Setting Up Your GL-MT3000 / Beryl AX Router
Follow these steps to get your GLiNet Beryl AX (AX3000 WiFi 6 Router) up and running.
Step 1: Power On
When powered up, your router will broadcast both 2.4G and 5G Wi-Fi signals with the SSIDs: GL-MT3000-xxx and GL-MT3000-xxx-5G. A solid white light indicates the router is working well.
Connect the power cable to the router's power port.
Step 2: Connect via Wi-Fi
You can connect to the router's Wi-Fi network in two ways:
- Scan QR Code: Scan the QR code printed on the bottom of the router to connect.
- Manual Connection: Manually search for and connect to the SSID "GL-MT3000-xxx". Then, enter the default password printed on the router.
Example Wi-Fi connection interface:
Step 3: Connect via LAN
Alternatively, connect your computer to the router using an Ethernet cable plugged into the LAN port.
Step 4: Set Up Router
Open a web browser on your connected computer and navigate to http://192.168.8.1. You will be prompted to set up your router, starting by choosing your preferred language.
Support and Warranty Information
Router Ports and Buttons
Repair / Reset Instructions
If you encounter issues accessing the web-based setup page or connecting to the router, you can use the Reset button:
- Repair Network: Press and hold the Reset button for 3 seconds, then release. The indicator light will turn blue and flash slowly until your network recovers.
- Factory Reset: Press and hold the Reset button for 10 seconds, then release. The indicator light will turn blue and flash rapidly. All data will be cleared when the light becomes solid blue.
Technical Support
For detailed and updated instructions, visit our website:
- https://docs.gl-inet.com/en/4/
- For further questions, you can get help through the following channels:
- Email: support@gl-inet.com
- Facebook: facebook.com/gl.inet.wifi/
- Forum: forum.gl-inet.com
- Ask professionals in other forums, e.g., OpenWrt, LEDE, or other professional websites.
Warranty Information
GLiNet provides a one-year limited warranty for routers and a three-month limited warranty for accessories. Additional warranty terms may apply according to local law.
- It is highly recommended to use the included 5V/3A power adapter.
- This warranty is void if any damage to the router is caused by not following instructions, modifying the PCBA, components, or case, using third-party firmware, or inappropriate use (e.g., incorrect voltage input, high temperature, dropping, or immersion in water).
- Product images in the instructions are for reference only. GLiNet reserves the right to change or modify materials without prior notice.
Regulatory Compliance
FCC ID: 2AFIW-MT3000
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Industry Canada Compliance: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Usage Restrictions: Devices operating in the 5150-5250 MHz band are for indoor use only to reduce the potential for harmful interference to co-channel mobile satellite systems. Functions of Wireless Access Systems including Radio Local Area Networks (WAS/RLANs) within the band 5150-5350 MHz are restricted to indoor use only within all European Union countries.
EU Declaration of Conformity: GL TECHNOLOGIES (HONG KONG) LIMITED declares that the radio equipment type [AX3000 WiFi 6 Router, GL-MT3000] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://www.gl-inet.com/products/certificate.
Frequency Bands: 2.4G WIFI: 2.412-2.472GHz; 5G WIFI: 5.15-5.25GHz, 5.25-5.35GHz, 5.47-5.725GHz, 5.725-5.85GHz.
Maximum Output Power: 2.4GHz WIFI 20dBm, 5GHz WIFI 22dBm.
Company Information
Hong Kong Office: GL Technologies (Hong Kong) Limited, Unit 203, 2/F, Building 19W, 19 Science Park West Avenue, Hong Kong Science Park, Pak Shek Kok, N.T., Hong Kong.
Shenzhen Office: Shenzhen Guanglianzhitong Tech Co., Ltd., Room 305-306, Skyworth Digital Building, Shiyan Street, Baoan District, Shenzhen, China, 518000. (+86-0755-86606126)
Certifications: FCC, ICCE, ROHS, UKCA.
