Let's get started.

GL-iNet Spitz AX

5G NR Wi-Fi 6 Router (GL-X3000NR)

4G LTE Wi-Fi 6 Router (GL-X3000C16)

Setting Up

1. Insert Cards & Power On

When powered up, your router will broadcast both 2.4G and 5G Wi-Fi signals with the SSIDs: GL-X3000-xxx and GL-X3000-xxx-5G.

Note: Hot plugging for TF card and Nano-SIM card is not supported for this router.

Action: Insert a Nano-SIM card into the Nano-SIM card slot and a TF card into the TF card slot. Then, plug in the power cable.

Diagram Description: The diagram shows a router with callouts pointing to the Nano-SIM Card slot and the TF Card slot. It also illustrates plugging in the power cable.

2. Connect to the Network

You can connect via Wi-Fi or LAN:

Connect via Wi-Fi

Connect to the Wi-Fi network named GL-X3000-xxx or GL-X3000-xxx-5G. Input the default Wi-Fi password, which is printed on the bottom label of the router.

Visual Representation: A mobile device screen shows a Wi-Fi network list with "GL-X3000-xxx" selected, and a password input field.

Connect via LAN

Plug a network cable connecting your computer into the LAN port on the router.

Diagram Description: The diagram shows a network cable connecting a computer to the router's LAN port.

3. Set Up Router

Visit https://192.168.8.1 in your web browser to set up your router. You will start by choosing your preferred language.

Visual Representation: A browser address bar shows "https://192.168.8.1".

Router Overview

Ports and Slots

The router features the following ports and slots:

4G/5G Antennas (x2)
Wi-Fi Antennas (x2)
Power port ?
WAN Ethernet port
USB 2.0 port
LAN Ethernet port
TF Card Slot ?
Nano-SIM Card Slots ?

Diagram Description: A diagram illustrates the rear and side view of the router, labeling each port and slot: 4G/5G Antennas, Wi-Fi Antennas, Power port, WAN Ethernet port, USB 2.0 port, LAN Ethernet port, TF Card Slot, and Nano-SIM Card Slots.

Status Lights

The router has indicator lights for:

Power
5G Wi-Fi
2G Wi-Fi
Internet

Repair / Reset

If you encounter issues accessing the web-based setup page or connecting to the router, you can use the Reset button:

Press and hold the Reset button for 3 seconds, then release to repair your network.
Press and hold the Reset button for 10 seconds, then release to reset the router to factory settings. All user data will be cleared.

Technical Supports

For more detailed and updated instructions, please visit the official GL-iNet documentation website:

https://docs.gl-inet.com/en/4/

For further questions and assistance, you can reach out through the following channels:

You may also seek help from professionals on other relevant websites, such as those related to OpenWrt or LEDE.

Warranty & Compliance

Warranty Information

GL Technologies (Hong Kong) Limited provides a one-year limited warranty for routers and a three-month limited warranty for accessories. Additional warranty coverage may apply based on local laws.

Important Notes:

Use of the included 12V/2.5A power adapter is highly recommended.
Damage caused by failure to follow instructions, modifying the PCBA or components, or inappropriate use (e.g., incorrect voltage, high temperature, water damage, dropping) will void the warranty.
Issues arising from the use of third-party firmware may not receive official support.
Product images are for reference only; specifications are subject to change without notice.

Regulatory Compliance

FCC ID: 2AFIW-X3000NR | 2AFIW-X3000C16

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: it must not cause harmful interference, and it must accept any interference received.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits for an uncontrolled environment. Installation and operation should maintain a minimum distance of 20cm between the radiator and your body.

IC Compliance: This device complies with Innovation, Science and Economic Development Canada's license-exempt RSS standards. Operation is subject to two conditions: it must not cause interference, and it must accept any interference.

IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure limits for an uncontrolled environment. Installation and operation should maintain a minimum distance of 20cm between the radiator and your body.

EU Declaration of Conformity: GL Technologies (Hong Kong) Limited declares that the radio equipment type [5G NR Wi-Fi 6 Router, GL-X3000NR / 4G LTE Wi-Fi 6 Router, GL-X3000C16] complies with Directive 2014/53/EU. The full text is available at: https://www.gl-inet.com/products/certificate

Frequency Bands: 2.4G WIFI: 2.412-2.472GHz; 5G WIFI: 5.15-5.25GHz, 5.25-5.35GHz, 5.47-5.725GHz, 5.725-5.85GHz.

Maximum Output Power: 2.4G WiFi 19.77dBm; 5G WiFi 21.46dBm.

Power Supply: ICP30A-120-2500 (refer to user instructions for applicable power supplies).

Restrictions for 5GHz Band: Operation in the 5150-5350 MHz band is restricted to indoor use within all European Union countries to reduce potential interference with co-channel mobile satellite systems. For devices with detachable antennas, maximum antenna gain limits apply for bands 5250-5350 MHz, 5470-5725 MHz, and 5725-5850 MHz to ensure compliance with e.i.r.p. limits.

	GL-iNet Mudi Portable 4G LTE Router Setup and Support Guide Comprehensive guide for setting up the GL-iNet Mudi Portable 4G LTE Router (GL-E750V2C4/GL-E750V2C6), including Wi-Fi and LAN connection instructions, support resources, and warranty information.
	GL-X3000 Spitz AX Wi-Fi 6 Cellular Router Datasheet Datasheet for the GL-X3000 Spitz AX, a Wi-Fi 6 4G/5G Cellular Router offering high-speed internet with advanced features like SD-WAN, high-speed VPN, and a secured network.
	GL-iNet m519 5G WiFi 6 Router User Guide Quick start guide for the GL-iNet m519 5G WiFi 6 Router, detailing setup, Wi-Fi and LAN connection, and advanced settings access.
	GLiNet Beryl AX (GL-MT3000) WiFi 6 Router Quick Start Guide and Warranty Get started with your GLiNet Beryl AX (GL-MT3000) WiFi 6 Router. This guide covers setup, support, and warranty information for the AX3000 router.
	GL-iNet MA-B256 Maui Smart Router User Guide: Wireless, VPN Server & Client Setup Comprehensive user guide for the GL-iNet MA-B256 Maui Smart Router, covering wireless settings, VPN server configuration, VPN client setup, and troubleshooting. Learn how to connect and optimize your router for various network needs.
	GL-AXT1800 / Slate AX AXT1800 Wireless Router Setup Guide A concise guide to setting up and understanding the GL-AXT1800 / Slate AX AXT1800 Wireless Router, including connection instructions, support information, and warranty details.
	GL-AP1300 AC1300 Wireless Access Point Setup Guide A concise guide to setting up the GL-AP1300 AC1300 Wireless Access Point, including power options, Wi-Fi connection, router setup, and support information.