96E-03 | 29.9% |
| Metals | Steel Wire Rod | Steel Wire Rod | 9.68E-03 | 29.1% |
| Plastics | Polyamide 66 GF30 | Polyamide 66 GF30 | 8.39E-03 | 25.2% |
| Others | Cardboard | Cardboard | 1.68E-03 | 5.0% |
| Plastics | Polyamide 6 | Polyamide 6 | 1.51E-03 | 4.5% |
| Metals | Bronze | Bronze | 8.60E-04 | 2.6% |
| Plastics | Low Density Polyethylene | Low Density Polyethylene | 5.02E-04 | 1.5% |
| Others | Wood | Wood | 5.00E-04 | 1.5% |
| Metals | Silver | Silver | 1.82E-04 | 0.5% |
| Others | Label | Label | 2.50E-05 | 0.1% |
| Total | 3.33E-02 | 100.00% | ||
Substance Assessment
The representative product is compliant with the EU-RoHS Directive (2011/65/EU) and the product doesn't contain any substance listed as Substance-of-Very-High-Concern (SVHC) on the Candidate List of the EU-REACH Regulation (1907/2006/EC).
Additional Environmental Information
Manufacturing
The reference product is assembled at an Eaton plant in Holzhausen, Germany holding management system certifications according to ISO 14001 standards.
Distribution
Eaton is committed to minimizing weight and volume of product and packaging with focus to optimize transport efficiency.
Installation
The installation process does not require any energy consumption and there is no waste other than the obsolete product packaging generated during this step.
Use
The product requires energy consumption during operation.
End of life
The recyclability rate of the overall product is 48.4% if it is properly dismantled prior to shredding. The rate is calculated based on "WEEE recyclability and recoverability calculation method" (version V1, 20 Sep. 2008 presented to the French Agency for Environment and Energy Management: ADEME).
Environmental Impacts: Mandatory Indicators
The calculation of the environmental impacts is the result of the Product's Life Cycle Analysis in accordance with ISO 14040/44, covering the entire lifecycle, i.e., "Cradle-to-Grave" including the following life cycle phases: production, distribution, installation, use and end of life.
System Modelling
System modelling was carried out using the commercial LCA software EIME v6.2.5-4 with database version CODDE-2024-04 - updated on 2024-06-04. Indicators Set: PEF EF 3.1 (Compliance: PEP ed.4, EN15804+A2) v2.0.
Phase Descriptions
Manufacturing Phase
The product is assembled as well as packed at EATON INDUSTRIES GMB Kompetenzzentrum Baederstrasse, Holzhausen, Germany plant. Energy model used: Germany
Distribution Phase
Distribution of the product in its packaging from the Eaton's last logistics platform to the installation place in Europe is considered as per PCR rules.
Installation Phase
Product is installed in Europe. Installation of product and treatment of packaging waste are considered in this phase. There is no energy consumption for reference product. Energy model used: Europe
Use Phase
Reference lifetime: 20 Years. Usage profile: The product has power loss of 0.05 W at full load condition. For non-continuous operation considering 30% of the loading rate and 30% of the use time rate, total losses are 0.23652 kWh over the 20 years. Product do not require any maintenance/replacement during useful life. Non-continuous operation is considered as per PSR-0005 section 3.15.2.1. Energy model used: Europe
End of life Phase
Product disposed with WEEE guidelines. Energy model used: Europe
Module-D
Module D is calculated according to PCR-ed4-EN-2021 09 06 based on the materials recycled and the modelled end-of-life scenario. It expresses the net benefits and loads beyond the boundaries of the system and are not to be included in the life cycle totals.
Mandatory Environmental Impact Indicators Summary
| Mandatory environmental impact indicators | Units | Sum | A1-A3 Manufacturing | A4 Distribution | A5 Installation | B6 Operational energy use | C1-C4 End of life | D - Benefits and loads beyond the system boundaries |
|---|---|---|---|---|---|---|---|---|
| Climate change - total (GWP) | kg CO2 eq. | 3.64E-01 | 2.27E-01 | 7.93E-03 | 6.20E-03 | 8.34E-02 | 3.90E-02 | -4.57E-02 |
| Climate change - fossil fuels (GWP-f) | kg CO2 eq. | 3.56E-01 | 2.25E-01 | 7.93E-03 | 2.65E-03 | 8.32E-02 | 3.77E-02 | -4.67E-02 |
| Climate change - biogenics (GWP-b) | kg CO2 eq. | 7.47E-03 | 2.47E-03 | 0.00E+00 | 3.54E-03 | 1.53E-04 | 1.30E-03 | 1.02E-03 |
| Climate change - land use and land use transformation (GWP-lu) | kg CO2 eq. | 3.49E-08 | 1.13E-08 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 2.36E-08 | 0.00E+00 |
| Ozone depletion (ODP) | kg eq. CFC-11 | 1.69E-08 | 1.50E-08 | 1.22E-11 | 3.40E-11 | 4.04E-10 | 1.37E-09 | -5.69E-09 |
| Acidification (AP) | mole of H+ eq. | 4.14E-03 | 3.38E-03 | 5.03E-05 | 7.63E-06 | 4.27E-04 | 2.73E-04 | -1.15E-03 |
| Freshwater eutrophication (EP-fw) | kg P eq. | 6.38E-05 | 2.15E-05 | 2.98E-09 | 3.46E-08 | 2.19E-07 | 4.20E-05 | -2.24E-07 |
| Marine aquatic eutrophication (EP-m) | kg of N eq. | 3.59E-04 | 2.43E-04 | 2.36E-05 | 2.90E-06 | 5.20E-05 | 3.84E-05 | -3.83E-05 |
| Terrestrial eutrophication (EP-t) | mole of N eq. | 3.74E-03 | 2.14E-03 | 2.59E-04 | 2.34E-05 | 8.36E-04 | 4.86E-04 | -4.23E-04 |
| Photochemical ozone formation (POCP) | kg of NMVOC eq. | 1.13E-03 | 7.63E-04 | 6.52E-05 | 5.48E-06 | 1.64E-04 | 1.32E-04 | -1.97E-04 |
Mandatory Environmental Impact Indicators (Continued)
| Mandatory environmental impact indicators | Units | Sum | A1-A3 Manufacturing | A4 Distribution | A5 Installation | B6 Operational energy use | C1-C4 End of life | D - Benefits and loads beyond the system boundaries |
|---|---|---|---|---|---|---|---|---|
| Depletion of abiotic resources - elements (ADPe) | kg eq. Sb | 2.55E-04 | 2.53E-04 | 3.13E-10 | 1.11E-10 | 2.95E-08 | 1.36E-06 | -1.03E-04 |
| Depletion of abiotic resources - fossil fuels (ADP-f) | MJ | 9.28E+00 | 5.16E+00 | 1.11E-01 | 2.43E-02 | 2.10E+00 | 1.88E+00 | -1.20E+00 |
| Water scarcity (WDP) | m3 of eq. deprivation worldwide | 6.17E-01 | 5.67E-01 | 3.02E-05 | 1.79E-04 | 6.39E-03 | 4.33E-02 | -2.06E-01 |
Inventory Flow Indicators: Mandatory
| Inventory flow indicators | Units | Sum | A1-A3 Manufacturing | A4 Distribution | A5 Installation | B6 Operational energy use | C1-C4 End of life | D - Benefits and loads beyond the system boundaries |
|---|---|---|---|---|---|---|---|---|
| Use of renewable primary energy, excluding renewable primary energy resources used as raw materials | MJ | 7.72E-01 | 1.73E-01 | 1.48E-04 | 5.48E-03 | 5.57E-01 | 3.68E-02 | -3.44E-02 |
| Use of renewable primary energy resources used as raw materials | MJ | 1.86E-01 | 1.86E-01 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 | -2.79E-02 |
| Total use of renewable primary energy resources (primary energy and primary energy resources used as raw materials) | MJ | 9.58E-01 | 3.59E-01 | 1.48E-04 | 5.48E-03 | 5.57E-01 | 3.68E-02 | -6.23E-02 |
| Use of non-renewable primary energy, excluding non-renewable primary energy resources used as raw materials | MJ | 8.98E+00 | 4.86E+00 | 1.11E-01 | 2.43E-02 | 2.10E+00 | 1.88E+00 | -1.19E+00 |
| Use of non-renewable primary energy resources used as raw materials | MJ | 3.04E-01 | 3.04E-01 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 | -9.73E-03 |
| Total use of non-renewable primary energy resources (primary energy and primary energy resources used as raw materials) | MJ | 9.28E+00 | 5.16E+00 | 1.11E-01 | 2.43E-02 | 2.10E+00 | 1.88E+00 | -1.20E+00 |
| Use of secondary materials | kg | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
| Use of renewable secondary fuels | MJ | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
| Use of non-renewable secondary fuels | MJ | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
| Net use of fresh water | m3 | 1.44E-02 | 1.32E-02 | 7.02E-07 | 1.30E-05 | 1.50E-04 | 1.01E-03 | -4.80E-03 |
| Hazardous waste disposed of | kg | 2.40E+00 | 2.36E+00 | 0.00E+00 | 2.37E-04 | 3.65E-03 | 3.63E-02 | -9.58E-01 |
| Non-hazardous waste disposed of | kg | 4.77E-02 | 2.43E-02 | 2.79E-04 | 1.11E-03 | 1.41E-02 | 7.99E-03 | -4.02E-03 |
| Radioactive waste disposed of | kg | 1.70E-05 | 1.19E-05 | 1.99E-07 | 1.61E-07 | 3.23E-06 | 1.47E-06 | -3.31E-06 |
| Components for re-use | kg | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
| Materials for recycling | kg | 3.00E-02 | 1.39E-02 | 0.00E+00 | 1.76E-03 | 0.00E+00 | 1.43E-02 | 0.00E+00 |
| Materials for energy recovery | kg | 1.57E-03 | 1.07E-03 | 0.00E+00 | 5.03E-04 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
| Exported energy | MJ by energy vector | 2.53E-04 | 0.00E+00 | 0.00E+00 | 2.53E-04 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
| Biogenic carbon content of the product | kg of C. | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 | 0.00E+00 |
Environmental Impacts: Optional Indicators
| Optional Environmental impact indicators | Units | Sum | A1-A3 Manufacturing | A4 Distribution | A5 Installation | B6 Operational energy use | C1-C4 End of life | D - Benefits and loads beyond the system boundaries |
|---|---|---|---|---|---|---|---|---|
| Emission of fine particles | incidence of diseases | 2.58E-08 | 2.04E-08 | 4.09E-10 | 4.66E-11 | 3.44E-09 | 1.55E-09 | -7.00E-09 |
| Ionizing radiation, human health | kBq of U235 eq. | 4.19E+00 | 4.07E+00 | 1.93E-05 | 4.29E-04 | 1.20E-01 | 4.18E-03 | -1.67E+00 |
| Ecotoxicity, fresh water | CTUe | 4.28E+01 | 4.13E+01 | 5.20E-03 | 3.01E-02 | 1.57E-01 | 1.30E+00 | -5.11E-01 |
| Human toxicity, cancer effects | CTUh | 1.17E-08 | 1.14E-08 | 1.40E-13 | 2.05E-10 | 1.05E-11 | 4.51E-11 | -3.71E-09 |
| Human toxicity, non-cancer effects | CTUh | 4.08E-08 | 3.72E-08 | 2.70E-12 | 7.27E-12 | 2.50E-10 | 3.43E-09 | -1.43E-08 |
| Impacts related to land use/soil quality | - | 1.85E-01 | 5.93E-02 | 0.00E+00 | 8.04E-06 | 2.31E-03 | 1.24E-01 | -1.55E-04 |
| Total use of primary energy during the life cycle | MJ | 1.02E+01 | 5.52E+00 | 1.11E-01 | 2.97E-02 | 2.66E+00 | 1.92E+00 | -1.26E+00 |
*Only B6 (Energy Consumption) are taken into account, the other sub-modules of the use phase (B1, B3-B5, B7) are zero.
Multiplying Factors for Use Phase for homogenous products
| Part Number | Product Description | Equipment heat dissipation, current-dependent (W) | Use Phase Extrapolation Factors |
|---|---|---|---|
| Y7-107898 (Reference) | M22-CK20 | 0.05 | 1.00 |
| Y7-107899 | M22-CK02 | 0.05 | 1.00 |
| Y7-107940 | M22-CK11 | 0.05 | 1.00 |
| Y7-216385 | M22-CK01 | 0.11 | 2.20 |
| Y7-262510 | M22-CK01D | 0.11 | 2.20 |
| Y7-216384 | M22-CK10 | 0.11 | 2.20 |
| Y7-216387 | M22-CKC01 | 0.11 | 2.20 |
| Y7-216386 | M22-CKC10 | 0.11 | 2.20 |
| Y7-216378 | M22-K01 | 0.11 | 2.20 |
| Y7-262165 | M22-K01D | 0.11 | 2.20 |
| Y7-216379 | M22-K01-GVP | 0.11 | 2.20 |
| Y7-150643 | M22-K01PV6 | 0.11 | 2.20 |
| Y7-216376 | M22-K10 | 0.11 | 2.20 |
| Y7-216377 | M22-K10-GVP | 0.11 | 2.20 |
| Y7-110835 | M22-K10P | 0.11 | 2.20 |
| Y7-216382 | M22-KC01 | 0.11 | 2.20 |
| Y7-216383 | M22-KC01-GVP | 0.11 | 2.20 |
| Y7-216380 | M22-KC10 | 0.11 | 2.20 |
| Y7-216381 | M22-KC10-GVP | 0.11 | 2.20 |
Disclaimer
This Product Environmental Profile and its content are based on information available to us. It refers to the product at the date of issue. We make no express or implied representations or warranties with respect to the information contained herein.
Verification and Compliance
- Registration Number: EATO-00317-V01.01-EN
- Verifier accreditation Number: VH56
- Date of issue: 04-2025
- Drafting rules: PCR-ed4-EN-2021 09 06
- Supplemented by: PSR-0005-ed3.1-EN-2023 12 08
- Information and reference documents: www.pep-ecopassport.org
- Validity period: 5 years
- Independent verification: Internal [X], External
- PCR review conducted by experts chaired by Julie Orgelet (DDomain).
- PEPs are compliant with XP C08-100-1:2016 and EN 50693:2019.
- The components of the present PEP may not be compared with components from any other program.
- Document complies with ISO 14025: 2006 « Environmental labels and declarations. Type III environmental declarations ».
