Hama USB-C Multiport Hub - Operating Instructions
This document provides operating instructions and safety information for the Hama USB-C Multiport Hub (Model: 00200117).
1. Package Contents
The package includes:
- USB-C Multiport
- Operating Instructions
2. Safety Notes
- Do not attempt to service or repair the product yourself. Leave all service work to qualified experts.
- Do not open the device or continue to operate it if it becomes damaged.
- Do not operate the product outside the power limits given in the specifications.
- Do not modify the product in any way, as this voids the warranty.
- Keep this product, like all electrical products, out of the reach of children.
- Use the product only for its intended purpose.
- Protect the product from dirt, moisture, and overheating, and use it only in a dry environment.
- The product is intended for indoor use only.
- Do not use the product near heaters or other heat sources, or in direct sunlight.
- Do not use the product in moist environments and avoid splashes.
- Do not use the product in areas where electronic devices are not permitted.
- Do not drop the product and do not expose it to any major shocks.
- Dispose of packaging material immediately according to locally applicable regulations.
Warning
Determine the maximum output current capacity of the USB port on your device by consulting the operating instructions or contacting the manufacturer. Common values are 500 mA for USB-A 2.0, 900 mA for USB-A 3.0, and up to 3000 mA for USB-C. Ensure that the cumulative current draw of all USB devices connected to the hub/multiport adaptor does not exceed this value.
Note
- If possible, run USB receivers (radio / 2.4 GHz wireless) directly on the computer/notebook.
- To use the charging function, the device must support Power Delivery (PD) or Thunderbolt-3/4.
- To use the HDMI™ function, the device must support DP-Alt mode, Thunderbolt 3/4 or USB4.
- For optimized video function, passive monitor adapters/cables (without chipset/signal converter) are recommended.
3. Startup and Operation
- Switch on your computer and boot the system.
- Connect the product to a free USB port on your computer.
- Drivers are not required; the computer will automatically recognize the product.
- If necessary, follow the instructions for your operating system.
- Plug in your devices one after another to use them.
4. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or failure to observe the operating instructions and/or safety notes.
5. Technical Data
- Operating voltage / current consumption: 5 – 20 V max. 5 A
- Compatibility: USB-C port
- System requirements: Windows 11 / 10 / 8/7, Mac OS 10.8 ≥
- USB specification: USB 3.2 Gen1
Note
If there is interference or the product no longer responds, unplug the product, wait a few seconds, and then plug it in again.
6. Specifications according to Regulation (EU) 2023/826
Information regarding energy consumption can be found at: https://support.hama.com/00200117
Diagram Descriptions
The product features the following ports:
- HDMI™: Supports up to 3840x2160@30Hz.
- USB-A 2.0: Supports up to 480 Mbps.
- USB-A 3.2 Gen1: Supports up to 5 Gbps.
- USB-C PD (Power only): Supports 5-20 V, max. 5 A / 100W.
The product is manufactured by Hama GmbH & Co KG, Monheim, Germany.
For support and service, visit https://support.hama.com/00200117.
