iTECHWORLD
THE POWER EXPERT
200W / 300W SOLAR BLANKET KIT
User Guide
Please read this manual carefully before you use your new solar blanket.
Warning & Safety Information
- Do not bend the solar panel cells.
- While in use, keep your solar blanket & controller in a ventilated area and away from any corrosive liquids.
- Keep the solar blanket and controller clean at all times, and regularly check connectors to ensure they're free of grit before plugging them in.
- Do not scratch the solar blanket with sharp objects.
- Do not use the solar blanket to charge non-rechargeable batteries. Doing so may result in harm to the user or damage to the solar blanket and controller.
- Do not put corrosive substances on this solar panel.
- Ensure shade from buildings, trees and other objects does not block sunlight while using the panels.
- Ensure nothing sharp or heavy could potentially break or damage the solar blanket during transport or storage.
- This product is not to be used by children.
Technical Information - 300W Model
| Model | 300W |
| Cell Type | Monocrystalline |
| Solar Cell Lamination | ETFE Raptor Skin |
| Canvas Material | 600D Ballistic Nylon |
| Power Tolerance % | ± 5% |
| Max Power Output (W) | 300W |
| Max Power Voltage (V) | 18.8V |
| Max Power Current (A) | 16A |
| Open Circuit Voltage (V) | 22.44V |
| Short Circuit Current (A) | 17.2A |
| Dimensions (Open) (LxWxH) | 2980x5x680mm |
| Dimensions (Closed) (LxWxH) | 680x50x540mm |
| Operating Temperature | -40°C - 85°C |
| Weight | 6.1KG |
Technical Information - 200W Model
| Model | 200W |
| Cell Type | Monocrystalline |
| Solar Cell Lamination | ETFE Raptor Skin |
| Canvas Material | 600D Ballistic Nylon |
| Power Tolerance % | ± 5% |
| Max Power Output (W) | 200W |
| Max Power Voltage (V) | 18.8V |
| Max Power Current (A) | 10.64A |
| Open Circuit Voltage (V) | 22.44V |
| Short Circuit Current (A) | 12.05A |
| Dimensions (Open) (LxWxH) | 2170x5x590mm |
| Dimensions (Closed) (LxWxH) | 590x38x550mm |
| Operating Temperature | -40°C - 85°C |
| Weight | 2.3KG |
Dimensions
200W Solar Blanket:
Open: 2170mm (Length) x 590mm (Width) x 5mm (Height).
Closed: 590mm (Length) x 550mm (Width) x 38mm (Height).
300W Solar Blanket:
Open: 2980mm (Length) x 680mm (Width) x 5mm (Height).
Closed: 680mm (Length) x 540mm (Width) x 50mm (Height).
Included In The Kit
- Solar Blanket: 1x (Orange, foldable panel with iTechworld branding and '200W SOLAR BLANKET' text)
- Solar Controller: 1x (Black unit with digital display, labeled 'SOLAR CHARGE CONTROLLER 20A 12/24V')
- 5M Extension Lead: 1x (Black cable with grey Anderson-style connectors)
- Battery Clamps: 1x (Red and black alligator clips connected to grey Anderson-style connectors)
How To Use
Connecting Steps
- Extend the solar blanket.
- Fold out the built-in stand.
- Point the solar cells towards the sun at the optimum angle.
- Connect the battery clamps onto your battery.
- Connect the solar controller to your battery using the Anderson plug on the opposite end of the battery clamps.
- Connect the solar blanket to the solar controller using the 5M extension lead if required.
Disconnecting Steps
- Disconnect the solar blanket from the solar controller.
- Disconnect the solar controller from the battery clamps.
- Disconnect the battery clamps from your battery.
- Fold up the solar blanket as shown in the folding steps.
- Store the accessories in the bag on the solar blanket.
Folding Steps
The solar blanket folds in a sequence of six steps. The process involves folding the multi-panel blanket from its extended state into a compact form, with visual cues showing the direction of folds.
Warranty
What Does This Warranty Cover?
Under normal usage conditions, this warranty covers:
- Any defect in design or manufacture which results in the product failing to perform substantially as described in authorized advertising or literature.
- iTechworld will either repair or replace the product at its discretion providing that the fault is found to have been caused by a design or manufacturing defect and not misuse or tampering.
- You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The benefits provided to you as the consumer by this warranty are in addition to other rights and remedies available to you under Australian law.
The Warranty Does Not Cover:
- Any damage resulting from improper use.
- Faulty installation or modification made during installation.
- The cost of removing and re-installing the product.
- Travel and or other expenses due to the customer's remote location.
- Transport charges and damage in transit. It is your responsibility to deliver and pick up your product. Including any costs associated with the postage of your repair or replacement product. If you do freight your product, we recommend that you insure against loss or damage.
- Any loss directly or indirectly associated with the product failing to operate.
- Damage caused by mould, insects, animals, misuse, incorrect operation, adverse weather, accidents and fair wear and tear.
Contact Information
For more information, please visit our website or E-mail:
Website: www.itechworld.com.au
Email: service@itechworld.com.au
Address: 291 Great Eastern Highway Burswood, West Australia 6100
