Rev-A-Shelf 6" 432 Wall Filler
This document provides detailed specifications and dimensional data for the Rev-A-Shelf 6" 432 Wall Filler, a cabinet accessory designed to maximize storage and organization.
Product Overview
The Rev-A-Shelf 432 Wall Filler is a pullout cabinet organizer designed to fit into standard kitchen cabinets. It features adjustable shelves and a robust construction for holding various items.
Model Specifications and Dimensions
The 432 Wall Filler series is available in multiple heights (L1) to accommodate different cabinet sizes. The core unit has a fixed width and depth.
Overall Dimensions:
- Width: 6.00 inches [152.40 mm]
- Depth: 11.13 inches [282.58 mm]
Key Internal Dimensions and Features:
- Pullout Frame Width: 5.75 inches [146.05 mm]
- Rail to Rail Distance: 5.12 inches [130.15 mm]
- Adjustment Increment for shelves: 0.75 inches [19.05 mm]
- Small Diameter (mounting point): 0.25 inches [6.35 mm]
- Bottom Clearance: 0.50 inches [12.70 mm]
Model Variations and Shelf Configuration:
The following table details the different models based on their overall height (L1) and the number of shelves provided:
| Part Number | Height (L1) [mm] | Internal Height (L2) [mm] | Depth (L3) [mm] | Number of Shelves |
|---|---|---|---|---|
| 432-WF-6C | 30.00 [762] | 20.81 [528.6] | 4.82 [122.3] | 4 (3 adjustable) |
| 432-WF33-6C | 33.00 [838.2] | 23.31 [592] | 5.31 [134.9] | 5 (4 adjustable) |
| 432-WF36-6C | 36.00 [914.4] | 26.81 [680.9] | 5.31 [134.9] | 5 (4 adjustable) |
| 432-WF39-6C | 39.00 [990.6] | 29.31 [744.5] | 5.31 [134.9] | 6 (5 adjustable) |
| 432-WF42-6C | 42.00 [1066.8] | 32.31 [820.7] | 5.31 [134.9] | 6 (5 adjustable) |
Slide and Performance Specifications
The unit is equipped with full-extension slides for smooth operation.
Slide Details:
- Slide Type: Not specified
- Slide Closing: Not specified
- Slide Mounting: Not specified
- Ball Bearing: Not specified
- Slide Extension: Full
- Slide Length: 267 MM
- Slide Finish: Zinc
Product Weight Rating:
- Maximum Weight Rating: 100 LB (per BMHA Standards)
Installation Note:
This product is designed to install between two cabinets.
Technical Notes and Tolerances
All dimensions and specifications are subject to the following tolerances:
- Wood components: +/- 0.03 inches [0.8mm] for dimensions specified as .XX
- Other components: +/- 0.02 inches [0.5mm] for dimensions specified as .XX
- All dimensions specified as .XXX: +/- 0.005 inches [0.13 mm]
- Fractions: +/- 1/32 inches [0.8 mm]
- Angles: +/- 1/2°
The drawing follows First Angle Projection standards. The drawing scale is 1:4.
This document is proprietary and confidential to Rev-A-Shelf LLC.
