Amber Bench Stool (Small)

Product Overview

This document provides a user guide for the Amber Bench Stool (Small) by Matt Blatt. It details the components, hardware, and step-by-step assembly instructions.

Components

• 1: Stool cover (x1) - The main seating surface of the stool.
• 2 & 3: Legs (x4 total) - Four legs that support the stool. Two are labeled '2' and two are labeled '3' in the diagrams, but appear functionally similar in assembly.
• 4: Rack (x1) - A crossbar component that connects the legs for stability.

Hardware

• A: Dowel (x4) - Cylindrical wooden or plastic pegs used for joining parts.
• B: Split washer (x4) - A type of washer designed to prevent loosening.
• C: Washer (x4) - Flat rings used to distribute load or prevent friction.
• D: Nut (x4) - Fasteners used with bolts or screws to join parts.
• E: Screw (x4) - Fasteners used to join materials.
• F: Wrench (x1) - A tool used for tightening or loosening nuts and bolts.
• G: Adhesive pad (x4) - Small pads with adhesive backing, likely for floor protection.

Assembly Instructions

Step 1: Prepare the Legs

Screw the dowels (A) into the top of all four legs (labeled 2 & 3).

Visual Description: Shows a dowel (A) being screwed into the top of a leg (labeled 2 or 3). A close-up shows the dowel entering a hole at the top of the leg, with a circular arrow indicating rotation.

Step 2: Attach Legs to Stool Cover

Turn the stool cover (1) upside down. Place the legs (2 & 3) with the dowel ends facing down onto the corners of the stool cover. On each dowel (A), slide a washer (C) and then a split washer (B) all the way to the end. Place a nut (D) onto each dowel (A) and tighten halfway using the wrench (F).

Visual Description: Shows the stool cover (1) upside down. Legs (2 & 3) are positioned at the corners. A close-up shows the assembly sequence on a dowel: washer (C), split washer (B), nut (D), and the wrench (F) being used to tighten the nut halfway.

Step 3: Install the Rack

Align and insert the rack (4) into the designated holes on the legs (2 & 3) to secure it in place.

Visual Description: Shows the partially assembled stool. The rack (4) is being inserted between the legs (2 & 3), with arrows indicating the insertion direction into holes on the legs.

Step 4: Secure the Structure

Using the wrench (F), fully tighten the nuts (D) on the dowels (A) until the structure is secure.

Visual Description: Shows the assembled structure. A close-up indicates the nuts (D) on the dowels (A) being fully tightened with the wrench (F), showing '100%' completion.

Step 5: Final Touches

Insert and secure the screws (E) into the holes of the rack (4). Then, peel the adhesive pads (G) and attach them to the bottom of the legs (2 & 3).

Visual Description: Shows screws (E) being inserted into the rack (4) and adhesive pads (G) being attached to the bottom of the legs (2 & 3). Close-ups show the screw insertion and the adhesive pad placement.

Step 6: Complete Assembly

Turn the bench stool right side up. Assembly is complete.

Visual Description: Shows the fully assembled Amber Bench Stool (Small) standing upright.

Need More Information?

This user guide provides assistance for a simple set-up. For the most up-to-date guide or additional assistance, please visit help.mattblatt.com.au.

Brand: Matt Blatt