Cersanit Crea Square Wall-Hung Toilet: Installation and Operation Manual

Product Overview

The Cersanit Crea Square wall-hung toilet offers a modern and space-saving solution for bathrooms. This manual covers the complete installation process, from mounting the frame to connecting the water supply and drainage.

Package Contents and Components

The installation kit typically includes the wall-hung toilet bowl, a concealed cistern frame (Cersanit Vector), flushing mechanism, mounting hardware, and drainage connections. Refer to the diagrams for specific part identification (labeled A, B, C, etc.).

Installation Instructions

Step 1: Mounting the Frame

1A: Position the concealed cistern frame against the wall at the desired height. Ensure it is level. The manual indicates two possible mounting heights: 180 mm and 230 mm from the floor to the bottom of the cistern.

1B: Secure the frame to the wall using the provided mounting hardware. The diagrams show the use of screws and wall plugs appropriate for solid walls.

Step 2: Connecting Drainage

2A: Attach the drainage outlet pipe to the toilet bowl and the wall connection. Ensure a secure and watertight seal.

2B: Connect the cistern to the water supply. The diagrams illustrate the connection points and the need for appropriate fittings.

Step 3: Water Supply Connection

3A: Connect the inlet pipe to the cistern's water supply valve. Ensure the connection is tight to prevent leaks.

Step 4: Toilet Bowl Mounting

4A: Mount the toilet bowl onto the frame. The diagrams show how to align the bowl with the cistern and secure it using the provided bolts.

4B: Ensure the toilet bowl is stable and level before proceeding.

Step 5: Flushing Mechanism Installation

5A: Install the flushing mechanism components into the cistern as per the diagrams. This typically involves connecting the flush valve and the fill valve.

Step 6: Wall Mounting Plate Installation

6A: Attach the wall mounting plate to the wall. This plate will support the toilet bowl and cistern.

6B: Use a spirit level to ensure the plate is perfectly horizontal and vertical.

Step 7: Final Connections and Testing

7A: Connect the flush pipe between the cistern and the toilet bowl.

7B: Connect the water supply line to the cistern inlet.

7C: Test the flushing mechanism. Ensure water fills the cistern correctly and the flush operates smoothly.

Step 8: Securing the Toilet Bowl

8A: Secure the toilet bowl to the mounting plate using the provided bolts. Ensure they are tightened appropriately.

Step 9: Water Level Adjustment

9A: Adjust the water level in the cistern if necessary. The diagrams show how to adjust the fill valve to achieve the correct water level.

Step 10: Cistern Cover Installation

10A: Place the cistern cover onto the cistern.

Step 11: Flush Plate Installation

11A: Install the flush plate. The diagram shows the required clearance (A = Z + 15 mm) and minimum distance (15 mm) from the wall.

Step 12: Final Wall Mounting

12A: Ensure the entire unit is securely fixed to the wall.

Step 13: Connecting the Cistern to the Toilet Bowl

13A: Connect the flush pipe from the cistern to the toilet bowl inlet.

Step 14: Water Inlet Connection

14A: Connect the water supply to the cistern inlet valve.

Step 15: Cistern Unit Mounting

15A: Mount the cistern unit to the wall frame.

Step 16: Toilet Bowl Attachment

16A: Attach the toilet bowl to the wall mounting system.

Step 17: Sealing and Final Check

17A: Apply sealant (Герметик) around the base of the toilet bowl where it meets the wall for a watertight seal.

17B: Allow 24 hours for the sealant to cure before use.

Operation and Maintenance

The Cersanit Crea Square toilet is designed for efficient and reliable operation. Regular cleaning with mild detergents is recommended. Avoid abrasive cleaners that could damage the ceramic surface.

For any issues, refer to the troubleshooting section of the full manual or contact Cersanit customer support.