Maytag Bravos XL High Efficiency Dryer

CLEAN THE LINT SCREEN

This step involves removing lint from the dryer's lint screen before loading the dryer.

LOAD THE DRYER

Place your laundry items loosely into the dryer drum. Avoid overloading the dryer for best results.

PRESS POWER TO TURN ON THE DRYER

Locate and press the 'power' button to activate the dryer's control panel.

SELECT THE DESIRED CYCLE FOR YOUR LOAD*

Turn the cycle selector knob to choose the appropriate cycle for your laundry, such as 'normal', 'heavy duty', 'delicates', or 'timed dry'.

The control panel displays various cycle options including: Normal, Heavy Duty, Bedding, Delicates, Sanitize, Rapid Dry, Steam Refresh, Wrinkle Control, Power Dry, Denim, Timed Dry, Air Only.

Temperature settings include: High, Medium, Low.

Dry level settings include: More, Normal, Less, Damp Dry.

ADJUST CYCLE SETTINGS, IF DESIRED*

Use the '+' and '-' buttons to adjust settings like 'cycle time' or 'timed dry adjust'.

ENERGY SAVER

Activate the ENERGY SAVER setting to increase your energy savings. This setting uses a slightly lower heat level and extends cycle time. Turn off for optimal cycle times. Turn on for optimal energy savings. The ENERGY SAVER will default on for NORMAL. NOTE: Energy savings may vary across loads and cycles.

SELECT ANY ADDITIONAL OPTIONS*

Choose from additional options like 'Wrinkle Prevent', 'Steam', 'Steam Refresh', 'Static Reduce', 'Check Vent', 'Check Lint Screen', 'Audio Signal', and 'More/Less' for dry level or cycle time.

TOUCH AND HOLD START/PAUSE TO BEGIN CYCLE

Press and hold the 'START/PAUSE' button to begin the selected drying cycle.