Cersanit PRESTO Flush Button Installation Guide
This document provides instructions for the assembly and use of the Cersanit PRESTO flush button.
Product Overview
The Cersanit PRESTO flush button is designed for easy installation and operation. The package includes the flush button, mounting hardware, and instructions.
Included Components:
- Flush button mechanism
- Mounting screws (2x)
- Wall anchors (2x)
- Adjustable rods (2x)
- Fasteners (4x)
The product is compatible with Cersanit Carina S-MZ-CARINA-XL installations.
Installation Instructions
Follow these steps for proper installation:
-
Step 1: Prepare the Mounting Frame
Attach the adjustable rods to the mounting frame. Ensure the rods are extended to a length of x + 70 mm, where 'x' is the depth of the wall cavity. Secure the rods with the provided fasteners.
-
Step 2: Mount the Frame to the Wall
Position the mounting frame against the wall. Use a spirit level to ensure it is straight (90 degrees). Insert the wall anchors into the wall and secure the frame using the mounting screws. The screws should be tightened to 11-13 mm from the surface.
-
Step 3: Install the Flush Mechanism
Insert the flush mechanism into the designated slots within the mounting frame. Ensure it is seated correctly. The depth of the mechanism should be approximately 33 mm from the front of the frame.
-
Step 4: Attach the Flush Button Plate
Align the flush button plate with the mounting frame. Slide the plate onto the frame, ensuring it clicks into place. The flush button mechanism should now be accessible through the plate.
Usage Instructions
To flush, press the buttons on the Cersanit PRESTO flush plate. The dual-flush system allows for water-saving options.
Maintenance
Regular cleaning with a soft, damp cloth is recommended. Avoid abrasive cleaners.
Support and Information
For further assistance or to purchase related products, visit TM.by Internet-магазин.
