Grille Installation Instruction
Part#: F65726C/S/J
Rev. 190301
Parts List
| Item | Part Name | QTY | Description | Item | Part Name | QTY | Description |
|---|---|---|---|---|---|---|---|
| 1 | Billet Grille | 6 | Stainless steel | 3 | Toggle Nut | 14 | 6# |
| 2 | Truss Head Screws | 14 | 6-32x1.5" |
Install Notes
Overlay: ✓ Replacement: ❌ Drill: ❌ Cut: ❌
Installation Steps
-
Step 1: Identify the grille & hardware with parts list.
Illustration: [Image of grille components]
-
Step 2: Optional: remove the plastic cover on the bottom of the OEM front bumper, which will allow access to the rear of the OEM grille.
-
Step 3: Insert the screws into the weld tab hole from front side of the billet grille.
Illustration: [Image showing screw insertion into weld tab, with labels for Weld tab, Screw, and Toggle nut. Note: Picture for reference only. This is not actual grille.]
-
Step 4: Center the billet grille onto the OEM grille. Press & insert the toggle nuts on to the rear of the OEM grille through the gap between the horizontal bars.
Illustration: [Image of grille being centered on OEM grille]
-
Step 5: Secure the grille using the toggle nuts and screws from the front side of the billet grille with a screw driver.
Illustration: [Image showing final securing of the grille]
-
Step 6: Installation completed!!!
The instruction here is for your reference only. You may need to bend the grille a little bit to adjust to fit. We strongly recommend the professional installer for best result. We are not responsible for any damage caused by the installation. Thank you for choosing our product!
