Model: MBKEDDDCMGA
Brand: MATT BLATT
Components
- 1. Chair Body
The main seating part of the chair, featuring a padded, curved backrest and seat.
- 2. Legs Assembly
The base structure for the chair, consisting of crossed legs designed for stability.
- 3. 45mm M6 Screws (x4)
Four screws of size 45mm M6, used to connect the chair body to the legs.
- 4. Allen Key
A hexagonal tool provided for tightening the screws.
Assembly Instructions
Follow these steps to assemble your KENNETH DAHL MOE DINING CHAIR:
- Attach Legs to Chair Body:
Place the Chair Body (1) upside down on a soft, clean surface to prevent scratching.
Align the Legs Assembly (2) with the attachment points on the underside of the Chair Body.
Insert the 45mm M6 Screws (3) through the designated holes in the Legs Assembly and into the Chair Body.
Use the provided Allen Key (4) to tighten all four screws securely. Ensure the legs are firmly attached and stable.
Diagram Description: The diagram shows the underside of the chair with the legs being attached. An Allen Key is shown in use to tighten a screw connecting the leg frame to the chair seat.
Need More Information?
This user guide provides basic setup assistance. For the most up-to-date information or any additional support required for your product, please visit the official Matt Blatt support website.
