MiBoxer 3 in 1 LED Strip Controller

Product Features

This product utilizes WiFi + Bluetooth + 2.4G wireless transmission technology, offering low power consumption and strong anti-interference capabilities. The combined WiFi and Bluetooth connectivity enhances the network experience. If the router disconnects, Bluetooth allows direct control of equipment at close range. After successful network configuration via the [Tuya Smart] app, users can achieve wireless dimming, remote control, group control, scene control, timing control, music synchronization, biorhythm, sleep plans, wake plans, one-key execution, and automation.

• ? 16 Million colors to choose
• ?️ Color temperature adjustable
• ? Dim brightness / Saturation
• ? 2.4G RF wireless transmission technology
• ? WiFi wireless control, support long-range control
• ? Auto-transmitting & Synchronization (only for remote control dimming)
• ? Device sharing
• ▶️ Tap-to-Run & automation
• ⏰ Timing setting / countdown turn on / off LED light
• ?️ DMX512 controllable (Only for RGB+CCT output mode, DMX512 LED transmitter is needed)
• ? Remote control (Control distance 30m)
• ? Smartphone app control
• ?️ Support third party voice control
• ?‍?‍? Group control
• ? Biorhythm
• ? Support music rhythm
• ?/☀️ Sleep / wake up plan
• ✨ Support scene customization
• ? "Do Not Disturb" mode

Setup

Set up output mode

Set up the correct output mode based on the feature of your lights. To change the mode, press the [SET] button continuously. The device will log out without operation within 3 seconds.

Output mode sheet (confirm output mode based on indicator color):

Compatible with these 2.4G RF remote controls (Purchased separately)

The MiBoxer 3-in-1 LED Strip Controller is compatible with various 2.4G RF remote controls. These include models such as FUT100, FUT089S, FUT089, FUT089-B, FUT088, FUT092, FUT092-B, FUT096, FUT096-B, B0/B0-B, B4/B4-B/T4, B3/B3-B/T3, S2-B / S2-W, S2-G, and FUTD01.

2.4G RF Remote Control Instructions

1). Linking Code Instructions

Step 1: Power off the controller for 10 seconds, then power it on again, or short press the [SET] button once.

Step 2: Within 3 seconds, short press the [|] button 3 times.

Step 3: The lights will blink 3 times slowly, indicating successful linking.

Note: Linking may fail if the light does not blink slowly. Please follow the steps again. Lights that have already been linked cannot be linked again.

2). Unlinking Code Instructions

Step 1: Power off the controller for 10 seconds, then power it on again, or short press the [SET] button once.

Step 2: Within 3 seconds, short press the [|] button 5 times.

Step 3: The lights will blink 10 times quickly, indicating successful unlinking.

Note: Unlinking may fail if the light does not blink quickly. Please follow the steps again. Lights that have not been linked do not need to be unlinked.

3). Auto transmitting & Synchronization (only for remote control)

Remote signal auto transmitting: One light can transmit remote signals to another light within 30m. As long as there is a light within 30m, the remote control distance can be limitless.

Dynamic modes auto synchronization: Multiple lights can synchronize if they are in the same dynamic mode and linked with the same remote (distance between each light is within 30m).

[Diagram description: A remote control is shown transmitting a signal to a controller, which then transmits to another controller. The text indicates a 30m distance limit for auto-transmitting/synchronization.]

4). Dynamic mode table selection (only for remote control)

Select dynamic mode table 1: While the light is in static mode, short press the [S+] button 5 times quickly. The light will flash blue 3 times slowly, indicating successful activation of static mode.

Select dynamic mode table 2: While the light is in static mode, short press the [S-] button 5 times quickly. The light will flash yellow 3 times slowly, indicating successful activation of static mode.

Dynamic mode table 1 (default)

Dynamic mode table 2 (need to switch manually)

5). PWM high frequency / low frequency switching (only for remote control)

Switch to high frequency (16KHz): Press the [OFF] button 1 time within three seconds and then press the [ON] button 5 times. Activation is successful when the LED light flashes 2 times quickly.

Switch to low frequency (250Hz): Press the [ON] button 1 time within three seconds and then press the [OFF] button 5 times. Activation is successful when the LED light flashes 2 times slowly.

"Do Not Disturb" Mode

Activation and Shutdown (default activated):

Turn on “Do Not Disturb” mode: This mode is useful in areas prone to frequent power failures, helping to save energy.

2.4G RF Remote turn on and turn off instruction:

Turn on "Do Not Disturb" mode: Press the [OFF] button three times within three seconds, then press the [ON] button three times. Activation is successful when the LED light flashes four times quickly.

Attention: Do not disturb mode is activated

• When the light is OFF status (e.g., controlled via app or remote to turn off): The light remains OFF after power is turned off and then on again. The user must turn the power off and on twice, or use the app/remote to activate the light.
• When the light is ON status: The light remains ON after power is turned off and then on once.

Turn off "Do Not Disturb" mode: Press the [ON] button three times within three seconds, then press the [OFF] button three times. Shutdown is successful when the LED light flashes four times slowly.

Attention: The light will always be in the "ON" status if you turn it on and off once after closing "Do Not Disturb" mode.

App turn on and off “Do Not Disturb” mode instruction: Please check details in page 8.

Smartphone App Control Instruction

Network Configuration (Don't support 5G router)

1. Download and install [Tuya Smart] app: Search for [Tuya Smart] in the Apple or Google store. Alternatively, scan the provided QR code to download and install the app. Upon first use, open the app and click the [Register] button to create an account. Log in directly if you already have an account.

[Screenshot description: A mobile phone screen showing the Tuya Smart app interface with options to add a device. The main screen shows current weather and device status. The "Add Device" screen is displayed, with categories like Electrical, Lighting, Sensors, etc. The "Lighting" category is selected, showing various light source types, including "Light Source (BLE+Wi-Fi)".]

2. Network Configuration Steps:

1. Connect the controller to the power supply.
2. Confirm the indicator light is flashing quickly (2 flashes per second). If not, either long press the [SET] key until the indicator light flashes quickly, or power the controller off and on 3 times.
3. Connect your phone to a 2.4GHz WiFi network.
4. Open the app homepage and click the [+] button in the upper right corner.
5. Click "Lighting" on the left side of the page, then click "Light Source (BLE+Wi-Fi)".
6. Follow the app prompts to complete the configuration.

App turn on and off “Do Not Disturb” mode (default activated):

Click the light that needs to be set up or group controlled. Then, click [More] -> click [Power-on behavior] -> to turn on or off.

[Screenshot description: A sequence of three mobile phone screens. The first shows a list of devices, with "5 in 1 Controller" selected. The second screen shows options like "Power Memory", "Do Not Disturb", and "Automation". The third screen specifically shows the "Do Not Disturb" toggle being turned on.]

Voice Control Instruction

Alexa voice control instruction

Please add the device into the [Tuya Smart] app first (check details in page 7), then follow these steps:

1. Open the Alexa App.
2. Click "More" on the bottom right corner.
3. Click "Skills & Games".
4. Click the search icon [Q] on the top right corner.
5. Type "Smart Life" and search.
6. Click the "Smart Life" skill, follow the instructions to finish configuration and start voice control.

[Screenshot description: A sequence of mobile phone screens showing the Alexa app. First, the "More" menu is shown. Then, "Skills & Games" is selected. The search screen appears, with "Smart Life" typed in and results shown. Finally, the "Smart Life" skill page is displayed.]

Google Home voice control instruction

Please add the device into the [Tuya Smart] app first (check details in page 7), then follow these steps:

1. Open the Google Home App.
2. Click the [+] icon on the top left corner.
3. Click "Set up device".
4. Click "Works with Google".
5. Click the search icon [Q] on the top right corner.
6. Type "Smart Life" and search.
7. Click the "Smart Life" skill, follow the instructions to finish configuration and start voice control.

[Screenshot description: A sequence of mobile phone screens showing the Google Home app. First, the home screen with the "+" icon is shown. Then, "Set up device" is selected, followed by "Works with Google". The search screen appears, with "Smart Life" typed in and results shown. Finally, the "Smart Life" skill page is displayed.]

DMX512 LED Transmitter Control (Purchased separately)

This feature is only for RGB+CCT output mode.

[Diagram description: Shows a DMX512 Transmitter connected to a DMX512 Control Panel. The transmitter sends a 2.4GHz Wireless Signal to multiple LED controllers, labeled "1 Zone" and "16 Zone", indicating limitless control range as long as controllers are within range of each other.]

DMX512 LED Transmitter Link/Unlink

Follow the instructions for the DMX512 transmitter (FUTD01). Choose the zone for the light by pressing "+" or "-" (e.g., "CH12" means zone 12).

Link

Step 1: Power off the controller for 10 seconds, then power it on again, or press the [SET] button once.

Step 2: Within 3 seconds, short press the [SET] button 3 times while the controller's indicator is ON.

Step 3: Linking is done when the controller's indicator flashes 3 times slowly.

Unlink

Step 1: Power off the controller for 10 seconds, then power it on again, or press the [SET] button once.

Step 2: Within 3 seconds, short press the [SET] button 5 times while the controller's indicator is ON.

Step 3: Unlinking is done when the controller's indicator flashes 10 times quickly.

[Warning symbol: ⚠️] If the link or unlink failed, please follow the above steps again.

Attention

1. Please turn off the power supply before installation.
2. Please ensure the input voltage matches the requirements of the device.
3. Do not disassemble the device if you are not an expert, as it may cause damage.
4. Please avoid using the light in areas with large metal surfaces or strong electromagnetic waves nearby, as this can seriously affect the remote control distance.

Scan the QR code to watch the WiFi series video instruction, or enter the following link directly: https://miboxer.com/light/video/wifi_2.html

[Compliance Marks: CE Mark, UKCA Mark, RoHS Compliant]

Made in China