iTECHWORLD 200W / 300W SOLAR BLANKET KIT
User Guide
[iTECHWORLD Raptor Logo]
Warning & Safety Information
- Do not bend the solar panel cells.
- While in use, keep your solar blanket & controller in a ventilated area and away from any corrosive liquids.
- Keep the solar blanket and controller clean at all times, and regularly check connectors to ensure they're free of grit before plugging them in.
- Do not scratch the solar blanket with sharp objects.
- Do not use the solar blanket to charge non-rechargeable batteries. Doing so may result in harm to the user or damage to the solar blanket and controller.
- Do not put corrosive substances on this solar panel.
- Ensure shade from buildings, trees and other objects does not block sunlight while using the panels.
- Ensure nothing sharp or heavy could potentially break or damage the solar blanket during transport or storage.
- This product is not to be used by children.
Technical Information
300W Model
| Parameter | Value |
|---|---|
| Model | 300W |
| Cell Type | Monocrystalline |
| Solar Cell Lamination | ETFE Raptor Skin |
| Canvas Material | 600D Ballistic Nylon |
| Power Tolerance % | ± 5% |
| Max Power Output (W) | 300W |
| Max Power Voltage (V) | 18.8V |
| Max Power Current (A) | 16A |
| Open Circuit Voltage (V) | 22.44V |
| Short Circuit Current (A) | 17.2A |
| Dimensions (Open) (LxWxH) | 2980x5x680mm |
| Dimensions (Closed) (LxWxH) | 680x50x540mm |
| Operating Temperature | -40°C - 85°C |
| Weight | 11.5KG |
200W Model
| Parameter | Value |
|---|---|
| Model | 200W |
| Cell Type | Monocrystalline |
| Solar Cell Lamination | ETFE Raptor Skin |
| Canvas Material | 600D Ballistic Nylon |
| Power Tolerance % | ± 5% |
| Max Power Output (W) | 200W |
| Max Power Voltage (V) | 18.8V |
| Max Power Current (A) | 10.64A |
| Open Circuit Voltage (V) | 22.44V |
| Short Circuit Current (A) | 12.05A |
| Dimensions (Open) (LxWxH) | 2170x5x590mm |
| Dimensions (Closed) (LxWxH) | 590x38x550mm |
| Operating Temperature | -40°C - 85°C |
| Weight | 7.8KG |
Dimensions
200W Solar Blanket
Open Dimensions: 2170mm (Length) x 590mm (Width) x 5mm (Height). Closed Dimensions: 590mm (Length) x 550mm (Width) x 38mm (Height).
300W Solar Blanket
Open Dimensions: 2980mm (Length) x 680mm (Width) x 5mm (Height). Closed Dimensions: 680mm (Length) x 540mm (Width) x 50mm (Height).
Included In The Kit
- Solar Blanket: 1x [Image of folded orange solar blanket with iTECHWORLD logo and "200W SOLAR BLANKET" text]
- Solar Controller: 1x [Image of a black solar charge controller with display and ports]
- 5M Extension Lead: 1x [Image of a coiled black cable with grey connectors]
- Battery Clamps: 1x [Image of red and black battery clamps connected to a cable]
How To Use
Connecting Steps
- Extend the solar blanket.
- Fold out the built-in stand.
- Point the solar cells towards the sun at the optimum angle.
- Connect the battery clamps onto your battery.
- Connect the solar controller to your battery using the Anderson plug on the opposite end of the battery clamps.
- Connect the solar blanket to the solar controller using the 5M extension lead if required.
Disconnecting Steps
- Disconnect the solar blanket from the solar controller.
- Disconnect the solar controller from the battery clamps.
- Disconnect the battery clamps from your battery.
- Fold up the solar blanket as shown in the folding steps.
- Store the accessories in the bag on the solar blanket.
Folding Steps
Follow these steps to fold the solar blanket for storage:
- Lay the solar blanket flat with the solar cells facing up.
- Fold the blanket in half lengthwise, bringing the two long edges together.
- Fold one of the long folded edges inwards by approximately one-third of the width.
- Fold the other long folded edge inwards to meet the first fold, creating a narrower, multi-layered strip.
- Fold this strip in half or thirds, depending on the desired final size, to create a compact package.
- Secure the folded blanket, often using integrated straps or a carrying bag.
[Visual representation of folding sequence]
Warranty
What Does This Warranty Cover?
- Any defect in design or manufacture which results in the product failing to perform substantially as described in authorized advertising or literature.
- Repair or replacement at iTECHWORLD's discretion if the fault is due to a design or manufacturing defect, not misuse or tampering.
- Entitlement to a replacement or refund for a major failure, and compensation for other reasonably foreseeable loss or damage.
- Entitlement to repair or replacement if goods fail to be of acceptable quality and the failure is not major.
- Benefits provided are in addition to other rights and remedies available under Australian law.
The Warranty Does Not Cover:
- Any damage resulting from improper use.
- Faulty installation or modification made during installation.
- The cost of removing and re-installing the product.
- Travel and other expenses due to the customer's remote location.
- Transport charges and damage in transit. It is the customer's responsibility to deliver and pick up the product for repair or replacement, including postage costs. Insurance against loss or damage during transit is recommended.
- Any loss directly or indirectly associated with the product failing to operate.
- Damage caused by mould, insects, animals, misuse, incorrect operation, adverse weather, accidents, and fair wear and tear.
Contact Information
For more information, please visit our website or E-mail:
291 Great Eastern Highway Burswood, West Australia 6100
