Electric Sausage Stuffer Instruction Manual
(SEV10&SEV12&SEV15)
Content
- CHAPTER 1 | COMPANY BRIEF INTRODUCTION
- CHAPTER 2 | PRODUCT INTRODUCTION
- CHAPTER 3 | OPERATION AND CLEANING
- CHAPTER 4 | PRODUCTS EXPLODED VIEW AND SPARE PARTS LIST
WARRANTY CARD
CHAPTER 1 | COMPANY BRIEF INTRODUCTION
Thank you for choosing GGM Gastro machines. We specialize in food processing machines and have been in the field for many years. Our main products include spiral mixers, planetary mixers, meat grinders/mincers, meat slicers, meat mixers, sausage stuffers/fillers, and meat tenderizers. We have earned a reputation worldwide for good quality and after-sales service.
Please read these instructions thoroughly before using the equipment. Keep this manual for future reference.
CHAPTER 2 | PRODUCT INTRODUCTION
- The product shell is made of full stainless steel, making it safe, non-toxic, rustless, and easy to clean.
- The electric appliance uses a well-known domestic brand with stable quality.
- The product utilizes a combination of welding and screws for safety and reliability.
- The down speed is adjustable, and the current speed can be viewed on the touch panel.
- The product has CE certification.
CHAPTER 3 | OPERATION AND CLEANING
- Please read the panel instructions carefully before operating the equipment.
- Do not optionally disassemble the fixed spare parts and electric components.
- This product is available in two working voltages: 110V and 220V. Please check the voltage indicated on the machine's nameplate.
- Ensure the voltage you use matches the nameplate and that the power socket has a ground core.
- The down speed of the machine is 0-6.6 mm/min.
- Meat particles for sausage stuffing should be smaller than the nozzle diameter. Ensure the machine is operating steadily during stuffing.
- If meat gets stuck during operation, release the pedal, then press it again. Repeat this process a few times. Do not allow meat to remain stuck for extended periods to prevent accidental motor damage due to high temperature.
- Wipe the machine clean with a towel; do not use water directly, as water entering the electric components can cause damage.
CHAPTER 4 | PRODUCTS EXPLODED VIEW AND SPARE PARTS LIST
Product Specifications
| Model | Name | Volume | Weight (kg) | Size (mm) | Motor Power (KW) | Motor Rotation Speed (r/mm) | Voltage (V) | Up Speed (mm/s) | Down Speed (mm/s) |
|---|---|---|---|---|---|---|---|---|---|
| SEV10 | Electric Sausage Stuffer | 10L | 27.5 | 637*370*330 | 0.06 | 1350 | 110V/60Hz 220V/50Hz |
7 | 0-7 |
| SEV12 | Electric Sausage Stuffer | 12L | 29 | 687*370*330 | 0.06 | 1350 | 110V/60Hz 220V/50Hz |
7 | 0-7 |
| SEV15 | Electric Sausage Stuffer | 15L | 30 | 767*370*330 | 0.06 | 1350 | 110V/60Hz 220V/50Hz |
7 | 0-7 |
Spare Parts List
| NO. | NAME | QTY | NO. | NAME | QTY |
|---|---|---|---|---|---|
| 1 | Emergency switch | 1 | 26 | Cap nut | 1 |
| 2 | Top cover | 1 | 27 | Base | 1 |
| 3 | Gel column | 1 | 28 | Foot pedal | 4 |
| 4 | Electric board | 5 | 29 | Trefoil nut | 1 |
| 5 | Socket | 1 | 30 | Nozzle | 1 |
| 6 | Power core | 1 | 31 | Cylinder | 1 |
| 7 | Copper bush | 2 | 32 | Spring | 1 |
| 8 | Capacitor | 1 | 33 | Big gasket | 2 |
| 9 | Gear seat assembly | 1 | 34 | Big plunger | 2 |
| 10 | Small gear ring | 1 | 35 | Set screw | 1 |
| 11 | Small gear | 2 | 36 | Rack | 1 |
| 12 | Bearing | 1 | 37 | Magnet | 1 |
| 13 | Flat gasket | 1 | 38 | Screw | 1 |
| 14 | Ring | 2 | 39 | Inductive head | 11 |
| 15 | Bearing baffle | 1 | 40 | Lower sensor chip | 1 |
| 16 | Screw | 1 | 41 | Washer of lower sensor chip | 2 |
| 17 | Bearing washer | 1 | 42 | Bearing | 1 |
| 18 | Bearing | 2 | 43 | Bearing washer | 1 |
| 19 | Big gear | 2 | 44 | Bearing baffle | 1 |
| 20 | Big gear shaft | 1 | 45 | Motor | 1 |
| 21 | Flat key | 1 | 46 | Upper sensor chip | 1 |
| 22 | Center fixed plate | 2 | 47 | Side sealing plate | 1 |
| 23 | Exhaust pin | 2 | |||
| 24 | Inner hexagram screw | 4 | |||
| 25 | Side sealing plate | 1 |
Note: Some screws & washers are not included in the spare parts list.
Route Map
The route map illustrates the electrical connections within the sausage stuffer. Key components include the emergency switch, top cover, gel column, electric board, socket, power core, copper bush, capacitor, gear seat assembly, small gear ring, small gear, bearing, flat gasket, ring, bearing baffle, screw, bearing washer, bearing, big gear, big gear shaft, flat key, center fixed plate, exhaust pin, inner hexagram screw, side sealing plate, cap nut, base, foot pedal, trefoil nut, nozzle, cylinder, spring, big gasket, big plunger, set screw, rack, magnet, screw, inductive head, lower sensor chip, washer of lower sensor chip, bearing, bearing washer, bearing baffle, and motor. The diagram shows connections for 110V/220V AC power, with color-coded wires (Yellow, White, Black, Blue) connecting various components including switches (change-over, speed, upper limit, lower limit) and the foot pedal.
Wiring Diagram Components
| NO. | NAME | QTY |
|---|---|---|
| 1 | Emergency switch | 1 |
| 2 | Socket | 1 |
| 3 | Capacitor | 1 |
| 4 | Motor | 1 |
| 5 | Foot pedal | 1 |
| 6 | Inductive head | 2 |
WARRANTY REGISTRATION
Please type or print clearly. Fill in the following details: NAME, ADDRESS, CITY, PHONE, STATE, ZIP CODE, PURCHASE DATE, and PRODUCT MODEL. Indicate if the product was purchased for Commercial use, Personal use, or Other. Specify if the products were purchased from a Store or the Internet. This card must be sent to the store where you purchased the product to validate your warranty.
A second warranty registration section is provided with the same fields for completion.
