Behringer XD8USB Quick Start Guide

Important Safety Instructions

General Precautions:

• Read and keep all instructions.
• Heed all warnings and follow all instructions.
• Do not expose the unit to rain or moisture.
• Clean only with a dry cloth.
• Do not block ventilation openings.
• Do not install near heat sources.
• Protect the power cord from damage.
• Use only manufacturer-specified accessories.
• Unplug during lightning storms or prolonged periods of non-use.
• Refer servicing to qualified personnel only.
• Ensure proper grounding connections.
• Dispose of the product responsibly according to WEEE directives and local regulations.
• Do not install in confined spaces or place open flames on the unit.
• Be mindful of battery disposal.

Symbols:

• Symbol with lightning bolt: Indicates dangerous voltage.
• Symbol with exclamation mark: Alerts to important operating and maintenance instructions.

Assembly Instructions

Follow these steps to assemble your XD8USB drum kit:

1. Stand Assembly: Assemble the main stand structure using the provided frame, poles, and brackets. Ensure all connections are securely tightened.
2. Cymbal Poles and Drum Brackets: Attach cymbal poles to the stand and secure drum brackets to the poles. Be mindful of any sharp edges on components.
3. Drums and Drum Module: Mount the drum pads (snare, toms, kick) onto the respective brackets. Attach the drum module to the frame using the mounting tube.
4. Cymbals: Attach the crash and ride cymbals to their designated cymbal poles.
5. Kick Drum Stand: Set up the kick drum pedal and connect it to the kick drum pad.
6. Adjustments: Position the drum pads and cymbals for comfortable playing.

Hook-up Diagram

Connect the components as follows:

• Drum Module Connections: Connect the Kick, Snare, Toms (1-3), Crash, Ride, and Hi-Hat pads, along with the Hi-Hat pedal, to the DB25 connector (21) using the provided cable harness.
• Audio Outputs: Connect headphones to the PHONES jack (19). Connect the OUTPUT jack (15) to a mixer or active speaker for external sound.
• External Audio Input: Connect an MP3 player, CD player, or computer audio output to the AUX IN jack (16) to play along with external audio sources.
• Power: Connect the DC IN jack (17) to the supplied AC/DC power adapter, and plug the adapter into a mains socket.
• Computer Connection: Use the USB port (14) to connect to a computer for MIDI data transmission.
• External Equipment: Connect other instruments or audio devices (e.g., microphones, keyboards, guitar modelers) to a mixer for a complete setup.

XD8USB Controls

Familiarize yourself with the drum module controls:

1. VOLUME Knob: Adjusts the master volume for headphone and main outputs.
2. DISPLAY: Shows current KIT, VOICE, PATTERN numbers, TEMPO, and volume. A dot indicates the active mode (KIT, VOICE, or PAT).
3. START/STOP Button: Starts or stops pattern playback or recording.
4. SAVE/RECORD Button: Press once to save a new kit; press and hold to enter recording mode.
5. CLICK Button: Starts or stops the metronome.
6. DRUM OFF Button: Mutes or unmutes the drum track of a pattern.
7. Minus (-) and Plus (+) Buttons: Navigate selections (KITS, VOICES, PATTERNS) and adjust parameters (TEMPO, volume).
8. Pad Select Buttons: Select individual drum pads and cymbals to hear their sounds.
9. TEMPO Button: Adjusts the tempo for patterns or recordings.
10. VOICE Button: Selects different sounds (voices) for each pad/cymbal. Changes can be saved as a new KIT.
11. PAT Button: Selects practice patterns (40 available). Pattern 41 is for user recordings.
12. KIT Button: Selects from 10 preset drum kits or 5 user-saved kits.
13. VOLUME Button: Adjusts the volume for the current KIT, VOICE, or PATTERN.
14. USB: Connects to a computer for MIDI communication.
15. OUTPUT: Line-level output for connecting to mixers or active speakers.
16. AUX IN: 1/8" stereo input for external audio sources.
17. DC IN: Connects to the power adapter.
18. ON/OFF Switch: Powers the drum module on or off.
19. PHONES: 1/8" stereo output for headphones.
20. Mounting Tube: For attaching the module to the drum kit frame.
21. DB25 Connector: Connects to the supplied cable harness.

Playing the XD8USB

Playing Techniques:

• Crash and Ride Cymbals: Play on the Bow (main surface) or Edge (rim) for different sounds.
• Snare Drum: Play on the Head or Rim for distinct tones.
• Toms: Play on the Head.
• Hi-Hat: Offers four options: Open (pedal up), Closed (pedal down), Bow Shot (with pedal open or closed), and Chick (pedal press only).
• Kick Drum: Play on the Head.

Selecting Kits:

• Press the KIT button to cycle through 10 preset kits and 5 user-saved kits (11-15).
• Adjust the volume for each kit using the VOLUME button and +/- buttons.
• Save custom kit settings by pressing SAVE/REC, selecting a user kit number (11-15) with +/-, and pressing SAVE/REC again.

Using Patterns:

• Press the PAT button to select from 40 available practice patterns.
• Adjust pattern volume using the VOLUME button and +/- buttons. Lowering pattern volume can help you hear your own playing better.
• Use the START/STOP button to play or pause patterns.

Recording Your Performance:

• Press and hold SAVE/REC to enter recording mode.
• Select a kit if desired.
• Press START/STOP to begin recording (a few seconds delay).
• Play the drum kit; your performance will be recorded as Pattern 41.
• Press START/STOP again to end the recording.
• To play back your recording, select Pattern 41 using the PAT button and +/- buttons, then press START/STOP.

Metronome (CLICK):

• Press the CLICK button to activate the metronome.
• Adjust the time signature and tempo using the +/- buttons and the TEMPO button.
• Press CLICK again to stop the metronome.

Changing Sounds (VOICE):

• Press the VOICE button to select a different sound for each pad or cymbal.
• Press the desired Pad Select button (8) to choose a sound.
• Use the +/- buttons (7) to cycle through the 123 available sounds.
• Save your custom sound assignments as a new user kit using SAVE/REC.

DRUM OFF:

• Press the DRUM OFF button to mute or unmute the drum track within a selected pattern.

Available Voices and Kits

The XD8USB features 123 distinct sounds and 10 preset kits, with 5 user-saveable slots.

Voices (Examples):

• Kicks: Standard Kick 1-2, Rock Kick 1-2, Power Kick, Vintage Kick, Metal Kick, Jungle Kick, Jazz Kick 1-2, 808 Kick, 909 Kick, V Kick, Techno Kick.
• Snares: Standard Snare, Rock Snare 1-2, Room Snare, Vintage Snare, Jungle Snare, Fiesta Snare, Jazz Snare, 808 Snare, 909 Snare 1-2, Elektro V Snare, Noise. (Includes rim sounds for many).
• Toms: Rock Tom 1-6, Vintage Tom 1-6, Tom Brush 1-6, 808 Tom 1-6, Electro Tom 1-6.
• Ride Cymbals: Rock Ride 1-2, Metal Ride 1-2, 808 Ride. (Includes Bell and Combo variations).
• Crash Cymbals: Rock Crash 1-2, Vintage Crash, Metal Crash, Jungle Crash, Jazz Crash, 808 Crash.
• Hi-Hats: Open, Closed, Bow Shot, Chick variations for Classic, Rock, Jazz, 808.
• Percussion: Bongos, Congas, Timbale, Agogo, Cabasa, Maracas, Whistles, Guiros, Claves, Wood Blocks, Cuica, Triangle, Shaker, Jingle Bell, Bell Tree, Castanets, Surdo.

Kits:

• Preset Kits: Acoustic, Standard, Rock, Power, Jungle, Jazz, Brush, Electronic, 808, House.
• User Kits: Slots 11-15 for saving custom configurations.

Specifications

• Inputs: 1 x 1/8" stereo (Aux Input), 1 x Multi-Pin trigger connection.
• Frequency Response: 20 Hz – 20 kHz.
• Outputs: 1 x 1/8" stereo (Phones), 1 x 6.35mm TRS (Line Out).
• Computer Connectivity: USB MIDI, Type-B.
• Polyphony: 64.
• Display Type: 3 x 8-Segment display.
• Power Supply: 9 V DC (adapter included).
• Power Consumption: 4.5 W.
• Dimensions: 840 x 580 x 330 mm.
• Weight: 16.28 kg.

Important Information

• Online Registration: Register your Music Tribe equipment at musictribe.com for faster service and warranty claims.
• Support & Malfunctions: Contact your local Music Tribe Authorized Reseller or visit musictribe.com for support and troubleshooting. Submit warranty claims online before returning products.
• Power Connections: Ensure correct mains voltage is used. Replace fuses only with identical types and ratings.
• FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to conditions that prevent harmful interference. Unauthorized modifications may void user authority.
• EU Compliance: Complies with relevant EU directives. Full text of EU Declaration of Conformity is available at https://community.musictribe.com/.