Kenneth Dahl Scallop Dining Chair

Components

• Chair Body: The main upholstered seat and backrest of the chair.
• Legs Assembly: The wooden base structure for the chair legs.
• 50mm M6 Screws (x4): Four screws, each 50mm long with M6 threading, used for assembly.
• ⌀16 x ⌀6 x 1.5 Washers (x4): Four washers with outer diameter 16mm, inner diameter 6mm, and thickness 1.5mm.
• Allen Key: A hexagonal wrench tool provided for tightening screws.

Diagram Description: A visual representation of all included components: the Chair Body, Legs Assembly, four 50mm M6 Screws, four ⌀16 x ⌀6 x 1.5 Washers, and the Allen Key.

Assembly

Using the provided Allen Key, attach the Chair Body to the Legs Assembly with the four 50mm M6 screws and four washers. Ensure all connections are secure.

Diagram Description: An illustration demonstrating the assembly process. It shows the Legs Assembly being attached to the underside of the Chair Body using the 50mm M6 Screws and Washers, with the Allen Key used for tightening.

Need More Information?

We hope this user guide has provided the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, please visit the Matt Blatt support website online at: help.mattblatt.com.au.