Greyson Horizon Bed Double

User Guide

Components

A Bolt M8x30mm (x20) [Bolt]
B Bolt M8x35mm (x4) [Bolt]
C Screw (x16) [Screw]
D M8 Nut (x4) [Nut]
E Split Washer (x8) [Washer]
F M8 Washer (x16) [Washer]
G Allen Key (x1) [Tool]
H M8 Spanner (x1) [Tool]

Diagram Description: The components section displays images of various hardware and tools required for assembly, including different sizes of bolts, screws, nuts, washers, a split washer, an Allen key, and a spanner.

Assembly Instructions

Diagram Description: The main assembly diagram shows the bed frame components labeled with numbers 1 through 9: 1 (Headboard), 2 (Left Side Rail), 3 (Right Side Rail), 4 (Leg Bracket), 5 (Center Support Beam), 6 (Support Leg), and slats 7 (Short), 8 (Long), 9 (Medium).

Step 1: Assemble Center Support Beam

Attach the two Support Legs (6) to the Center Support Beam (5). Use Bolt B (M8x35mm) and Allen Key G. Secure with M8 Nut D and M8 Spanner H.

Diagram Description: This step shows the center support beam with two support legs being attached. A close-up view illustrates using Bolt B, Allen Key G, Nut D, and Spanner H to fasten the support legs to the beam.

Step 2: Attach Side Rails and Leg Brackets

Attach the Leg Brackets (4) to the corners of the Headboard (1) and the Side Rails (2, 3). Use Bolt A (M8x30mm), Washer F (M8 Washer), Screw C (x16), and Allen Key G.

Diagram Description: This step involves attaching the four Leg Brackets (4) to the main bed frame structure. Close-up views show the process at the headboard end and the side rail ends, detailing the use of Bolt A, Washer F, and Screw C, fastened with Allen Key G.

Step 3: Attach Center Support to Headboard

Attach the assembled Center Support Beam (from Step 1) to the Headboard (1). Use Bolt A (M8x30mm) and Allen Key G.

Diagram Description: This step shows the center support beam being connected to the headboard. A close-up view highlights the connection point, indicating the use of Bolt A and Allen Key G.

Step 4: Install Slats

Place the 12 Slats (7, 8, 9) onto the bed frame, distributing them evenly across the width. There are four Short Slats (7), four Long Slats (8), and four Medium Slats (9).

Diagram Description: This step illustrates the placement of the bed slats. The diagram shows the slats (labeled 7, 8, 9) being laid across the bed frame. Close-up views show how the slats rest on the frame supports.

Need More Information?

We hope this user guide has provided the necessary assistance for a simple set-up. For the most up-to-date guide for your product, or any additional assistance, please visit help.mattblatt.com.au.

	Kyoto Sideboard User Guide - Matt Blatt User guide for the Matt Blatt Kyoto Sideboard (MBKYOTOSBRA), detailing safety warnings, component identification, step-by-step assembly instructions, and support resources.
	RECAP Sideboard (Oak) User Guide - Matt Blatt Official user guide for the Matt Blatt RECAP Sideboard in Oak finish. Includes assembly instructions, component list, and care guide for model MBRECAPSBOA.
	Kenneth Dahl Scallop Dining Chair User Guide - Matt Blatt Comprehensive user guide for the Kenneth Dahl Scallop Dining Chair by Matt Blatt. Includes detailed component list, step-by-step assembly instructions, and support information. Model MBKEDDDCSBA.
	Amber Bench Stool (Small) User Guide \| Matt Blatt User guide for the Matt Blatt Amber Bench Stool (Small), including components, hardware, and step-by-step assembly instructions. Model numbers: MBAMBBSSBBA, MBAMBBSSONA.
	Noguchi Replica Coffee Table User Guide - Assembly and Setup Comprehensive user guide for the Matt Blatt Noguchi Replica Coffee Table, detailing components, assembly steps, and support information. Includes model numbers MBNOUCHBA, MBNOUCHOA, MBNOUCHWA, MBNOUCHWNA.
	Kenneth Dahl Moe Dining Chair User Guide \| Matt Blatt Official user guide and assembly instructions for the Kenneth Dahl Moe Dining Chair by Matt Blatt. Includes component list and step-by-step assembly. Model MBKEDDDCMGA.
	Louie Arched Rattan and Solid Beech Wood Dining Chair Set of 2 User Guide User guide for the Louie Arched Rattan and Solid Beech Wood Dining Chair Set of 2 by Matt Blatt. Includes safety warnings, components, assembly instructions, and cleaning & care tips.
	Low Back Aluminum Padded Office Chair - Eames Replica User Guide User guide for the Matt Blatt Low Back Aluminum Padded Office Chair - Eames Replica, including assembly instructions and component list.