Welcome

Hello

The Lightcloud Blue 5-Pin Plug-in MVS Controller can be attached to any compatible lighting device to connect to the Lightcloud Blue system. Adjust dim level, color temperature, sensor settings, and create schedules or scenes with the Lightcloud Blue mobile App.

Specifications

PART NUMBER: CONTROL/W/AUX/5SP/LCBS/MVS

PRODUCT DIMENSIONS: 1.85"D x 1.85"L x 2.24"H

SENSOR COVERAGE: 32 ft. diameter at 39 ft.

SENSOR CONNECTION: 5-Pin Aux Plug

MOUNTING HEIGHT: 39 ft.

ENVIRONMENT: Indoor

WIRELESS RANGE (Microwave MVS): 60 ft.

Setup & Installation

1. Install Controller

   Lightcloud Blue 5-Pin Plug-in MVS Controller is only compatible with select sensor-ready lamps. Visit [www.rablighting.com](http://www.rablighting.com) to see the full compatibility list.

   1a. Remove plastic plug from lamp, then insert Lightcloud Blue 5-Pin Plug-in MVS Controller into sensor port.

   [Diagram Description: Illustration shows a lamp with a plastic plug being removed and the controller being inserted into the sensor port.]

   1b. Install the lamp with the connected Lightcloud Blue 5-Pin Plug-in MVS Controller into a compatible fixture.

   [Diagram Description: Illustration shows a fixture, a lamp, and the controller being connected and mounted.]

2. Turn power on

3. Enable Device Pairing Mode

   For the first time use, the Lightcloud Blue 5-Pin Plug-in MVS Controller is ready to be paired as soon as it is powered on. If your Lightcloud Blue 5-Pin Plug-in MVS Controller is already paired, you can reset it by using the Rapid Reset Tool Method.

   The rapid reset process must be done by professional electricians qualified by RAB. Reach out to your RAB sales manager to request a Rapid Reset Tool. The tool simply needs to be placed directly on the Lightcloud Blue 5-Pin Plug-in MVS Controller for 2 seconds. The lamp will flash 3 times, then reset to 100% brightness at default CCT of 3000K.

   [Diagram Description: Illustration shows the Lightcloud Blue Logo on the controller.]

Controlling your Lightcloud Blue Device

1. Confirm your lamp with 5-Pin Plug-in MVS controller is powered on.
2. Download the Lightcloud Blue app from the Apple® App Store or Google® Play store.
   [Download on the App Store] | [Get it on Google Play]
3. Launch the App to create a new account or login to an existing one.
4. Tap the "add device" icon ➕ in the app to start connecting devices.
5. Follow the remaining steps in the app. Create areas, groups, and scenes to organize and control your devices.
6. Adjust the Dim-to-Off Threshold (0-2V) to get the lowest dim level in the device setting. (Default threshold 1V)
7. You're all set! ✔️

Sensor Coverage

This figure indicates the maximum distance at the highest mounting height with 100% sensitivity.

Ceiling Mounted

[Diagram Description: Graph showing sensor coverage for ceiling mounting. X-axis represents distance (ft/m), Y-axis represents mounting height (ft/m). Shows 'Well Detected Area' and 'Possibly Detected Area' zones. Includes a person icon indicating detection.]

Wall Mounted

[Diagram Description: Graph showing sensor coverage for wall mounting. X-axis represents distance (ft/m), Y-axis represents mounting height (ft/m). Shows 'Well Detected Area' and 'Possibly Detected Area' zones. Includes a person icon indicating detection.]

FCC Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Note: This device has been tested and found to comply with the limits for Class B digital devices pursuant to Part 15 Subpart B, of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential environment. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To comply with the FCC's RF exposure limits for general population / uncontrolled exposure, this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

CAUTION: Changes or modifications to this equipment not expressly approved by RAB Lighting may void the user's authority to operate this equipment.

Configuration

All configuration of Lightcloud Blue products may be performed using the Lightcloud Blue mobile app. Learn more at [www.rablighting.com](http://www.rablighting.com)

Contact:

1(844) LIGHTCLOUD
1(844) 544-4825
support@lightcloud.com

©2023 RAB LIGHTING Inc. Custom manufactured in China. Pat. rablighting.com/ip