VIKING SKADI III Power Bank

Welcome

Thank you for choosing a VIKING product. Please refer to the technical specifications of each model, which can be found in the user manual or on the website www.best-power.cz.

Method of Use

• Before first use, ensure the power bank is fully charged. Capacity and charging status are indicated by LEDs near the ON/OFF button.
• Charging time is for information only and may vary based on the charging source power.
• Specifications, appearance, and descriptions are subject to change due to product improvements and updates.
• Always use a suitable charging cable.
• Slight warming of the product during prolonged use is normal.
• Keep away from heat and moisture.

Charging Other Devices

Connect the device to be charged using a cable with a suitable connector to the power bank's output port (2x USB-A, 1x USB-C, 1x DC5525).

Multiple devices can be charged simultaneously using two or all ports, but fast charging is not supported for any output in this mode.

Charging starts automatically.

Press the ON/OFF button to manually turn the power bank off or on.

Using a suitable cable with an Apple Lightning connector, you can also charge Apple products.

The power bank features an auto-start function when plugged in.

The power bank supports PD60-65W fast charging technology.

Charging the Power Bank from an External Power Source

Connect the included USB-C cable to a power source, such as your phone's power adapter. Minimum charging voltage is 5V/3.0A.

Wireless Charging

Turn on the power bank using the ON/OFF button and place the device you wish to charge onto the wireless output area.

Note: The device you intend to charge must support wireless charging.

LED Flashlight

To turn on: Press and hold the ON/OFF button until the LED light illuminates. Subsequent short presses cycle through light modes:

• 1. Steady full light
• 2. Strobe
• 3. SOS flash (Morse code)

To turn off: Press and hold the ON/OFF button until the LED light goes out.

Product Description

The VIKING SKADI III power bank is a robust portable charging device designed for various needs. It features multiple output ports for charging different devices and an integrated LED flashlight.

Key Features and Components:

• 1. USB-A1 Output: Standard USB-A port for charging devices.
• 2. USB-A2 Output: Second standard USB-A port.
• 3. DC5525 Output: A DC barrel jack output port.
• 4. USB-C Input/Output: Versatile port for both charging the power bank and charging other devices.
• 5. LED Light: Integrated flashlight with multiple modes (steady, strobe, SOS).
• 6. Hook for hanging: A sturdy hook for attaching the power bank to bags or gear.
• 7. Battery Capacity Status LEDs: Indicators showing the remaining battery charge.
• 8. "ON/OFF" Button: Used to power the device on/off and control the LED flashlight.
• 9. Wireless Charging: An integrated pad for wirelessly charging compatible devices.

Visual Representation of Ports and Controls:

The device is depicted with its front, back, and side views. The front shows a rugged design with a central hexagonal pattern. The top edge has a hook. The bottom edge displays the various output ports. The side views clearly show the arrangement of the USB-A, USB-C, and DC5525 ports. The top surface includes the ON/OFF button and LED status indicators.

Package Contents

• VIKING Power Bank
• USB-C Charging Cable

Warnings and Declarations

• Do not disassemble the device or its accessories.
• Do not modify, disassemble, open, puncture, remove, or otherwise tamper with the rechargeable battery inside the device.
• Protect from fire, prolonged direct sunlight, and other heat sources to prevent overheating and damage to the device, including the internal battery.
• Protect from contact with water and wet objects, especially during use.
• Keep away from high-voltage equipment.
• Do not throw or shake the device.
• Do not use chemical cleaning agents to clean the device.
• This equipment is not intended for use by persons (including children) with physical, sensory, or mental disabilities, or lack of experience or knowledge, that would prevent safe operation.
• When the device is not in use, secure unused sockets with safety plugs if available.
• Immediately stop using the device if it is damaged in any way.
• For safety reasons, use only the original charger and cables designed for this device.
• In case of ignition, do not use a water extinguisher! A dry powder extinguisher is suitable if necessary.
• This product is intended for emergency power supply of electrical appliances only. It is not a substitute for the permanent DC or AC power supply of household appliances.
• This device is designed for powering Class II (double insulated) appliances.
• Altering, damaging, or obscuring the logo and nameplate on the equipment is strictly prohibited.
• When installing the device (if applicable), use appropriate tools to tighten all screws.
• It is strictly forbidden to operate under voltage during installation (if applicable).

Protect from children! Ignoring these safety instructions may result in fire, electric shock, or damage to the equipment.

Recycling

Do not dispose of the product or batteries as unsorted municipal waste at the end of their life. Use sorted waste collection points. For more information on recycling this product, contact your local municipality, household waste management organization, or the point of sale where you purchased the product.

Warranty and Liability

Liability for product defects is 24 months according to the Czech Republic Act No. 634/1992 Coll. on Consumer Protection.

Battery life is 6 months, meaning that under normal and proper use, the battery's actual (rated) power will not drop below 80%.

LED lifetime is 6 months, meaning that under normal and proper use of the LED lights, at least 80% of the total number of LEDs in the device are guaranteed to be lit.

The seller's claim for liability for defects is extinguished in the event of:

• Damage due to improper use or use of the equipment in unsuitable conditions.
• Failure to comply with the technical specifications and instructions for use of the equipment.
• Attempts by the user to repair, assemble, or dismantle the equipment in an unprofessional manner.
• Damage to the equipment or any part thereof due to natural elements (e.g., lightning, water, mechanical damage).
• Damage to the equipment or any part thereof due to unprofessional handling.

Specifications

Distributor Information

The VIKING and TOPDON brands are distributed by BONA SPES s.r.o.

Řepčín 250, Olomouc 77900, Czechia

Company ID (IČO): 03476774, Tax ID (DIČ): CZ03476774, VAT No.: 03476774

Phone: +420 777 109 009

Website: www.best-power.cz

Email: info@best-power.cz