Vortice LINEO 250 Q
Ducted Centrifugal Fan | Code: 17149
Certifications
CE, UKCA, CB TEST CERTIFICATE
Technical and Performance Data
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Max absorbed current at max speed (A) | 0.50 | Sound power Lw [dB(A)] INLET - max speed | 77.2 |
| Max absorbed current at min speed (A) | 0.40 | Sound power Lw [dB(A)] INLET - min speed | 62.6 |
| Frequency (Hz) | 50 | Sound power Lw [dB(A)] RADIATED - max speed | 63.1 |
| Protection Rating IP | 44 | Sound power Lw [dB(A)] RADIATED - min speed | 53.1 |
| Insulation | Class II | Max pressure at max speed (mmH2O) | 53 |
| Weight (Kg) | 5.9 | Max pressure at max speed (Pa) | 519.9 |
| Max absorbed power at max speed (W) | 110 | Max pressure at min speed (mmH2O) | 34 |
| Max absorbed power at min speed (W) | 85 | Max pressure at min speed (Pa) | 333.5 |
| Max continuous ambient operating temp. (°C) | 60 | Sound pressure Lp [dB(A)] 3m IN SUCTION - max speed | 59.2 |
| Voltage (V) | 220-240 | Sound pressure Lp [dB(A)] 3m IN SUCTION - min speed | 45.7 |
| Max flow rate at max speed (l/s) | 275 | Sound pressure Lp [dB(A)] 3m IN DISCHARGE - max speed | 59.7 |
| Max flow rate at max speed (m³/h) | 990 | Sound pressure Lp [dB(A)] 3m IN DISCHARGE - min speed | 45.1 |
| Max flow rate at min speed (l/s) | 200 | Sound pressure Lp [dB(A)] 3m RADIATED - max speed | 42.6 |
| Max flow rate at min speed (m³/h) | 720 | Sound pressure Lp [dB(A)] 3m RADIATED - min speed | 32.6 |
| Sound power Lw [dB(A)] IN SUCTION - max speed | 76.7 | Max RPM | 2550 |
| Sound power Lw [dB(A)] IN SUCTION - min speed | 63.2 | Min RPM | 1850 |
Dimensions
The product dimensions are provided in millimeters (mm) as follows:
- Dimension A: 300 mm
- Dimension B: 322 mm
- Dimension C: 385 mm
- Dimension D: 247 mm
- Dimension E: 152.5 mm
- Dimension F: 292 mm
- Dimension G: 176.5 mm
- Dimension H: 145 mm
- Dimension L: 140 mm
- Dimension M: 5.5 mm
(Note: The original document included diagrams illustrating these dimensions. The labels A through M correspond to specific physical measurements of the fan unit.)
Description
- Construction in fire-resistant plastic resin, class E2, according to ISO EN 11925-2:2010, in areas adjacent to the motor and electrical components.
- Nominal diameter: 250 mm.
- Induction motor, thermally protected, with shaft mounted on ball bearing supports, combined with an elico-centrifugal impeller.
- High degree of water resistance: IPX5 (when installed in ducting).
- Speed controllable via Vortice regulation devices.
Performance Curves
The document includes performance curves illustrating the relationship between air flow rate (q [m³/h] or q [l/s]) and static pressure (p [Pa]). The curves typically show how the fan's performance varies with different operating conditions, such as maximum and minimum speed settings.
(Note: The original document contained a graph plotting Pressure (Pa) against Flow Rate (m³/h) and (l/s) for the LINEO 250 Q fan.)
Accessories
The following accessories are available for the LINEO 250 Q:
- LINEO-G 250 (Code: 22706)
- LINEO-SF 500 (Code: 22593)
- IREM D (Code: 12867)
- KIT SCB (TRASF.E.C.) (Code: 22481)
- IN-LINE-S 250 (Code: 22571)
- LINEO-C 250 (Code: 22589)
- LINEO-SF 700 (Code: 22594)
- LINEO-PF 250 DUO (Code: 22583)
- C 1.5 (COMANDO EL. 1.5 A) (Code: 12966)
- (Code: 22914) - *Description not specified in provided OCR.*
For Information
Italy
Pre Sales: prevendita@vortice-italy.com
After Sales: postvendita@vortice-italy.com
United Kingdom & Rep. of Ireland
Sales Dept: sales@vortice.ltd.uk
Technical Dept: technical@vortice.ltd.uk
Other Countries
Sales Dept: export@vortice-italy.com
After Sales: after-sales@vortice-italy.com
