Schwaiger SOWR1000 Solar Inverter

Introduction

Congratulations and thank you for purchasing this Schwaiger SOWR1000 solar inverter. These operating instructions are intended to help you handle and operate this product safely and effectively. Please read the instructions carefully and keep them for the entire service life of the product. Ensure all parts are present and undamaged before proceeding.

General Safety Instructions

Before Commissioning

All work on electrical systems must be performed by a qualified electrician. Inform your electricity network operator about the connection. Inquire about necessary considerations and meter suitability for a mini solar system. An electricity meter without a non-return valve must be replaced. A bidirectional meter may be required. Commissioning without the correct meter is not permitted. Some grid operators may require an energy socket installation and circuit check by a registered electrician. Refer to your energy supplier's general terms and conditions.

After Commissioning

Within one month of commissioning the system, you must register it in the market master data register. Direct access is available at: https://www.marktstammdatenregister.de/MaStR. Further information and necessary documents can be found at https://download.schwaiger.de.

Product Details and Technical Specifications

Device Description

The Schwaiger SOWR1000 is a solar inverter designed for photovoltaic systems. Key components include the inverter unit, a WLAN antenna, connections for solar modules (Panel 1, Panel 2 via DC solar connectors), and an output connection (Betteri BC01). The unit features an LED indicator for status monitoring.

Connection Diagram Description: Illustrates the inverter connected to solar modules via two connection cables. A WLAN antenna is attached to the inverter. The connection cable from the solar modules uses a Betteri BC01 coupler and connects to a household plug type F.

Device Detail Description: The inverter unit is shown with mounting points. Visible components include an LED indicator, a WLAN antenna, connections for Panel 1 and Panel 2 (DC solar connectors), and an output connection labeled 'Betteri BC01 connection'.

Inverter LED Statuses

Technical Data

Operation via the NEP Viewer App

App Installation

Note: Solar modules must produce electricity during installation.

To operate the system, the NEP Viewer client application is required. Download the app by scanning the provided QR code or searching for "NEP Viewer" in your device's app store. System requirements: Android 5.0, iOS 9 and higher.

Connecting the Inverter

1. Create a customer account using the app by registering, or log in if you already have an account.
2. Connect the inverter to the solar modules. Do NOT connect the inverter to the mains (AC power) yet. The LED should flash red every second. You have 20 minutes for the installation attempt. If it takes longer, restart from step 2.
3. In the app, click on "PV plant" at the bottom.
4. Click on "Add New PV Plant".
5. Enter the required data (marked with an asterisk) and confirm the entered data with the bottom button.
6. The devices in the vicinity will now be displayed and searched for.
7. Add your device by pressing the button with the barcode icon (bottom right).
8. Scan the barcode with the serial number. If scanning is not possible, you can enter the barcode manually (top right) and select 'AP network configuration'.
9. Select "Configure Network".
10. Network Configuration Notes:
    • Ensure the router is within 5 meters of the inverter during the configuration process.
    • Pay attention to special characters, upper and lower case letters in network names and passwords.
    • Grant access to the local network.
11. Enter the network data (Wi-Fi name and password).
12. Allow the connection to the inverter network (e.g., "MI-XXXXXX") and the connection to your own home network. If the connection does not work, try again.
13. Select "Add device". A banner confirming the configuration indicates that the configuration has been successful and is complete.

Important: The serial number is the combination of characters between the two " " symbols.

Disposal

Packaging Disposal

The product is supplied in packaging made from recyclable materials to protect it from transport damage. Please dispose of it separately in the provided collection containers. For environmentally friendly disposal, contact your local waste disposal company or municipal administration.

Product Disposal

(Applicable in the European Union and other European countries with separate collection systems for recyclable materials)

Do not dispose of electrical and electronic devices or batteries with household waste. Consumers are legally obliged to return electrical and electronic devices and batteries at the end of their useful life to designated public collection points or the point of sale. Details are governed by the respective national legislation. The symbol on the product, user guide, or packaging indicates this requirement.

Disclaimer

Schwaiger GmbH accepts no liability or warranty for damages resulting from improper installation or mounting, improper use of the product, or non-compliance with safety instructions. This product is not intended for commercial use.

Manufacturer Information and Support

For technical advice, please contact Schwaiger's Technical Support if your retailer cannot assist you. Technical Support is available in German.

Office Hours: Monday to Thursday: 8:00 AM - 5:00 PM, Friday: 8:00 AM - 2:30 PM.

Service Address: Schwaiger GmbH, Würzburger Straße 17, 90579 Langenzenn.

Service Hotline: +49 (0) 9101 702-299.

Internet & Email: www.schwaiger.de | helpdesk@schwaiger.de.

Conformity

Schwaiger GmbH hereby declares that the described radio system product complies with Directive 2014/53/EU and other applicable directives. The CE marking signifies that the product meets the essential protection requirements of applicable directives and regulations. The full EU declaration of conformity is available online at: https://download.schwaiger.de.

Warranty

The warranty period begins at the time of purchase. Proof of purchase (e.g., receipt, invoice, delivery slip) is required. Keep these documents safe. Our warranty is based on our warranty conditions valid at the time of purchase. For repairs, bring or send the device to your specialist dealer.

Service Card

A service card is provided for use in case of defective devices. Please detach this side and add it to your device.