GE Winterberry® Branch Tree
Color Choice® LED Technology
Assembly Instructions
CAUTION: EXERCISE CARE WHEN UNPACKING AND ASSEMBLING
Nicolas Holiday Ltd. thanks you for purchasing this pre-lit Christmas tree. Should you have any problems with your tree, visit us at www.geholidaylighting.com for more information.
You can call our toll-free number at 1-877-398-7337. Check our website for latest service hours and assembly instruction videos.
WARNING:
Risk of fire and electric shock. Disconnect light set from power before starting.
- Keep wires clear of being pinched or cut during assembly or installation.
- Do not press or grasp bulbs during assembly or installation.
- Before starting make sure stakes are clear of underground sprinkler, telephone and power lines.
- Please read all instructions and warnings included with this product before using.
1. Carefully unpack, removing any bubble wrap and inspect the contents of your tree. {Fig. A}
Fig. A shows the tree sections: Top section, Middle section, Bottom section, Instruction manual, Metal stand and 4 stakes.
Visual representation of the tree components including Top section, Middle section, Bottom section, Instruction manual, and Metal stand with 4 stakes.
The tree stand should be open and set at a 90° angle. Remember to tighten the thumbscrew after connecting the bottom section and the tree stand. See {Fig. B}
Untie red twist-tie to release branch panels. Gently position any branches that do not fall into place. Your assembled tree may be heavy and difficult to move when done, so place the stand in desired location before assembling. Secure in place using the (4) metal stakes.
Illustration showing the tree stand being opened to a 90° angle and secured with a thumbscrew. It also shows the process of untying the red twist-tie to release branch panels.
2. When you connect two tree sections, it is important that you align the mark on the tree poles. See {Fig. C}
Assemble section by section.
Visual guide demonstrating how to align the marks on the tree poles when connecting two sections.
Disconnect the decorative item from the power source before performing any maintenance or cleaning.
Indoor/Outdoor 120V
THIS IS NOT A TOY, FOR DECORATIVE USE ONLY.
GE is a trademark of General Electric Company and is under license by Nicolas Holiday Ltd.
3. To electrically connect the lighted sections:
First, locate the 2 white connector cord tags between each section. Then fully insert the 2-pin polarized male and female connectors. Fully screw on the cap to secure connection.
4. To illuminate, find and un-hank the long lead wire from the bottom section.
Fully insert the direct plug-in adapter into a working GFCI outlet or an outdoor-rated extension cord.
NOTE: Hammer/Mallet may be required for stakes.
A visual representation of a 5 FT tree being assembled, showing the Top section, Middle section, and Bottom section being connected. It also includes a control box and the Tree Stand.
A schematic illustration of the tree assembly process, indicating the connection points and the control box.
Troubleshooting Tips
If one section of your tree does not illuminate, check that section for cut or damage wires or that all electrical connections on tree are made.
Due to unique construction of the light sets, the individual LEDs are not replaceable. The light sets are designed for continued operation even if an individual LED fails to light.
IMPORTANT: Store your carton neatly in a cool, dry location protected from sunlight to prolong the tree life and to better keep the light sets in working order. Do not place a heavy load on the carton to avoid damage to or crushing the carton and tree inside.
NO Spare Bulbs
Approx. Asm. Time: 5-10 minutes
Tree Sections: 3
Tree Stand: Metal
