Hama USB-C Multiport Hub
Operating Instructions
Product Overview
This Hama USB-C Multiport Hub expands the connectivity options of your notebook or MacBook. It features a USB-C port for power delivery, LAN/Ethernet for wired network connections, VGA and HDMI™ outputs for external displays, and multiple USB-A ports for peripherals.
Key Ports:
- USB-C: Power only (5-20 V, max. 3 A / 60W)
- LAN/Ethernet: Supports 10/100/1000 Mbps
- VGA: Supports up to 1920x1080 @ 60Hz
- HDMI™: Supports up to 3840x2160 @ 30Hz
- USB-A 3.2 Gen 1: Supports up to 5 Gbps (multiple ports)
1. Package Contents
- USB-C Multiport Hub
- These operating instructions
2. Safety Notes
General Safety:
- Do not attempt to service or repair the product yourself. Leave all service work to qualified experts.
- Do not open the device or continue to operate it if it becomes damaged.
- Do not operate the product outside the specified power limits.
- Do not modify the product in any way, as this voids the warranty.
- Keep this product, like all electrical products, out of the reach of children.
- Use the product only for its intended purpose.
- Protect the product from dirt, moisture, and overheating; use only in a dry environment.
- The product is intended for indoor use only.
- Do not use the product near heaters, other heat sources, or in direct sunlight.
- Do not use the product in moist environments and avoid splashes.
- Do not use the product in areas where electronic devices are prohibited.
- Do not drop the product or expose it to major shocks.
- Dispose of packaging material immediately according to locally applicable regulations.
Warning:
- Determine the maximum output current capacity of the USB port on your device (consult the operating instructions or manufacturer). Common values are 500 mA for USB-A 2.0, 900 mA for USB-A 3.0, and up to 3000 mA for USB-C.
- Ensure the cumulative current draw of all connected USB devices does not exceed this value.
Note:
- For optimal performance, connect USB receivers (radio/2.4 GHz wireless) directly to the computer/notebook if possible.
- To use the charging function, the device must support Power Delivery (PD) or Thunderbolt-3/4.
- To use the VGA & HDMI™ function, the device must support DisplayPort Alternate Mode or Thunderbolt-3/4.
- VGA & HDMI™: For simultaneous use of two monitors displaying identical content (Full HD / 1080p).
- For optimal video function, passive monitor adapters/cables (without chipset/signal converter) are recommended.
3. Startup and Operation
- Switch on your computer and ensure the system has fully booted.
- Connect the product to a free USB port on your computer.
- The computer will automatically recognize the product; no driver installation is necessary.
- If required, follow the instructions provided by your operating system.
- Connect your devices to the product one after another to use them.
4. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation, mounting, improper use of the product, or failure to observe the operating instructions and/or safety notes.
5. Technical Data
Specification | Details |
---|---|
Operating voltage / current consumption | 5 – 20 V max. 3 A |
Compatibility | USB-C port |
System requirements | Windows 11 / 10 / 8 / 7, Mac OS 10.8 ≥ |
USB specification | USB 3.2 Gen 1 |
Note: If there is interference or the product no longer responds, unplug the product, wait a few seconds, and then plug it in again.