PROAIM SnapRig Professional Kit (RS274) Assembly Manual

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed below.

15mm Baseplate with Quick Release Plate: A baseplate featuring an integrated quick-release mechanism for attaching cameras.
2 x 12" 15mm Aluminium Rods: Two cylindrical aluminum rods, each 12 inches long and 15mm in diameter, used for mounting accessories.
1 x Top Plates: A flat plate designed for mounting accessories on the top of the rig.
15mm Road Clamp Adapter: A clamp designed to attach securely to 15mm rods.
Dovetail Plate: A plate with a dovetail profile, commonly used for camera mounting and balancing.
1x L-Type Allen Keys (Sizes: 4mm): An L-shaped tool with a 4mm tip, used for tightening screws and bolts during assembly.

All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher.

SnapRig Kit Setup

Loosen the knob of the Fluid head (Not Included).[Image: Hands shown loosening a knob on a camera fluid head.]
Then remove the quick-release plate by pushing the push-pin knob on the back of the fluid head (Not Included).[Image: A hand pressing a push-pin knob on a camera fluid head to release the quick-release plate.]
Now attach the quick-release plate by aligning it with the dovetail plate, and then secure the assembly using the bolt with a screw driver.[Image: A quick-release plate being aligned with a dovetail plate and a bolt being tightened with a screwdriver.]
Press the push-pin button of the fluid head and then slide and insert the dovetail plate.[Image: A hand pressing a push-pin button on a camera fluid head while a dovetail plate is slid into place.]
Properly tighten the knob of the Fluid head (Not Included).[Image: Hands shown tightening a knob on a camera fluid head.]

Baseplate with Quick Release Plate Assembly

Loosen the knob of the baseplate with the quick-release plate.[Image: Hands shown loosening a knob on the camera baseplate assembly.]
Push the pin affixed to the dovetail plate, as shown in the image.[Image: A hand pressing a pin on the dovetail plate.]
Then slide and insert the baseplate and secure it by tightening its knob.[Image: The baseplate assembly is shown being slid onto the dovetail plate and its knob being tightened.]
The baseplate has now been properly attached to the dovetail plate.[Image: The assembled baseplate is shown attached to the dovetetail plate, mounted on a tripod head.]
Loosen both the knobs of the baseplate.[Image: Hands shown loosening two knobs on the baseplate.]
Then insert the Aluminum rod into the baseplate.[Image: An aluminum rod is shown being inserted into the baseplate.]

Final Assembly and Camera Mounting

Similarly, follow the same procedure for attaching another Aluminum Rod to the Baseplate.[Image: Two aluminum rods are shown attached to the baseplate.]
Note: The baseplate mounts securely to an ARRI-standard dovetail plate, with safety latches on each end to secure your gear. It easily attaches to a tripod or fluid head via 1/4"-20 and 3/8"-16 mounting threads on the dovetail plate.
Now push the press button of the baseplate and remove the quick-release plate. Attach the quick-release plate to the base of the camera. Mount the FX6 camera (Not Included) by sliding it over the baseplate.[Image: A quick-release plate is removed from the baseplate, attached to a camera, and the camera is slid onto the baseplate.]
The camera mounts onto the quick-release plate, which further mounts the camera onto the 15mm LWS baseplate.

Compatible Camera: Sony FX6 cinema camera

YOUR PROAIM SNAPRIG PROFESSIONAL KIT ALL DRESSED UP AND READY TO GO!

(SHOWN WITH OPTIONAL ACCESSORIES)

Warranty Information

Warranty: PROAIM offers a one-year warranty for its products from the date of purchase. Within this period, PROAIM will repair products without charge for labor or parts. Warranty does not cover transportation costs, nor does it cover products subjected to misuse or accidental damage. Warranty repairs are subject to inspection and evaluation by PROAIM.

Liability: PROAIM is not liable for damage caused by products not supplied by PROAIM, or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than PROAIM's company.

Contact Us: In case of any kind of dissatisfaction, please contact PROAIM immediately. PROAIM promises its utmost support and care until you use the product.

	PROAIM SnapRig Universal DSLR Camera Cage (CG219) Assembly Guide Step-by-step assembly instructions and component guide for the PROAIM SnapRig Universal DSLR Camera Cage (CG219), including setup, handle attachment, and slide bar interchange.
	PROAIM P-OHCR-01 Clip-on Overhead Rig Assembly Manual Assembly manual for the PROAIM P-OHCR-01 Clip-on Overhead Rig, detailing setup instructions for DSLR video camera setups with step-by-step guidance and component descriptions.
	PROAIM Offset Slide-Pan Video Film Camera Slider Rig (SL-UBGI-01) Assembly Manual Comprehensive assembly manual for the PROAIM Offset Slide-Pan Video Film Camera Slider Rig (SL-UBGI-01), detailing setup, component installation, and operational functions.
	PROAIM SnapRig V-Lock Assembly Mini Kit for V-Mount Battery CA239 \| Camera Mounting Solution Discover the PROAIM SnapRig V-Lock Assembly Mini Kit (CA239) for V-Mount batteries. This kit includes the V-Lock assembly, screws, and an Allen key for secure camera rig setup.
	Proaim Overhead Camera / Light Modular Studio Rig (P-OHLR-01) Assembly Manual Assembly manual for the Proaim Overhead Camera / Light Modular Studio Rig (P-OHLR-01). Includes a list of contents, instructions for attaching rail sections, end spacers, accessory spacers, and the 3" riser for camera setup. Features warranty and liability information.
	PROAIM Polaris Mini Portable Dolly with Track Ends: Setup Guide and Features A comprehensive guide for the PROAIM Polaris Mini Portable Dolly, detailing its features, components, and step-by-step assembly instructions for camera setups. Includes information on track ends, bowl mounts, and accessories.
	Proaim Orion Mini Camera Geared Head (P-ORGH-MN) Assembly Manual Assembly instructions and setup guide for the Proaim Orion Mini Camera Geared Head (P-ORGH-MN), detailing contents, assembly steps, and product features.
	PROAIM Rocker Camera Plate System (P-RCPL-01) - Setup and Features Guide A comprehensive guide detailing the setup, assembly, and features of the PROAIM Rocker Camera Plate System (P-RCPL-01). Learn how to attach the handle, mount to a dolly, and connect your camera.