MANDAL Bed Frame with Storage

Product Overview

This document provides assembly instructions for the IKEA MANDAL bed frame with storage. It details the required tools, parts, and step-by-step guidance for constructing the furniture.

Tools Required

You will need the following tools for assembly:

• Phillips head screwdriver [screwdriver]
• Flat head screwdriver [screwdriver]
• Hammer [hammer]
• Allen key (included, part 100092) [allen-key]

Important: Assembly is recommended for two people. Ensure you have adequate space and protect your floor during assembly.

Parts List

Assembly Steps

Step 1

Prepare the main frame side panels. Insert 20x dowels (123026) into the designated holes on the side panels.

Step 2

Connect the main frame side panels to the base frame elements. Ensure the holes align correctly.

Step 3

Secure the connections from Step 2 using 4x screws (109572) and 8x dowels (100214).

Step 4

Attach the support pieces (119500) to the frame. Insert 26x bolts/dowels (118331) and secure with 4x cam locks (100365).

Step 5

Attach the longer side panels to the frame. Insert 66x dowels (110630) and secure with 48x cam locks (100365).

Step 6

Insert 2x dowels (101357) into the designated holes on the frame.

Step 7

Attach the headboard/footboard components to the frame, aligning them with the inserted dowels.

Step 8

Secure the headboard/footboard components using 16x screws (110519) and 16x cam locks (110630).

Step 9

Insert 12x dowels (101350) into the central support beams.

Step 10

Attach the central support beams to the frame. Use 4x screws (109504).

Step 11

Secure the central support beams using 2x dowels (101357) and 12x cam locks (101350).

Step 12

Attach the main frame supports using 4x screws (109572).

Step 13

Prepare the slatted bed base components. Insert 4x dowels (101350) into the slats.

Step 14

Attach the slatted bed base supports. Use 6x screws (100214) and the Allen key (100092).

Step 15

Attach the sliding drawer rails (113338) to the main frame. Use 8x bolts/dowels (123026) and 8x cam locks (110630).

Step 16

Position and attach the main drawer support structure to the frame.

Step 17

Secure the drawer support structure using 8x bolts/dowels (110630) and 8x cam locks (110630).

Step 18

Attach the drawer side supports to the frame. Use 4x screws (101350) and 4x dowels (110630).

Step 19

Assemble drawer side panels. Insert 4x dowels (101350) into the drawer side panels.

Step 20

Attach the drawer side panels to the drawer bases. Use 4x screws (109572).

Step 21

Secure the drawer components using 4x bolts/dowels (118331).

Step 22

Attach drawer front supports. Use 4x screws (110630).

Step 23

Secure drawer front supports with 4x dowels (110630) and 4x cam locks (110630).

Step 24

Attach drawer bases to the assembled drawer sides. Use 2x screws (100214).

Step 25

Secure drawer bases using 10x small pieces (119500) and screws (119500).

Step 26

Attach drawer runners (118231) to the assembled drawer boxes. Use 6x screws (100365).

Step 27

Attach drawer runners (118231) to the assembled drawer boxes. Use 6x screws (100365).

Step 28

Place the slatted bed base onto the main frame.

Step 29

Secure the slatted bed base using 6x fasteners (113338).

Step 30

Prepare drawer front panels. Attach 4x bolts/dowels (118331) to the drawer front.

Step 31

Insert vertical drawer dividers into the drawer boxes.

Step 32

Secure vertical drawer dividers using 4x dowels (110630) and 4x cam locks (110630).

Step 33

Complete the drawer box assembly.

Step 34

Attach drawer front panels to the drawer boxes. Use 4x screws (110519).

Step 35

Secure drawer fronts using 1x screw (105344).

Step 36

Attach drawer slides to the drawer boxes.

Step 37

Attach drawer slides to the drawer boxes using 1x screw (105344).

Step 38

Slide the assembled drawers into the bed frame.

Step 39

Insert the slatted bed base into the frame, securing it with 6x fasteners (100365).

Step 40

Pull out the drawers to check functionality and ensure smooth operation.