Behringer PK108/110/112/115 Quick Start Guide

Important Safety Instructions

Terminals marked with this symbol ⚡ carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.

This symbol ⚠️, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure - voltage that may be sufficient to constitute a risk of shock.

This symbol ?, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.

Caution:

To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside. Refer servicing to qualified personnel.

Caution:

To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Caution:

These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.

General Safety Guidelines:

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Use only attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
16. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
17. Correct disposal of this product: This symbol ♻️ indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.
18. Do not install in a confined space, such as a book case or similar unit.
19. Do not place naked flame sources, such as lighted candles, on the apparatus.
20. Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed-of at a battery collection point.
21. Use this apparatus in tropical and/or moderate climates.

LEGAL DISCLAIMER

Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Auratone and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2020 All rights reserved.

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding Music Tribe's Limited Warranty, please see complete details online at musictribe.com/warranty.

Controls

1. INPUT

Use speaker cables with speakON-style twist-locking professional connectors to connect the speaker to the power amplifier. Insert the twist-locking connector into the jack and rotate clockwise until the connector locks into place. These speakers connect to power via pins 1+ and 1- in the twist-locking connector. Pins 2+ and 2- are not connected internally to the speakers but are wired through to the LINK OUTPUT.

Professional speaker connector (compatible with Neutrik Speakon connectors)

Pinout (Front View): 1+ (Input), 1- (Input), 2+ (Link Output), 2- (Link Output)

Pinout (Rear View): 1+ (Input), 1- (Input), 2+ (Link Output), 2- (Link Output)

2. LINK OUTPUT

Use this connection to feed the INPUT signal on pins 1+ and 1- through and out in order to power an additional speaker with the same signal. Alternately, by running a 4-pole speaker from the power amp to the INPUT jack, an additional power amp channel on pins 2+ and 2- can be fed straight through to the LINK OUTPUT to feed an additional speaker with a separate signal. This alternate method can be useful for consolidating your speaker cables when necessary. Check to make sure your power amplifier can combine and send out all pins (1+, 1-, 2+ and 2-) from a single output jack.

3. SYSTEM SPECIFICATION

Refer to this section of the back panel to find the power rating for your specific speaker model.

Specifications

System Data	PK108	PK110	PK112	PK115
Peak power	350 W	500 W	600 W	800 W
Impedance	8 Ω	8 Ω	8 Ω	8 Ω
Type	2-way	2-way	2-way	2-way
Frequency response	87 Hz to 35 kHz (±3 dB)	80 Hz to 35 kHz (±3 dB)	75 Hz to 35 kHz (±3 dB)	70 Hz to 35 kHz (±3 dB)
Sound pressure level (SPL)	96 dB (full space, 1 W @ 1 m)	96 dB (full space, 1 W @ 1 m)	96 dB (full space, 1 W @ 1 m)	96 dB (full space, 1 W @ 1 m)
Nominal dispersion	70° H x 50° W	70° H x 50° W	70° H x 50° W	70° H x 50° W
Crossover frequency	2.2 kHz	2.2 kHz	2.2 kHz	2.2 kHz
Rigging fittings	Ergonomically shaped handle, 35 mm pole socket	Ergonomically shaped handle, 35 mm pole socket	Ergonomically shaped handle, 35 mm pole socket	Ergonomically shaped handle, 35 mm pole socket
Components: Tweeter	1" compression driver	1" compression driver	1" compression driver	1" compression driver
Components: Woofer	8" (203 mm)	10" (254 mm)	12" (305 mm)	15" (381 mm)
Connectors	2 x Speaker Twist Connectors	2 x Speaker Twist Connectors	2 x Speaker Twist Connectors	2 x Speaker Twist Connectors
Wiring	4 pins: Pins 1+ / 1- input, Pins 2+ / 2- link	4 pins: Pins 1+ / 1- input, Pins 2+ / 2- link	4 pins: Pins 1+ / 1- input, Pins 2+ / 2- link	4 pins: Pins 1+ / 1- input, Pins 2+ / 2- link
Dimensions (H x W x D)	395 x 254 x 211 mm (15.6 x 10 x 8.3")	491 x 315 x 261 mm (19.3 x 12.4 x 10.3")	583 x 375 x 308 mm (23 x 14.8 x 12.1")	685 x 433 x 366 mm (27 x 17 x 14.4")
Weight	5.1 kg (11.2 lbs)	7.2 kg (15.8 lbs)	10.1 kg (22.2 lbs)	14.9 kg (32.8 lbs)

Other Important Information

Registration and Support

Register online: Please register your new Music Tribe equipment right after you purchase it by visiting behringer.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
Malfunction: Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulfiller for your country listed under "Support" at behringer.com. Should your country not be listed, please check if your problem can be dealt with by our "Online Support" which may also be found under "Support" at behringer.com. Alternatively, please submit an online warranty claim at behringer.com BEFORE returning the product.
Power Connections: Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION

Responsible Party Name: Music Tribe Commercial NV Inc.

Address: 901 Grier Drive, Las Vegas, NV 89118 USA

Phone Number: +1 702 800 8290

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Important information: Changes or modifications to the equipment not expressly approved by Music Tribe can void the user's authority to use the equipment.

	Behringer DR115DSP/DR112DSP/DR110DSP Quick Start Guide Quick start guide for Behringer DR115DSP, DR112DSP, and DR110DSP active PA speaker systems. Covers setup, controls, DSP functions, safety information, and technical specifications.
	Behringer PK108A/PK110A Active PA Speaker System Quick Start Guide Get started quickly with the Behringer PK108A and PK110A active PA speaker systems. This guide covers setup, controls, media player, Bluetooth connectivity, and essential safety information.
	Behringer EUROLIVE B205D Ultra-Compact 150-Watt PA/Monitor Speaker System Quick Start Guide Get started quickly with the Behringer EUROLIVE B205D PA/Monitor Speaker System. This guide covers safety, setup, controls, specifications, and FCC compliance for your ultra-compact 150-watt audio solution.
	Behringer EUROLIVE B115W/B112W Quick Start Guide A comprehensive guide to setting up and operating the Behringer EUROLIVE B115W/B112W Active 2-Way PA Speaker System, including safety instructions, hook-up diagrams, controls explanation, and Bluetooth connectivity.
	Behringer B1X Quick Start Guide: Portable PA Speaker Setup and Operation Get started with your Behringer B1X All-in-One Portable PA Speaker. This guide covers setup, controls, Bluetooth connectivity, app integration, DSP functions, and specifications for this 250-watt speaker with digital mixer and effects.
	Behringer EUROLIVE F1220D Quick Start Guide Get started quickly with the Behringer EUROLIVE F1220D Bi-Amped 250-Watt Monitor Speaker System. This guide covers essential safety, setup, controls, specifications, and important information for optimal use.
	Behringer EUROLIVE B205D: Ultra-Compact 150W PA/Monitor Speaker Quick Start Guide Get started quickly with the Behringer EUROLIVE B205D ultra-compact 150W PA/Monitor Speaker System. This guide covers essential safety information, hook-up procedures, control descriptions, and technical specifications.
	Behringer EUROLIVE B115MP3/B112MP3 PA Speaker System Quick Start Guide Comprehensive quick start guide for the Behringer EUROLIVE B115MP3/B112MP3 active PA speaker system. Covers safety instructions, hook-up diagrams, control descriptions, getting started steps, and specifications. Features include a 1000W amplifier, MP3 player, and wireless option.

Quick Start Guide