VIKING HFT-160-45 Jump Starter & Power Bank User Manual

Product Overview

The VIKING HFT-160-45 is a versatile Jump Starter & Power Bank designed for jump-starting 12V vehicles and charging various electronic devices. It also features different lighting modes.

Features:

• Jump start a car
• Charge PSP, mobile phones, tablets, cameras, and other electronics
• Outdoor travel flashlight with SOS and strobe modes

How to Jump Start a 12V Vehicle

1. Ensure the Jump Starter is charged to over 50%.
2. Insert the jumper cable into the product's jump start socket. The GREEN LED on the jumper cable will flash, indicating 'Stand-by mode'.
3. Connect the RED clamp to the POSITIVE (+) terminal and the BLACK clamp to the NEGATIVE (-) terminal of the vehicle battery. The Jumper cable's LED will turn solid GREEN, indicating 'Jump Start Ready mode'.
4. You have 120 seconds to start the engine once in 'Jump Start Ready mode'.
5. Press the car's start button or turn the ignition switch to START.
6. After starting the car, disconnect the jumper cable from the product and then remove the clamps from the vehicle battery.

Jumper Cable LED Indicators:

LCD Screen Display Instructions

• Charging: The LCD displays 'IN', and the battery percentage flashes (1 flash per second). Charging stops at 100%, and the display turns off after 10 seconds.
• Discharging: The LCD displays 'OUT' along with the current power percentage.
• USB Output: Displays '5V/2.4A' or 'QC 3.0'.
• Type-C Output: Displays '5V/3.0A'.
• Wireless Charging: The '((()))' symbol indicates status; it flashes quickly if abnormal.
• The jump start port discharge indicates the electric quantity.
• The LED screen turns off after 30±5 seconds of no load or light load.
• The ' ' symbol flashes if the battery temperature is abnormal.

How to Use Wireless Charging

1. Press the 'Power' button to turn on the wireless feature; the '((()))' symbol will be solid on.
2. Place your phone over the wireless charger pad.

How to Charge a Mobile Phone or Tablet

1. Turn on the product.
2. Connect the product to your device using a charging cable.

How to Turn on the LED Light

• Hold for 2 seconds: Turn on the LED light.
• Short press once: Switch to SOS or flash light mode.
• Hold for 2 seconds: Turn off the LED light.

How to Recharge the Product

1. First step: Insert the charging cable.
2. Second step: Connect the charging cable to a DC 5V/3A USB port.

Product Structure Diagram

The product has the following components:

• ① Power button
• ② LCD screen
• ③ Jump start port
• ④ LED light / SOS / strobe
• ⑤ Type-C input/output
• ⑥ USB output
• ⑦ Wireless charging

Specifications

• Model: HFT-160-45
• Capacity: 59.2Wh
• Dimension: 198 x 92 x 40 mm
• Input/Output: 5V/3A
• Output 1: 5V/2.4A
• Output 2: 5V/3A; 9V/2A; 12V/1.5A
• Wireless Output: 10W
• Start Current: 1000A
• Peak Current: 2000A
• Lifespan: 1000 times
• Operating Temperature: -10°C to 50°C

What's in the Box?

• Jump Starter
• Jumper Cable
• USB Charging Cable
• Car Charger
• Wall Charger
• Zipper Carry Case
• User Manual
• Warranty Card

Warnings

• This product is designed for 12V lead acid/AGM/Gel batteries/vehicles ONLY.
• Never short circuit the jump starter by connecting the RED and Black clamps.
• Do not disassemble the jump starter.
• Do not use it as a toy for children.
• Store in a dry place, away from damp conditions or corrosive materials.
• If the jump starter expands, leaks, or emits a peculiar smell, stop use immediately.
• Use the jump starter at normal temperatures, away from excessive moisture, heat, and fire.
• Do not jump start the car engine more than 3 times continuously within a 60-second interval to prevent overheating or damage.
• Do not use the jump starter if the battery power is less than 10% to avoid damage.
• Recharge the unit every 3 months to prevent over-discharge.
• Charge for at least 3 hours before first use.
• After starting the car, wait at least 30 minutes before charging the product.
• Always use the standard jumper cable provided with the product to start the vehicle.

Warranty Card

Guangdong Boltpower Energy Co.,Ltd offers a 12-month warranty service from the date of purchase for quality problems under normal use. Please present this warranty card when requesting service. Damage due to operational errors, unauthorized disassembly, or torn product labels will void the warranty. Maintenance services are available for non-warranted issues at the customer's expense.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirements.